Articulated Unicorn Dragon Keychain Print-in-Place

Unicorn Keychain Mesh Mayhem.stl

Flying Owl: Adjustable Book Nook

3MF-Flying-Owl-Adjustable-Book-Nook-KrakDrag_colored_type_1.3mf

Fold-a-Ball - A foldable ball that fits in your pocket

Folding Ball HD 1v00a.stl

Long Bony Basilisk - Articulated Snap-Flex Fidget (Medium Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Emerging from the crypts and cursed castles, the Bony Basilisk is here to bewitch and bedazzle just in time for the spooky season! With its detailed skeletal structure, this bony behemoth is prepared to perch on your shelf as the haunting highlight of your Halloween assembly or stand sentinel, casting a bone-chilling shadow for your guests.  This ancient creature refuses to let the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the Bony Basilisk to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

This Bony Basilisk is the third creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Medium** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Long Bony Basilisk:**
https://than.gs/m/936921
**Loose Tolerance Long Bony Basilisk:**
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Long Bony Basilisk, be sure to check out it’s cute younger sibling, the Short Bony Basilisk:

**Tight Tolerance Short Bony Basilisk:**
https://than.gs/m/936954
**Medium Tolerance Short Bony Basilisk:**
https://than.gs/m/937047
**Loose Tolerance Short Bony Basilisk:**
https://than.gs/m/937048

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Print-In-Place Snowball Mold

snowball_mold_sphere.stl

Ruinclaw Articulated Dragon

Ruinclaw Articulated Dragon.stl

Lazy Moose

Lazy Moose_v1.1.stl

SKEWBITS v2.0 Puzzle Game // Full Set w. Problems 001-050

bit_A_red.stl

Flexi Baby Elephant with Hats Print In Place/ 3MF Included / No Supports

Flexi Elephant Regular (Multicolor).stl

M3D - Flexi Baby Narwhal

M3D-BabyNarwhal.stl

Baby Caterpillar

M3D-BabyCaterpillar (1).stl

M3D - Flexi Axolotopus

M3D-Axolotopus (1).stl

M3D - Flexi Baby Pig

M3D-BabyPig_v1.stl

M3D - Flexi Baby Chameleon

M3D-BabyChameleon.stl

Baby Basilisk (Extra Long) - Articulated Snap-Flex Fidget (Loose Joints)

BabyBasilisk_V2_ExtraLong_Loose.stl

M3D - Flexi Baby Duck

M3D-BabyDuck (1).stl

Planetary Quick Container

**Planetary Quick Container**

When you hold the middle section on this container and turn the bottom section, it opens up quickly due to the planetary gears on the bottom.

**How it works**
The bottom outside is the ring gear, the outer top part is the carrier, and the inner part is the sun gear.  Rotating the bottom segment while holding the top segment results in the planetary gears rotating inner shell at a 3:1 ratio.  

**Print instructions**
It’s designed for a .4mm nozzle, .2mm layer heights, no supports at 100% but there is some bridging.  There is a 6mm hex hole in the sun gear to free up the gears if necessary.

**Remove the brims** 
There are four built in brims attached to the sun gear that will need to be removed.

Printed on the [Muldex]( https://github.com/3dprintingworld/Mulcore) Core-XY 3D Printer. 
___
**Support and Licensing**
If you would like to help support more free models, or get permission to sell physical copies of my models, consider joining my [Patreon]( https://www.patreon.com/3dprintingworld)


PRINT-IN-PLACE

Most Popular Paid of All Time

Categories

Paid

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Articulated Unicorn Dragon Keychain Print-in-Place

Flying Owl: Adjustable Book Nook

Fold-a-Ball - A foldable ball that fits in your pocket

Long Bony Basilisk - Articulated Snap-Flex Fidget (Medium Joints)

Print-In-Place Snowball Mold

Ruinclaw Articulated Dragon

Lazy Moose

SKEWBITS v2.0 Puzzle Game // Full Set w. Problems 001-050

Flexi Baby Elephant with Hats Print In Place/ 3MF Included / No Supports

M3D - Flexi Baby Narwhal

Baby Caterpillar

M3D - Flexi Axolotopus

M3D - Flexi Baby Pig

M3D - Flexi Baby Chameleon

Baby Basilisk (Extra Long) - Articulated Snap-Flex Fidget (Loose Joints)

M3D - Flexi Baby Duck

Planetary Quick Container

SKEP | Pendant Light E27 fast print

Nerfslinger X-Bow || Print-in-Place

M3D - Flexi Baby Hedgehog (revised)