Planet Lamps

Earth.stl

Neptune Lithopanes

Hey,
these are Comet Vesta Lithopanes for you to remix.
There are different sizes 75 mm, 100 mm, 125 mm, 150 mm, 175 mm, 200 mm, 225, mm and 250 mm on there.
It's designed for an FDM printer with a 0.4 mm nozzle. You may be able to print this with bigger nozzles, if you use the layer height and width I recommend.
Print settings:
Domes are quite hard to print. I never printed this as a whole, I always cut it into pieces first.
Layer Height 0.2 mm
Layer Width 0.4 mm
No supports.
I always decrease the speed at the top of the dome (when the bridging occurs) to 50%. You can do this in Cura using the extension post-processing.
I use standard white PLA for these. If you are unsure if your filament works, just shine through the walls of the print with your phone lamp at something like 10% print completion. You should see the Lithophane effect.

Remember to add me when you remix this, I'm eager to see what you do with this. I made some ready to print lamps with this, you can check them out at my site.

If you used this, please consider buying me a coffee at https://www.buymeacoffee.com/Ri0m0

Hybrid Hanging/Desk Neptune Lamp

Introducing the mesmerizing Hybrid Neptune Lamp. With its versatile design, you have the option to either screw the legs out and hang it from the ceiling or use the convenient leg holder to keep them safe when not in use.

To bring the Hybrid Neptune Lamp to life, you'll need a lamp socket and a bulb. For an enchanting display, I recommend using a Multi-color LED bulb. Depending on your location, you can find suitable options through the following links:

EU Plug:
https://ebay.us/PRcPvm

US Plug:
https://ebay.us/hBRN1i

You support me by suing these Links! :D

Enhance the ambiance with the perfect bulb:

EU:
https://ebay.us/yB4Acp

US:
https://ebay.us/oTWuS1

You support me by suing these Links! :D

Print Settings:
To create this, you only need to print the numbered files. The additional files are included in case you require separate prints. When printing the Pluto model, use a 0.4 mm nozzle or set a line height of 0.2 mm and a width of 0.4 mm. The domes can be challenging to print, but I recommend slowing down the layers at the top to 50% print speed (around layer 670). Achieve optimal strength by using 100% infill with concentric infill, or you can set your wall count to a higher value, such as 40. Basic white PLA works perfectly; I used Sunlu White PLA+ for my model. Avoid matte or glitter filaments as they may not produce the desired effect. No supports are required for printing.

For the legs and plate, no supports are needed. For a visually appealing result, try positioning the seam on the inside of the legs. Feel free to choose any color that suits your taste.

Enjoy the captivating beauty of your completed Hybrid Neptune Lamp! If you find joy in this creation, please consider supporting my work by buying me a coffee at https://www.buymeacoffee.com/Ri0m0. Every contribution helps me continue my filament-fueled endeavors.

Check out my profile for more incredible lamp designs or stay tuned for upcoming releases. Here are some other mesmerizing hybrid lamps you might like:

Mercury: https://www.thingiverse.com/thing:6062935
Pluto: https://www.thingiverse.com/thing:6058417
Sun: https://www.thingiverse.com/thing:6036612
Mars : https://www.thingiverse.com/thing:6036600
Jupiter: https://www.thingiverse.com/thing:6036586
Football: https://www.thingiverse.com/thing:6036569
Asteroid Vesta: https://www.thingiverse.com/thing:6036559
Basketball: https://www.thingiverse.com/thing:6036547
Venus: https://www.thingiverse.com/thing:6034731
Moon: https://www.thingiverse.com/thing:6034515

Each lamp combines the beauty of space with stunning design. Explore the universe of possibilities!

Please note that this design is provided under a non-commercial license.

#FunctionalArt

Neptune Desk Lamp

Greetings!

I'm excited to present you with my Neptune Desk Lamp. This unique piece is sure to add a celestial glow to your workspace.

Here's what you'll need to assemble this lamp: a lamp socket and a bulb. I personally prefer a multicolored LED bulb, but the choice is yours. Please note, i designed this lamp specifically for this lamp socked ton ebay. You can make your own version, it just involves more effort because the parts might not fit.

