Print of STG-02M Machairodus and STG-03 Scimitar Tooth from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts will also be labeled with "R" or "L" in their filenames. The model is designed to be color separated. Files are organized in their own folders based on what color filament they are to be printed in. File set is also separated for the different color palettes between the Machairodus and Scimitar Tooth builds with instructions included. Height of assembled model is approximately 4.00" (101mm) tall at the top of the head.

Machairodus and Scimitar Tooth

Scimitar_Tooth_Yellow.3mf

Print of STG-01 Exor from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts will also be labeled with "R" or "L" in their filenames. The model is designed to be color separated. Files are organized in their own folders based on what color filament they are to be printed in. Height of assembled model is approximately 4.0" (101mm) tall at the top of the head.

Exor

Exor_Beige.3mf

Print of STG-00 Sumilidon from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts will also be labeled with "R" or "L" in their filenames. The model is designed to be color separated. Files are organized in their own folders based on what color filament they are to be printed in. Height of assembled model is approximately 4.0" (101mm) tall at the top of the head and and 4.5" (114mm) at the top head ornaments.

Sumilidon

Sumilidon_Beige.3mf

Print of KLN-02M Maasai Moran and KLN-03 Maasai Laibon from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts will also be labeled with "R" or "L" in their filenames. The model is designed to be color separated. Files are organized in their own folders based on what color filament they are to be printed in. File set is also separated for the different color palettes between the Moran and Laibon builds with instructions included. Height of assembled model is approximately 4.00" (101mm) tall at the top of the head.

Maasai Moran and Maasai Laibon

Maasai_Laibon_Leg_Waist_Brown.stl

Print of KLN-00 Warbandit from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts will also be labeled with "R" or "L" in their filenames. "Head_Cylinder", "Barrel" and "Arm_Rivets" parts will need to be printed 2 times, and Toe and Leg Rivets 6 times. The model is designed to be color separated. Files are organized in their own folders based on what color filament they are to be printed in. Height of assembled model is approximately 4.0" (101mm) tall at the top of the head and and 5" (127mm) at the top head ornaments.



Warbandit

Warbandit-Leg_Shin_Brown.stl

Print of MSM-04 Acguy from Mobile Suit Gundam Thunderbolt in roughly 1/144 scale. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts will also be labeled with "R" or "L" in their filenames. The holes in the knee and elbow joints and the "slots" for the hands should be reamed with a 4mm drill bit to ensure proper fit for the pins that are inserted through them during assembly.

Acguy Thunderbolt Version

Acguy_TB-Torso_Mid_Strip_Beige.stl

Print of KWG-03 Mach Massive from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts will also be labeled with "R" or "L" in their filenames. Horns will need to be printed 2 times, and Hammer Pins 3 times. The model is designed to be color separated. Files are organized in their own folders based on what color filament they are to be printed in. Height of assembled model is approximately 4.25" (108mm) tall at the top of the head and and 5" (127mm) at the top of the horns.

Mach Massive

Mach_Massive-Head_White.stl

Print of KWG-01 Rokusho from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. The "collar" part on the lower arms will need t be reversed when assembling left and right arms. None symmetrical parts will also be labeled with "R" or "L" in their filenames. Horns will need to be printed 2 times, Hammer Pins 3 times and Knee Rivets 4 times. The model is designed to be color separated. Files are organized in their own folders based on what color filament they are to be printed in. Height of assembled model is approximately 4.25" (108mm) tall at the top of the head and and 5" (127mm) at the top of the horns.

Rokusho

Rokusho-Head_Main_White.stl

Print of KBT-03 Kantaros from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts are labeled with "R" or "L" in their filenames. Leg "Plug" part will need to be printed 10 times and go into the circular slots along the shins and waist. Arm "Barrel" and "Back Barrel" parts need to be printed 3 times, one for the right arm and 2 for the left arm. The model is designed to be color separated. Files are organized in their own folders based on what color filament they are to be printed in. Height of assembled model is approximately 4" (100mm) tall at the top of the head and and 4.5" (120mm) at the top of the horns.

