This snap-together, scalable, modular USB drive storage system uses a rotating 2-stage spring-driven push-push style system to elevate your USB drives and store them with style.  You can use it to store an unlimited number of drives as well as configure the structure with or without separating walls and end walls.  

The device is 100% printed; no hardware or metal springs are required.  The compliant springs built into the design are resilient enough for repeated use.  The end wall can be used on either end, both ends or in between the USB drive holders.

I will post a video showing the assembly shortly.

**Limited-Time Offer**
Get it for FREE now! Please collect, like, and download this model to support me in league competitions. Your support makes a huge difference—thank you!

Print Settings
For the best results, use these settings:
* Material: PLA (this design is optimized for PLA)
* Nozzle: 0.4mm
* Layer Height: 0.2mm
* Line Width: 0.4mm
* Wall Count: 4 (1.6mm)
* Top and Bottom Layer Count: 5
* Detect Thin Walls: ON
* Wall Generator: Arachne
* Infill: 40% (Cubic)
* Brim: No
* Support: No

UPDATE 2025-01-08: 
- It was just brought to my attention that the receiver part I uploaded did not have the support piece included.  I have re-uploaded that now and it should print much better with that.  Please download it again and print the new part titled "USB Rack 1v00c receiver with support.stl". 
- I have also now added an XL version of the base and wall.  These parts are indicated with the XL in their file name.  The original design will accommodate a USB drive body of up to 42mm and the XL will accommodate a body of up to 66mm in length.  

Additional Info
Visit my blog for more details and other exciting designs: https://www.logicalplanet.com/





USB Drive Storage Rack (Modular, Push to Open)

USB Rack 1v00b base.stl

USB Rack 1v00b receiver.stl

USB Rack 1v00c hex wall XL.stl

USB Rack 1v00c base XL.stl

The definition of chaos is complete disorder and confusion- this sculpture features a triple pendulum which devolves in to a chaotic movement when you start moving it side to side. Using paddles connected to rack and pinions, you can control the chaos by pressing on the paddles. 

The STL File:
Prints on all standard 3d printers, requires no additional tools or assembly. This video shows how to assemble it!
https://youtu.be/GuIfRCekvZI?si=Epl9jBimZcqmcq4M

Recommended print settings:
Layer Height: 0.2mm
Nozzle: 0.4mm
Infill: 15-18% 
Total Print Time: ~10 hours
Total Material: ~200g

**All the files have been pre-oriented to save you some set up time! All you need to do is drop the parts into your slicer and hit print!﻿

The Triple Pendulum Chaos Creator

Full Build (10h - 200g).stl

❗ *You may only use this file for personal purposes, and you are not authorized to sell either the file or any printed items derived from it.* 
❗ To legally sell physical prints of this and all other designs without paying individual licensing fees, an active monthly Patreon Subscription is required. [BNS3d Patreon!](https://www.patreon.com/c/bucklenshackle/shop?)

❗If you would like a one time purchase commercial license to sell [click here: ](https://cults3d.com/en/creations/dice-vial-modular-display-commercial-use-version)

- - -

Do you have a collection of Dice? Do you Sell Dice Sets at your Local Craft Shows? Download the Dice Vial Modular Display to showcase your collection or wares in an exciting way!

- - -

**Can be Set up in any combination you like.**

- REQUIRES an (8mm) Linear Motion Rod Length of your Choice.
- REQUIRES Test Tube Vials of atleast 1" (25mm) Wide that has a flange at the top or a cap that is wider than the tube. To fit 7 Dice (20mm), you need a vial that is atleast 5.5" (140mm) Long [A 2mm Tolerance is added to the inserts as some plastic tubes are not uniform]
- OPTIONAL 6x One Inch (25mm) Felt/Rubber Pads

**EXAMPLE IN PHOTOS:**

- 8mm x 350mm of 600mm Linear Motion Rod, (these can be bought in pairs of 2 on Amazon for around 10-15$), 

- 25mm x 140mm Plastic Test Tubes with flange at top (mine are 45ml)

Pieces Used for 350mm Rod: Base, 50mm, 12 Insert, 125mm, 8 Insert, Top Sign Holder, 2x D20 Sign.

