9 mm Big Thread, Flat Head, Small Thread Hole, Shank Bolt

9 mm Big Thread, Flat Head, Small Thread Hole, Shank Bolt.stl

Ironman.stl

3D Printable Ironman Model 
Free STL
Check our one-handed ironman Print; We faced some problems in Print
Show your final output 

Print Ironman 


Butterfly Fridge Magnets

Butterfly Fridge Magnets.3mf

Aurelius Articulated Dragon Mesh Mayhem

Aurelius Articulated Dragon Mesh Mayhem.3mf

Curled Articulated Shark

Mother and Child Ornament

Mother and Child.stl

Puzzle Wall Shelf

Puzzle_Shelve_1_EniNiDesign.stl

Puzzle_Shelve_2_EniNiDesign - Black Plastic

Puzzle_Shelve_2_EniNiDesign - Blue Plastic

Puzzle_Shelve_2_EniNiDesign - Gray Plastic

Puzzle_Shelve_2_EniNiDesign - Green Plastic

Puzzle_Shelve_2_EniNiDesign - Orange Plastic

Puzzle_Shelve_2_EniNiDesign - Red Plastic

Puzzle_Shelve_2_EniNiDesign - White Plastic

Puzzle_Shelve_2_EniNiDesign - Yellow Plastic

Puzzle_Shelve_1_EniNiDesign - Black Plastic

Puzzle_Shelve_1_EniNiDesign - Blue Plastic

Puzzle_Shelve_1_EniNiDesign - Gray Plastic

Puzzle_Shelve_1_EniNiDesign - Green Plastic

Puzzle_Shelve_1_EniNiDesign - Orange Plastic

Puzzle_Shelve_1_EniNiDesign - Red Plastic

Puzzle_Shelve_1_EniNiDesign - White Plastic

Puzzle_Shelve_1_EniNiDesign - Yellow Plastic

Halloween Skeleton Turtle - A Spooky and Fun Toy

BODY.stl

Egg Snaps

Display only do not print.stl

Minimalist Dual Pen Post-It Holder

Post-It Holder.stl

The Reading Dragon Book Nook

DRAGON- The Reading Dragon Book Nook.stl

Spiralis Fidget Toy

Helicone.3mf

Goku Bust Kamehameha - DBZ - Fan Art - FREE VERSION

Goku Bust - Free Version.stl

Dragon Eggs / Small Dragon Egg Lamp

Hey,
these were test prints for my dragon egg lamp, but they are pretty cool on their own.
They are lithopanes so you could use them as a lamp or light them from inside.
However, if you scale them they could lose that effect.
Print them without supports and move them inside the print bed a little if you want them to stand straight.

PERFIS – Minimalist 3D Printed Tabletop Perfume Shelf

PERFIS tabletop shelf.3mf

Articulated Crab in Shell 

Crab_in_ShellFinal.obj

Spiral Christmas Balls

#Summary
These are a quick, fun, and are very lightweight. Each ball has the same cross-section and twist. The main differences are the size and number of arms.

* Large ball: 80mm diameter, weighs less than 17g, takes about 6 hours to print
* Small ball: 56mm diameter, weighs less than 9g, takes about 3 hours to print

These are part of my [Christmas Collection](https://www.thingiverse.com/dazus/collections/christmas-collection).

I designed these using Affinity Designer (for cross-sections) and Blender (everything else).

The arms need support at multiple points to keep from warping and breaking if you're using an FDM printer. To make this quick and easy, I provided a version of each ornament with built-in supports. I still had Cura add supports, but only where the balls touch the build plate. For details, se the print settings below.

#Print Settings
##Basics

* Layer Thickness: 0.15mm
* Walls: 0.4mm (1 line)
* Top/Bottom thickness: 0.45mm (3 layers)
* Build Plate Adhesion: Brim

If you have holes in your print (from the thin walls), I recommend increasing flow and/or print temperature. You might also decrease print speed and travel speed (I use 30mm/second and 80mm/second).

##Infill

Infill is optional. They should print OK without it, but I added some just at the bottom of each ball. I used Cura's Support Blocker and Per Model Setting's "Modify Settings for Overlaps" to add 20% infill (Lines pattern) for the first 51mm for the large ball and 37mm for the small ball.

##Supports

I recommend using the versions of the balls with built-in supports. You'll still need a little support for the first few layers (where the ball touches the build plate), but my supports make printing the arms of the ball easy. You can remove my supports with your bare hands (no tools) and they leave little or no marks on the print.

I recommend printing these with Cura-generated supports "touching buildplate" with a 60-65 degree overhang angle and a brim for the supports.

For support infill, use Concentric pattern, 10% density. Roof density of 75%, floor density of 50% works well and releases cleanly.

The small ball doesn't need any supports for the inside roof. I found it printed very cleanly. 

The large ball printed well enough for my taste without supports for the roof. It print was a little rough, but it only shows if you pick the ornament up and look up from the bottom of the ornament. When it's hanging on a tree, you'll never see that part of it. There's enough space between the arms of the ornament that you could get tools in to cut up and remove supports if you want to add them, but I don't think it's worth the effort.

R

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

9 mm Big Thread, Flat Head, Small Thread Hole, Shank Bolt

Ironman.stl

Butterfly Fridge Magnets

Aurelius Articulated Dragon Mesh Mayhem

Curled Articulated Shark

Mother and Child Ornament

Puzzle Wall Shelf

Halloween Skeleton Turtle - A Spooky and Fun Toy

Egg Snaps

Minimalist Dual Pen Post-It Holder

The Reading Dragon Book Nook

Spiralis Fidget Toy

Goku Bust Kamehameha - DBZ - Fan Art - FREE VERSION

Dragon Eggs / Small Dragon Egg Lamp

PERFIS – Minimalist 3D Printed Tabletop Perfume Shelf

Articulated Crab in Shell

Spiral Christmas Balls

Unicorn Goose Gear for Porch Goose

Captain America Bust (Pre-Supported)

Vision Hand Jewelry Holder & Sculpture