Spool for Fairy Lights String

spool for fairy lights.3mf

Inland Filament Roll Tray RH.stl

filament roll filler v5.stl

Skinny Spool v3 (3mm rim w_center lip) Bottom Double Center

Skinny Spool v3 (3mm rim w_center lip) Bottom Double Center.stl

Filament Spool Stabilizer

The spool holder that came with my AnyCubic Vyper is not parallel with the ground, causing the spool to naturally slide to one side of the spool holder. 

If there's an overlap in the filament spool, it could cause the spool to jump off the spool holder.

I've created a bracket that easily slides into the spool and locks onto the spool holder. 

-No Support
-20-100% Infill

Ender 5 Spool holder

Ender 5 Spool holder.step

Ribbon Spool

Spool_1_8.3mf

Handline Fishing Reel

Handline fishing reel.STL

Low Friction Spool Holder Adapter

Low Friction Spool Holder Adapter

Are you like me and upgraded your bowden tube, but held on to the old one?

Well you are in luck!  Use it as part of this adapter to reduce friction between your spool and the spool holder.

Designed primarily for the Ender 3, but any similar spool holder should work.

Yes this is a mashup, however it does have significant changes and qualifies as unique work.  See license.txt for more details.

1. Cut two bowden tubes to fit in side of each track.
2. Remove the tube from your spool holder and snap on the adapter.
3. Put the tube back on the spool holder.
4. Enjoy

- Easy snap fit!
- Bowden tubes are low friction by design.
- The curved shape further reduces friction by limiting contact with the spool to two points.
- The curved shape uses gravity to keep the spool centered on the spool holder.

Supports are required. I would suggest using support blocker on the bowden tube holes, they seem to print fine.  

* I used tree supports and a brim.
* I printed at 5° hotter than normal to help with layer adhesion.
* I printed at 0.12 for a smoother look. However during testing I printed at 0.2 and it worked without issue.


Rope Lamp

Rope Bottom.3mf

Bambu filament spool inlay

bambu_spool_inlay.3mf

The Virtual Foundry Spool Holder Hub

Spool Hub 2022.stl

Overture Spool Insert

Spool insert for Overture's cardboard spools.

This insert allows the spool to work with bearing-based support spool holders.  This insert is also compatible with the Spool System by sideways design found on Thingiverse.
https://www.thingiverse.com/thing:1002299

Be sure to print this with the lip of the insert on the print bed.

Filament spool keyring

Filament Spool Keyring

UMO+ extended spool holder 170mm

Extended length spool holder fitting into the precut mounting holes in the back panel of the wooden Ultimaker Original+. 170mm length of smooth spool stand/rod allows you to easily fit 2 1kg filament spools on it for dual filament printing. 

If printing in an enclosed cabinet or hot environment, I recommend printing this is Polycarbonate (ex: Polylite PC) to prevent sagging over time. 

This is modified from another spool holder by deepthought at https://www.thingiverse.com/thing:138604

SPOOL

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Spool for Fairy Lights String

Inland Filament Roll Tray RH.stl

Skinny Spool v3 (3mm rim w_center lip) Bottom Double Center

Filament Spool Stabilizer

Ender 5 Spool holder

Ribbon Spool

Handline Fishing Reel

Low Friction Spool Holder Adapter

Rope Lamp

Bambu filament spool inlay

The Virtual Foundry Spool Holder Hub

Overture Spool Insert

Filament spool keyring

UMO+ extended spool holder 170mm

Spool Weight

Spool Keychain - No Multicolor System

SP2棍子.3mf

Spool Bearing

BambuX1SpoolHolder.stl

Stubby Spool (3mm rim w_center lip)