Elegant Phone holder For Iphone 7

I think I have a Iphone 7 and thats what I used to base my stand of off. if you have a wider phone you may want to print it so it will be wider. if your phone is slightly larger it should still work.
the swoop at the bottom is slightly too big for my phone but it does function.

I printed mine with a .4mm nozzle. the walls are 1.6mm thick meaning there is 4 layers of filament per wall. The object should be printed laying flat and you may need to lower the model  by -.1mm to get it to touch the plate properly.

Created by B._.render
CC-BY-NC

Fox phone holder

Phone Galazy A54 Ohsnap Alignment.3mf

Print with 0 top and bottom layers and 15%+ infill.

Designed for use with Crave Samsung Galaxy A54 Case from Amazon

https://www.amazon.com/Crave-Samsung-Galaxy-Shockproof-Protection/dp/B0BRKDTZSM

Design is in no way affiliated with or endorsed by Samsung or Ohsnap.

Print in Place Quadlock Mag Phone Stand - Wind

This is a remix/redesign based on a model by Clockspring3D.  I wanted to design it to fit on my smaller print bed and add additional designs for your personal taste.

It has been designed for the Quadlock MAG head to fit both the magnetic only and magnetic with wireless charging.  Please check here for more info on the Quadlock Mag system.
https://www.quadlockcase.com/collections/mag

It is a “Print in Place” design, printed flat and rotates on an internal hinge to 30 degrees from vertical for optimal viewing.  The Mag head mounts to the stand (5mm bolt included with the QL head) and has a channel up the middle to run a USB cable into the head.

Smaller print beds will require this to be printed at a 45-degree angle (for beds that are approx. 200x200).

For those that don’t use a Quadlock phone case, I have uploaded adapters for iPhone Magsafe and Snapmount users.
Apple Magsafe Adapter:
https://than.gs/m/858198
Snapmount Adapter:
https://than.gs/m/858228

Bed frame phone holder

Print in Place - Pocket - Folding Phone Stand! Portable Phone Stand! 

PIP HEX PHONE STAND - FINAL.stl

Phone Eater Baby Dragon

**No supports or assembly required. Just slice and print!!**

Version v2 improves the jaw joints, now stronger.

[Video](https://youtu.be/3ZtwMmo9m8Y)



Print in Place Quadlock Mag Phone Stand - Water

Print in Place Quadlock Mag Phone Stand - Water.stl

Apple Magsafe Adapter.3mf

This adapter converts my "Print in Place" Quadlock Mag Phone stands to be Apple Magsafe  compatible.  The Magsafe unit doesnt will need to use double face tape to hold it in place, as it doesnt have a hole for the bolt/nut in this design.

The World's First Cellphone

Sample First Cellphone.stl

Toilet Paper Holder With Phone Plate.stl

Meant for phones around 90mm wide. Screw holes are 4mm wide and accommodate chamfered screw heads.

Phone Stand

Adjustable Phone Stand Rework

adjustable_phone_stand_rework-cradle.stl

Frame Phone Holder

phone2.stl

Adjustable Phone Stand

adjustable_phone_stand-arm.stl

Octopus Stand

MagSafe Phone Dock.stl

Keep an eye on your VERY important notifications while topping up your battery! This phone charger fits the Gridfinity modular storage system, and is designed to hold [a particularly powerful Qi wireless charger](https://www.amazon.com/dp/B09HBFNQBR?psc=1&ref=ppx_yo2ov_dt_b_product_details). I designed it for my iPhone 14, but it should fit nearly any phone, even in an EXTRA THICC case.

To prevent damage, the adapter DOES NOT friction-fit. You will need a thin double-sided tape like carpet tape, or a removable adhesive like E6000.

Magnets or screws are VERY STRONGLY RECOMMENDED! Your phone wants to faceplant. It was born to die.

Fusion source: https://a360.co/3uoOinb

Gridfinity is the ultimate organizer for your whole workshop! Learn more at

Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Gridfinity Tips!

All storage blocks are compatible with all baseplates!
You can add [6x2mm magnets](https://amzn.to/3UuuJV9) to the corners!
You can also use [M3 screws](https://amzn.to/3VRrS9T) to secure the corners.

Phone Bracket for 07-14 Chevy Tahoe Suburban Avalanche

This is a phone bracket I made for my 07 Avalanche. It clips on to the dash between the center air vents and you can attach any phone holder that has a ball/socket type connection to it. It doesn't block the vents and has been pretty solid for me. 
I'm not great with 3D modeling so I'm sure others can improve on it. I think it prints best on its side. I used PETG and it has held up for a couple years so far.

I used this with this Apple magsafe charger mount: https://a.co/d/7ibyCk6


A simple phone stand

I designed this to be a simple print, that doesn't require support. This will hold most smartphones, with cases on. 

Phone

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Elegant Phone holder For Iphone 7

Fox phone holder

Phone Galazy A54 Ohsnap Alignment.3mf

Print in Place Quadlock Mag Phone Stand - Wind

View 10 new models

View 11 new models

View 27 new models

Print in Place Quadlock Mag Phone Stand - Water

Apple Magsafe Adapter.3mf

The World's First Cellphone

Toilet Paper Holder With Phone Plate.stl

View 17 new models

Adjustable Phone Stand Rework

Frame Phone Holder

View 25 new models

Octopus Stand

MagSafe Phone Dock.stl

Phone Bracket for 07-14 Chevy Tahoe Suburban Avalanche

View 31 new models

Snowshoe Phone Holder