Portable Mobile Stand

MH Assembly.stl

Apple Magsafe Adapter.3mf

This adapter converts my "Print in Place" Quadlock Mag Phone stands to be Apple Magsafe  compatible.  The Magsafe unit doesnt will need to use double face tape to hold it in place, as it doesnt have a hole for the bolt/nut in this design.

Nova Nesting Trio: Minimalist Desk Organizer Set

all.3mf

Bathroom Cell Phone Magazine Stand

bathroomStand1stTierSidePanelCornerGripBack.stl

Phone Hanger

it fits a 19mm desk , it can fit a smaller one , and it fits all the phones and tablets.
you can see how  i made it here 
https://youtu.be/Hi1A2535rx8

Doraemon Playground Pipes

pipes-modelmakers.stl

2013 F150 Phone Holder

truck dash mount sleeve.stl

Yet another phone stand

yet_another_phone_stand.3mf

Miniature Smartphone Earrings

A small charm with added loupe for mounting.  An easy build that requires minor gluing.  Best printed using resin in batches.  There is usually a little spoilage in removal when you print this small.  Use 1 or maybe 2 sprues per piece.

Disclaimer:  Please refer to the manufacturer of your resin for associated health risks. Please take proper steps to cure your prints properly and follow all directions for making resin prints wearable safely. Machenna56k claims no responsibility for the safe handling of printed items created from these files.

Super Simple Phone Holder 📱

Simple Phone Holder Full Friakrte3D.stl

Heart Phone Stand

Heart Phone Stand-Thank you.stl

Hex Phone Holder

Hex Phone Holder.stl

Elegant Phone holder For Iphone 7

I think I have a Iphone 7 and thats what I used to base my stand of off. if you have a wider phone you may want to print it so it will be wider. if your phone is slightly larger it should still work.
the swoop at the bottom is slightly too big for my phone but it does function.

I printed mine with a .4mm nozzle. the walls are 1.6mm thick meaning there is 4 layers of filament per wall. The object should be printed laying flat and you may need to lower the model  by -.1mm to get it to touch the plate properly.

Created by B._.render
CC-BY-NC

Cactus Vase - Cactus Series

Cactus_Series-Vase_Holoprops.3mf

Print in Place Quadlock Mag Phone Stand - Hearts

This is a remix/redesign based on a model by Clockspring3D.  I wanted to design it to fit on my smaller print bed and add additional designs for your personal taste.

It has been designed for the Quadlock MAG head to fit both the magnetic only and magnetic with wireless charging.  Please check here for more info on the Quadlock Mag system.
https://www.quadlockcase.com/collections/mag

It is a “Print in Place” design, printed flat and rotates on an internal hinge to 30 degrees from vertical for optimal viewing.  The Mag head mounts to the stand (5mm bolt included with the QL head) and has a channel up the middle to run a USB cable into the head.

Smaller print beds will require this to be printed at a 45-degree angle (for beds that are approx. 200x200).

For those that don’t use a Quadlock phone case, I have uploaded adapters for iPhone Magsafe and Snapmount users.
Apple Magsafe Adapter:
https://than.gs/m/858198
Snapmount Adapter:
https://than.gs/m/858228

Phone

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Portable Mobile Stand

Apple Magsafe Adapter.3mf

Nova Nesting Trio: Minimalist Desk Organizer Set

Bathroom Cell Phone Magazine Stand

Phone Hanger

Doraemon Playground Pipes

2013 F150 Phone Holder

Yet another phone stand

Miniature Smartphone Earrings

Super Simple Phone Holder 📱

Heart Phone Stand

Hex Phone Holder

Elegant Phone holder For Iphone 7

Cactus Vase - Cactus Series

Print in Place Quadlock Mag Phone Stand - Hearts

Phone Lanyard – Modular 3D-Printed Accessory

Generic Phone Shower Hangar

Frame Phone Holder

Desk organizer.stl

Lego Hand MagSafe Charging Dock