Pieces Used for 600mm Rod: Base, 50mm, 24 Insert, 150mm, 16 Insert, 150mm, 12 Insert, 35mm, Top Sign Holder, 2x D20 Sign.

- - -

**Personal Use Version Includes:**

- Dice Vial Modular Display - Base (With Bucklenshackle.com  Branding) 8.1/8.3/8.5mm Tolerance Versions
- TOLERANCE TEST
- Dice Vial Modular Display - 10mm Cylinder
- Dice Vial Modular Display - 15mm Cylinder
- Dice Vial Modular Display - 25mm Cylinder
- Dice Vial Modular Display - 35mm Cylinder
- Dice Vial Modular Display - 50mm Cylinder
- Dice Vial Modular Display - 75mm Cylinder
- Dice Vial Modular Display - 100mm Cylinder
- Dice Vial Modular Display - 150mm Cylinder
- Dice Vial Modular Display - D20 Sign - Blank
- Dice Vial Modular Display - Top Sign Holder
- Dice Vial Modular Display - 8 Vial Insert - 27mm
- Dice Vial Modular Display - 12 Vial Insert - 27mm
- Dice Vial Modular Display - 16 Vial Insert - 27mm
- Dice Vial Modular Display - 24 Vial Insert - 27mm
- Dice Vial Modular Display - 8 Vial Insert - 29mm
- Dice Vial Modular Display - 12 Vial Insert - 29mm
- Dice Vial Modular Display - 16 Vial Insert - 29mm
- Dice Vial Modular Display - 24 Vial Insert - 29mm
- Dice Vial Modular Display - D20 Sign - No Words
- Dice Vial Modular Display -  D20 Sign - Pick Your Poison Vial of Dice $5
- Dice Vial Modular Display -  D20 Sign - Pick Your Poison Vial of Dice $10
- A 3MF Painted File Dice Vial Modular Display -  D20 Sign - Pick Your Poison Vial of Dice MMU PAINTED.3MF

___

**Updates:**

May 7th - I have added another set of Vial Inserts with Larger Holes to fit wider Test Tubes. It can be used with some Test Tubes that are upto 25mm or 27mm Wide that either have a flange or have a Cap that is larger (so they don't fall through)

June 5th - I have added a new $10 Sign and updated the MMU.3mf File

**What's Compatible?**

Test Tube Vials of atleast 1" (25mm) Wide that has a flange at the top. To fit 7 Dice (20mm), you need a vial that is atleast 5.5" (140mm) Long  [these are generally marketed as 45ml]

Test Tube Vials of atleast 1.06" (27mm) Wide that has no flange at the top its just a cap that is wider than the tube. To fit 7 Dice (20mm), you need a vial that is atleast 5.9" (150mm) Long [these are generally marketed as 65ml]

[A 2mm Tolerance is added to the inserts as some plastic tubes are not uniform]

Only 8mm Linear Motion Rods can be used in any length. Print the tolerance test first to ensure the rod is secure in the base.

___

Designed by Buckle N' Shackle

- - -

**License and Modifying:**

- You are authorized to: Print this item for personal use, give away a printed as a gift, or donate to charity.
- Only the D20 Signs can be modified with Text/Logo

- What is not allowed: No Selling, No sharing of files, No Adapting or remixing of my file, no modifying this file with any Text & Logo.

If you would like a one time purchase commercial license to sell [click here: ](https://cults3d.com/en/creations/dice-vial-modular-display-commercial-use-version)

- - -

**Adding Attributions:**

*Printing my item? I would really appreciate it, if you tag me and credit me @bucklenshackle on Socials.*

Please do one or all of the following: Add Buckle N' Shackle, tag my socials @bucklenshackle, add a link to this cults3d page or my website*

- - -

**Authorized Sellers** For a list of all their socials [Click Here: Authorized Sellers List](https://www.bucklenshackle.com/authorized-sellers)

*Authorized Sellers will be listed on my website when you purchase the commercial license. Please contact me to get your details added.*

- - -
*Printing my item? I would really appreciate it, if you tag me and credit me @bucklenshackle on Socials.*


Rack

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

USB Drive Storage Rack (Modular, Push to Open)

The Triple Pendulum Chaos Creator

Dice Vial Modular Display - Personal Use