Multiboard | Crimper | Plier | Pegboard

Peg Crimper 55x25.stl

Multiboard | Measuring Tape | Circular Cup | Pegboard

Peg Mesuring Tape.stl

Sewing Thread Spool Rack 

5 Prong Rack.stl

3 inch Circular Sanding Holder with Pegboard Mount

3 inch Circular Sanding Holder with Pegboard Mount.stl

Citadel Paint Pegboard Mount x6

Citadel Pegboard 6.obj

PegBoard Holster Display Mount

PegBoard Holster Holder_V3 open on left side_gcode-File.3mf

Keyhole_Attachment_system_Button_V6.3mf

Keyhole_Attachment_system_Base_V4.3mf

3x3 headphone holder pegboard

3x3 headphone holder.stl

Bolt & Nut Adapter for Ikea Skadis Pegboards

skadis-bolt-adapter-M4.stl

Baofeng UV-5R Ikea peg board mount

Radio Peg Board Holder v8.stl

PegBoard Gridfinity Refined 4x2.stl

Medium pegboard bin

Sticker Bin big.stl

EZPZ Pegboard Hook // 20mm Hook Type B

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 20mm depth and a shallow angle. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

EZPZ Pegboard Hook // 10mm Hook Type B

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 10mm depth and a shallow angle. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

EZPZ Pegboard Hook // 25mm Reinforced Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 25mm depth and a reinforcing strut along the bottom, which takes up a bit more space in exchange for greater strength. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Fidj Puzzle // Peg Anything X Mount

x-fidj-a.stl

Wacom Pen Holder // Peg Anything

The pegboard life is grand... everything you need, organized and within arms reach! This print holds your Wacom Intuos Pen Holder.

Made for standard pegboards with 1/4" holes spaced 1" apart

peg-wacompen-1.stl

Scotch Tape Holder // Peg Anything

A perfect fit for those little plastic scotch tape dispensers. Don't let it clutter up your desk, throw it on a pegboard!

This one does require supports!

HTC Vive Controller + Headset Holders // Peg Anything

peg-vivecontroller-beefy.stl

Modular Air Tool Organizer

HolderBaseLabel.stl

Pegboard

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Multiboard | Crimper | Plier | Pegboard

Multiboard | Measuring Tape | Circular Cup | Pegboard

Sewing Thread Spool Rack

3 inch Circular Sanding Holder with Pegboard Mount

Citadel Paint Pegboard Mount x6

PegBoard Holster Display Mount

Keyhole_Attachment_system_Button_V6.3mf

3x3 headphone holder pegboard

View 10 new models

Baofeng UV-5R Ikea peg board mount

PegBoard Gridfinity Refined 4x2.stl

Medium pegboard bin

EZPZ Pegboard Hook // 20mm Hook Type B

EZPZ Pegboard Hook // 10mm Hook Type B

View 17 new models

View 16 new models

View 78 new models

View 18 new models

View 21 new models

Modular Air Tool Organizer