EZPZ Pegboard Hook // 20mm Reinforced Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 20mm depth and a reinforcing strut along the bottom, which takes up a bit more space in exchange for greater strength. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Picture Frame Hanging Hook

picture_hook_2.stl

Tiny Keychain Loop

Keychain_Loop.stl

Doric Column // Display Stand

Large_Column_Mid_Straight.stl

PLEIADES Pen Stand [Pilot G-2]

Pilot G-2 Pen Holder 0.4 vase PLEIADES.stl

EZPZ Pegboard Hook // 15mm Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 15mm depth. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Xbox controller mount

controller stand laying down.stl

GEN2 Tilt Drawer Pro - 115

115-1w-2h-tilt-drawer-case.stl

Tough Little Hook // Peg Anything

I made stronger hooks that use two pegs to prevent rotation. At 100% infill these little suckers can hold a fair amount of weight!

Made for standard pegboard with 1/4" holes spaced 1" apart. Photographed model printed with [MatterHacker White PRO Series PLA](https://bit.ly/PRO-PLA)

Wall Mounted Smarthpone, Remote Holder,Cable entry

PH001.stl

Hero Me Documentation - Details.stl

Documentation Membership Details.stl

Gridfinity 2x1 Base Wall Mount

This is a wall mount for the gridfinity small parts storage system by** Zack Freedman **

This one holds two 1x1 storage bins or one 2x1 storage bin.

The holes for wall mounting are recessed to take pan head screws.
D.I.Y. TINKERER
[https://www.youtube.com/c/diytinkerer](https://www.youtube.com/c/diytinkerer)

Original concept by [Zack Freedman](https://www.youtube.com/c/zackfreedman)


EZPZ GPU Anti-Sag Column // NVIDIA 40-Series & Generic Versions

GPU Anti Sag Column Top.stl

Paper towel holder print-in-place

Papertowelholder_0.3_left.stl

EZPZ Pegboard Hook // 20mm Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 20mm depth. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

EZPZ Pegboard Hook // 25mm Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 25mm depth. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

EZPZ Pegboard Hook // 5mm Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 5mm depth. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Wall or Door Mounted Organizer Box

BOX002.stl

EZPZ Pegboard Hook // 10mm Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 10mm depth. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Power Strip Holder

Big Power Strip Mount Open Frikarte3D.stl

Mount

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

EZPZ Pegboard Hook // 20mm Reinforced Hook

Picture Frame Hanging Hook

Tiny Keychain Loop

Doric Column // Display Stand

PLEIADES Pen Stand [Pilot G-2]

EZPZ Pegboard Hook // 15mm Hook

Xbox controller mount

GEN2 Tilt Drawer Pro - 115

Tough Little Hook // Peg Anything

Wall Mounted Smarthpone, Remote Holder,Cable entry

Hero Me Documentation - Details.stl

Gridfinity 2x1 Base Wall Mount

EZPZ GPU Anti-Sag Column // NVIDIA 40-Series & Generic Versions

Paper towel holder print-in-place

EZPZ Pegboard Hook // 20mm Hook

EZPZ Pegboard Hook // 25mm Hook

EZPZ Pegboard Hook // 5mm Hook

Wall or Door Mounted Organizer Box

EZPZ Pegboard Hook // 10mm Hook

Power Strip Holder