Quackers Duck Call 

Quackers_SparkyFace5.3mf

Music Note Coaster (Coaster for Drinks) Bundle

Music Note, 3D Object, Mihovec Design.stl

Singing Bird whistle 

Bird Call Water Whistle_01_SparkyFace5.3mf

Taylor Swift Hueforge Portrait

TaylorSwift_Hueforge_111x178.stl

SKELETON HAND HORNS ROCK AND ROLL

skeleton_hand horns.stl

Guitar on Fire - HueForge Print - Frame Compatible

guitaronFire_Front_150x210.stl

Dr DRE Chronic 2001

Dr DRE .stl

Violinists - Lady of Pox - PRESUPPORTED - Illustrated and Stats - 32mm scale			

violin 3 - normal.stl

Alpine Musicsafe case

Case for Alpine Musicsafe earplugs. These earplugs have a relatively flat frequency response and come with multiple (mine had three) filters for different noise levels. The flat attenuation means you can enjoy music much more than standard safety earplugs. My tip is: put them in before the band starts or you'll spend the gig remembering how good it sounded at first.

The earplugs themselves come with a little tube case that's a bit of a pain. The rubbery wings of the earplugs get stuck in there, along with the extraction tool for getting them back out of your ears. You don't want to be dicking around at risk of dropping them on a crowded, dark dancefloor at a gig.

Magnets embedded in the case hold it together and alignment pins make it close properly. It's compact and sturdy, probably a more convenient shape to shove in your jeans watch pocket than the original.


Hardware needed

    2x 8x5x2mm rectangular magnets
    4x 6x2mm cylindrical magnets

Printing

I printed in PETG because it's light and durable. Set up your print to pause when it reaches the layer just before it covers the holes. You'll need two pauses for the two sets of magnets. Ctrl-click on layers in PrusaSlicer.

More info: https://github.com/shermozle/alpine_musicsafe_case/

Record Store

recordStoreWhole.stl

Taylor Swift 1989 Cardigan - Hueforge Print

1989CardiganNoBorder_Front_200x200.3mf

Taylor Swift Midnights Coaster

TaylorMidnights.3mf

1/4 Quater inch jack holder collection

Holder for 10 1/4" headphone jack accessories.

1/4 Quater inch jack holder 10

Jack Skellington Band Poster

A quirky little Halloween print of Jack Skellington as if he's in a pop-punk band. You can replace the green with any colour you think fits, and the Teal with any light colour (grey, beige etc). Have fun! 

 

As with other Hueforge models, an AMS or an MMU is not necessary. All you have to do is set pauses where the filament swaps are being done, and then load the new filament in before resuming the print. 

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

 

**Filaments Used:**
- PLA Kingroon Black Transmission Distance: 0.4
- PLA BambuLab Basic BambuLab Green Transmission Distance: 8
- PLA META Sunlu Teal Transmission Distance: 5.4
- PLA Kingroon White Transmission Distance: 8

 
**Swap Instructions:**
- Start with Black
- At layer #10 (0.96mm) swap to BambuLab Green
- At layer #17 (1.52mm) swap to Teal
- At layer #23 (2mm) swap to White for the rest.

bandskellington_Front_160x213.3mf

Page Turner from 4 key pc keyboard USB

4Key-StepPedal-4Printing.stl

OP-1 BestCase Decksaver and Stand // Wide Awake [Red Eye Series] 

Protect your OP-1 in the coolest way possible with a _decked out cases!_ The OP-1 BestCase is both a deck protector and a stand that tilts the OP-1 up to take advantage of the same ergonomic benefits that computer keyboards have been rocking since the 80's.

This design comes from my Red Eye Series, which consists of 3 original art pieces inspired by sleepless nights spent searching for inner peace while making tunes.

---

To get the 2 color graphics, swap filament at 0.4mm layer height. This can be achieved with pause at layer height plugins for Cura, Octoprint, etc, or by slicing two separate models, one that stops at 0.4mm and the next starting at 0.4mm. Some printers have a built in pause at layer height feature.

The model includes round tabs at each corner to improve build plate adhesion. They can be ripped off afterward, or cleanly removed with a X-acto knife.

As you're likely aware, PLA is not sun-friendly, so avoid exposing a PLA case to warm environments to prevent warping. If you want extra security, I recommend silicone bands like these [Grifiti Bands](https://amzn.to/2Vs8Cn7) (also on [eBay](https://ebay.us/WTUA4B)) or [these](https://amzn.to/2KlG1JT).

 

Replacement Microphone Holder

If your mic holder snaps like mine did hopefully this print can save the day. The connecting hinge is 5.8mm wide with a 7.2mm hole. I used my heat gun to better form the clip to my microphone, [as shown in this video](https://youtu.be/bxhblZbzzjM).

 

I printed at 0.15mm layer height with 7 shell thickness for a strong print that should last a long time.

folklore by Taylor Swift - Hueforge Print

OP-1 BestCase // Simple Decksaver

Protect your OP-1 in the coolest way possible with a 3D printed case! Better yet, the OP-1 BestCase is both a deck protector and a stand that tilts the OP-1 up to take advantage of the same ergonomic benefits that computer keyboards have been rocking since the 80's.

The model includes round tabs at each corner to improve build plate adhesion. They can be ripped off afterward, or cleanly removed with a X-acto knife.

This case uses a friction fit designed for PLA, so materials that shrink more like ABS may be too tight.

As you're likely aware, PLA is not sun-friendly, so avoid exposing a PLA case to warm environments to prevent warping. If you want extra security, I recommend silicone bands like these (also on eBay) or these.

 

MTV Logo

MTV-Logo.stl

Music

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Quackers Duck Call

Music Note Coaster (Coaster for Drinks) Bundle

Singing Bird whistle

Taylor Swift Hueforge Portrait

SKELETON HAND HORNS ROCK AND ROLL

Guitar on Fire - HueForge Print - Frame Compatible

Dr DRE Chronic 2001

View 38 new models

Alpine Musicsafe case

Record Store

Taylor Swift 1989 Cardigan - Hueforge Print

Taylor Swift Midnights Coaster

1/4 Quater inch jack holder collection

Jack Skellington Band Poster

Page Turner from 4 key pc keyboard USB

View 78 new models

View 18 new models

View 19 new models

View 20 new models

MTV Logo