13 mm Big Thread, Push-fit Head, Folded-Bolt

13 mm Big Thread, Push-fit Head, Folded-Bolt.stl

Heat Set Insert - Push-Fit - M2·5 Standard

Heat Set Insert - Push-Fit - M2.5.stl

13x13 Multiboard Side Legacy Tile

13x13 Multiboard Side Tile.stl

Modular Midcentury Drawer Organizer System: A Retro, Customizable Storage Solution

pixelandpapier_midcentury_organizer_drawer.stl

13 mm Big Thread, Push-Fit Head, Small Thread Hole, Shank Bolt

13 mm Big Thread, Push-Fit Head, Small Thread Hole, Shank Bolt.stl

Log Organizer!!!

Tree Organizer(smallerFile).3mf

Remix of 8 mm, Cross Quad Offset Snap - DS Part A

8 mm Cross Quad Offset Snap Combined.stl

Drop-In Nut - Weight Bearing Snap - M6

Drop-In Nut - Weight Bearing Snap - M6.stl

Drop-In Nut Snap - M6

Drop-In Nut Snap - M6.stl

Heat Set Insert - Weight Bearing Snap - M5 Short

Heat Set Insert - Weight Bearing Snap - M5 Short.stl

15x15 Multiboard Side Legacy Tile

15x15 Multiboard Side Tile.stl

18 mm Mid Thread, Push-fit Head, Small Thread Hole, Folded-Bolt

18 mm Mid Thread, Push-fit Head, Small Thread Hole, Folded-Bolt.stl

Heat Set Insert - Weight Bearing Snap - M8 Standard

Heat Set Insert - Weight Bearing Snap - M8 Standard.stl

Push Fit Nuts for Multiboard

Small Thread Push Fit Adapter-9mm.stl

Heat Set Insert - Weight Bearing Snap - M2 Standard

Heat Set Insert - Weight Bearing Snap - M2 Standard.stl

Heat Set Insert - Weight Bearing Snap - M6 Standard

Heat Set Insert - Weight Bearing Snap - M6 Standard.stl

10 mm Mid Thread, Flat Head, Small Thread Hole, Folded-Bolt

10 mm Mid Thread, Flat Head, Small Thread Hole, Folded-Bolt.stl

Heat Set Insert Snap - M5 Standard

Heat-Set Insert Snap - M5 Standard.stl

Big Threads - STL Multiboard Remixing Files

100mm - Large Hole (Negative).stl

 Minimalist Tape Dispenser (desk organizer) 

A simple, minimalist tape dispenser designed for general-purpose double-sided and regular painting/plastic tapes. 

Just orient the object flat on its back and start printing (without supports). 

I recommend printing the object with the variable layer height setting enabled in PrusaSlicer to ensure the teeth are sharp. In some cases, it also helps to insert the tape with the sticky side up for easier dispensing.

Size: 6.7 x 6.7 x 3 cm
Print time: 3 - 4 hours 

Settings:

Layer height: 0.25 mm (with adaptive variable layer height enabled @ 100% quality)
Perimeters: 2 - 3 
Infill: 10%
Top and bottom layers: 5

This is a fun/ experimental design. 
Any tips for improvement or feedback would be appreciated :)

Happy printing! 

Organizers

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

13 mm Big Thread, Push-fit Head, Folded-Bolt

Heat Set Insert - Push-Fit - M2·5 Standard

13x13 Multiboard Side Legacy Tile

Modular Midcentury Drawer Organizer System: A Retro, Customizable Storage Solution

13 mm Big Thread, Push-Fit Head, Small Thread Hole, Shank Bolt

Log Organizer!!!

Remix of 8 mm, Cross Quad Offset Snap - DS Part A

Drop-In Nut - Weight Bearing Snap - M6

Drop-In Nut Snap - M6

Heat Set Insert - Weight Bearing Snap - M5 Short

15x15 Multiboard Side Legacy Tile

18 mm Mid Thread, Push-fit Head, Small Thread Hole, Folded-Bolt

Heat Set Insert - Weight Bearing Snap - M8 Standard

Push Fit Nuts for Multiboard

Heat Set Insert - Weight Bearing Snap - M2 Standard

Heat Set Insert - Weight Bearing Snap - M6 Standard

10 mm Mid Thread, Flat Head, Small Thread Hole, Folded-Bolt

Heat Set Insert Snap - M5 Standard

Big Threads - STL Multiboard Remixing Files

Minimalist Tape Dispenser (desk organizer)