EU Version:

EU Plug: https://ebay.us/ASMco5

EU Bulb: https://ebay.us/yB4Acp

US Version:

US Plug: https://ebay.us/yHsc2c

US Bulb: https://ebay.us/oTWuS1

Support my work by purchasing through these links!

On to the print settings:
For this project, you only need to print the files which are numerically labelled.

Neptune: Opt for a 0.4 mm nozzle. Alternatively, set your print to a line height of 0.2 mm and a width of 0.4 mm. Be aware that the domes can be challenging to print. I recommend reducing the print speed to 50% when you reach layer 670. Use 100% infill with concentric infill, or adjust your wall count to a high figure, such as 40. For material, any basic white PLA should suffice. I've found that Sunlu White PLA+ gives great results. Please steer clear of matte or glitter materials as they won't produce the desired effect. The good news is, you won't need any supports!

Holder: Unlike the Neptune part, you'll need to print the holder with supports.

Voila! Your neptune Desk Lamp is ready to brighten up your space. If you've enjoyed creating this lamp, please consider supporting my filament needs by buying me a coffee at https://www.buymeacoffee.com/Ri0m0. As a student, every bit of support helps!

In addition to this, you'll find more lamp designs on my profile, and there are more on the way! Feel free to reach out if you encounter any difficulties or if you have any suggestions.

Please keep in mind that this design is intended for non-commercial use only.

Enjoy lighting up your workspace with your very own Milky Way Desk Lamp!
#FunctionalArt

Neptune 3 Pro/Plus/Max Z Axis Camera Mount

I was looking for a way to get my Raspberry Pi camera connected to the Z Axis to my Neptune 3 Plus. I have been working for a while to get this looking just right. I think that I stuck gold and am I am finally ready to share it to the world. I hope that others find some use in this as well!

I used (2) M4x12 screws and nuts to attach it to the frame. It is not impeding any movement in any direction.

Neptune Plus Chain Bed and Link System

HeatbedChain - Links v1.3mf

Glowing Solar System // 8 Planets + Moon Glow Filament Decals

Jupiter_Glow.stl

Clip On Neptune Tool Holder

toolholder.3mf

p2v neptune.stl

PTFE Tube Holder for External Dry Boxes - Elegoo Neptune 3 Pro

PTFE Tube Holder - Body.stl

Neptune TBStron3D Linear Rail Chain Adapter and Run Out Sensor Relocation

RailMount v7.3mf

Neptune Touchscreen and pi4 Case 

Neptune Touchscreen Case - Body v1.stl

Elegoo Neptune 4 Tensioner Knob

Elegoo N4 Tensioner Knob v3.stl

Elegoo Neptune 3 Pro/Plus/Max heated bed wire holder (Remix)

elegoo_wire_holder.stl

solar system wall art space wall decor

solar system.stl

Neptune 3 Plus Faceplate / Frontend

NeptuneFacelate - Center  v4.3mf

Ring light led Holder for 2020 frame  Ender 3, Ender 3 v2, Neptune 2, Neptune 2s.

Ring light led Holder for 2020 frame (Ender 3, Ender 3 v2, Neptune 2, Neptune 2s... ) Segurador de Ring light para Ender 3, neptune2s etc.


NEPTUNE

Trending this Week

Categories

Trending

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Planet Lamps

Neptune Lithopanes

Hybrid Hanging/Desk Neptune Lamp

Neptune Desk Lamp

Neptune 3 Pro/Plus/Max Z Axis Camera Mount

Neptune Plus Chain Bed and Link System

Glowing Solar System // 8 Planets + Moon Glow Filament Decals

Clip On Neptune Tool Holder

p2v neptune.stl

PTFE Tube Holder for External Dry Boxes - Elegoo Neptune 3 Pro

Neptune TBStron3D Linear Rail Chain Adapter and Run Out Sensor Relocation

Neptune Touchscreen and pi4 Case

Elegoo Neptune 4 Tensioner Knob

Elegoo Neptune 3 Pro/Plus/Max heated bed wire holder (Remix)

solar system wall art space wall decor

Neptune 3 Plus Faceplate / Frontend

Ring light led Holder for 2020 frame Ender 3, Ender 3 v2, Neptune 2, Neptune 2s.

Solar System Display

BigTreeTech Octopus v1.1 Mount for Neptune 3 Plus

Space Ornaments