Kantaros

Kantaros-Head_Main_Yellow.stl

Print of KBT-02 Bayonet from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts are labeled with "R" or "L" in their filenames. The model is designed to be color separated. Files are organized in their own folders based on what color filament they are to be printed in. Height of assembled model is approximately 4.25" (108mm) tall at the top of the head and and 5.5" (140mm) at the top of the horns.

Bayonet

Bayonet-Head_Main_Black.stl

Print of KBT-01 Metabee from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts are labeled with "R" or "L" in their filenames. The model is designed to be color separated. Files are organized in zip file based on what color filament they are to be printed in. Height of assembled model is approximately 4" (100mm) tall at the top of the head and and 5" (127mm) at the top of the horns.

Metabee

Metabee-Arm_Lower_Yellow.stl

Metabee-Head_Yellow.stl

**Don't forget to ❤️, add to a collection, and follow SUNA for more fun creations!**
___
This is probably not the first clean/dirty dishwasher magnet you've seen, but ~it is the coolest~ this one doesn't contain death crystals! A simple, easy way to keep track of your dishwasher - as long as you remember to flip the sign you will no longer have to guess & inspect dishes to figure out if it was run. There is also a blank sign for you to add your own text! Check the attached YT video to see a quick tutorial on adding negative modifiers like text to a model!

**Dimensions**:  100 x 60 x 4 mm (~3.9 x 2.4 x .16 in)

**Weight**: ~19g + 1g waste

**Additional Items**: You will need 2x Magnets, sized ~20x5x2. You can find them [here on amazon](https://www.amazon.com/gp/product/B07Q6564FB/).
Note that tolerances are loose on these magnets so if one does not fit well just try another from the set. You may also try a little glue if you have any issue with them coming loose. 

___
**PRINTING**:
- Clean your build plate! "Flat" models like this are more likely to shrink and peel up. 
- Print from either side. I prefer design face down on a nice textured plate like the cryo plate
- Print with at least 5 bottom & top shell layers, 2-3 walls, 0-20% infill
- 3mf included with all three designs and a layer change added at z=1.2mm (layer 6 for .2mm layers)

___
‼️ All models are the exclusive intellectual property of SUNA. SUNA models are protected under applicable copyright laws and international treaties. Unauthorized sharing, distribution, reproduction, or sale of these models in any form is strictly prohibited.

Users are granted limited rights to download and use models for personal, non-commercial purposes only. Any commercial use of these models, including but not limited to selling, modifying for sale, or redistribution, is strictly forbidden unless the user subscribes to a valid Thangs license with Commercial Rights.

Magnetic Dishwasher Sign - CLEAN | DIRTY

display_magnetic_clean_dirty_curlytext.stl

display_magnetic_full_set.3mf

Elevate your workspace with _The Dock_ ~ a charming MagSafe solution. Crafted with precision, _The Dock_ ensures your iPhone is always within reach, enhancing both the aesthetics and efficiency of your desk.

**Design:**
- Fit Compatibility: Fits official Apple MagSafe Charger
- Wire Management: Hide your wires through the integrated wiring management route
- Adjustability: Ball mount design allows for adjustable angles and orientation
- iPhone Compatibility: iPhone 12, iPhone 13, iPhone 14, & iPhone 15

**Build Specifications:**
- Material Compatibility: Ideal for PLA, PETG, ABS, Nylon, etc.
- Resolution: 0.12 mm (for smoothest finish) or 0.2 mm 
- Infill: 20%
- Supports: Yes (just for the Riser)
- Rafts: Not need
- Assembly: Apply a thin layer of super glue to combine the Base & Riser. Twist-lock the Riser ball into Mount

The Dock is easy to print, ensuring a seamless assembly process from start to finish.


PETG

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Machairodus and Scimitar Tooth

Exor

Sumilidon

Maasai Moran and Maasai Laibon

Warbandit

Acguy Thunderbolt Version

Mach Massive

Rokusho

Kantaros

Bayonet

Metabee

Magnetic Dishwasher Sign - CLEAN | DIRTY

The Dock ~ Phone Stand