---
📦Make sure to also check out the [Keychain Blaster Weapon Gift Crate](https://than.gs/m/1155174?affiliateCode=Jaatinen3D) — a nice storage and gift box that has an insert designed for this blaster!

---

&nbsp;

The infamous .50cal Barrett M82 _anti-materiel_ rifle is now a .236cal (6mm) keychain blaster, protecting your keys!

- Realistic back-front bolt action
- Detachable magazine that holds 7 BBs and feeds into the blaster
- Detachable barrel to make it more compact to carry (and to fit in the [Keychain Blaster Gift Crate](https://than.gs/m/1155174?affiliateCode=Jaatinen3D), check it out as well!)
- Comes with a magazine carrier for 3 magazines on the go, and a barrel carrier to carry the detachable barrel separately if the full rifle is too long for you 😅

&nbsp;

---

**Printing tips:**
All the parts are already in the optimal orientation for printing!

Use normal supports for _Frame Bottom_ and _Rear Sight_.
Use tree supports for _Frame Bottom_, _Stock_, _Nozzle_ and _Scope_.
I recommend using brim for stability for _Frame Bottom_, _Frame Top_, _Barrel_, _Scope_, _Stock_ and _Firing Pin_.

If you use Bambu Studio or OrcaSlicer, a handy print project file is included with the settings I used to print this!

&nbsp;

---

**Assembly:**
You'll need superglue and a small 5mm diameter spring 20-25mm long. See the included assembly video!

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

Barrett M82 Keychain — Functional Blaster Toy

Barrel Carrier.stl

Frame Bottom.stl

Stylish latched storage container inspired by the military ammo box! No glue or hardware required to assemble!

This model can be scaled up uniformly to a larger size if needed.

&nbsp;

---

**Printing tips:**
No AMS required to make this multicolor, all the different colored parts are separate!

The following parts require supports:
- _Box_ — Normal (snug) supports for the hinges and latch plate
- _Lid_ — Normal (snug) supports (NOT only on build plate) for the latch wire loop
- _Latch_ — Tree supports, on build plate only

If you use Bambu Studio or OrcaSlicer, a handy print project file is included with the settings I used to print this!

&nbsp;

---

**Assembly:**
See the included assembly video (above the promo pics)!

Ammo Box Container — Military Style Storage Box

Box.stl

Aliens(1986) is different from Alien(1979) in many ways. If Alien(1979) was a horror/thriller, Aliens(1986) is closer to an action movie. There are various equipment and vehicles that make this action fun, and the APC (M577 Armored Personnel Carrier) is the most active among them.
As an Alien fan, I really wanted to make this, and this time I made it.

I used a custom made support for the body part. It can be easily removed.
The rear cannon, which moves along the rail, must be attached to the rail before assembling the body.
In addition, the sliding door on the side must also be connected before assembling the body.

If there are any loose parts, please use glue to attach them.

Please refer to the video for detailed printing and making process.
Printing and assembling video - https://youtu.be/72ZsP_DlRdM?si=7LhbOkMfLi01cQ6-

1 : 48 scale
Largest part in printing, size = X 135mm, Y 175mm, Z 48mm, After full assembly size= X 70mm, Y 195mm, Z 60mm

Alien APC

GOODesign_Alien_APC_Body.stl

Cannon War Machine, this highly detailed cannon miniature is perfect for wargaming, tabletop battles, and building immersive dioramas. Its craftsmanship makes it an excellent addition to any fantasy or historical collection.

In the files, you will also find a PDF with the description and a catalog of completed miniatures from the "DnD Monster Series", crafted in our studio.

Cannon War Machine - with Free Monsters Series Pdf - Tabletop, RPG, Wargames, Dark Ages

Cannon_Body.stl

Cannon_Wheel.stl

Get commercial license and download newest models cheaply- https://www.patreon.com/goodesign
The foldable tank T-34-85 was quite popular. This time I learned that there are many fans of the T-34 tank in the world. There are several variations of the T-34 tank, and there was a request to build them.
So this time I made the T-34-76 a foldable tank.

The T-34-76 was built before the T-34-85 during World War II. And there is a slight difference between what was produced in 1942 and what was produced in 1943, this time with a version produced in 1942.

The big difference between the T-34-76 and the T-34-85 is the shape of the turret. The turret is very small and has a sleek shape. And the size of the barrel is smaller than the T34-85 equipped with a 76mm cannon and an 85mm cannon.
The shape of the wheel is also a little simpler. And there is no auxiliary fuel tank. Instead, it comes equipped with a spare tracks.

The overall design of the T34-76 is low and speedy. Complete the WWII Soviet tank collection with the T34-85.

https://youtu.be/ztahB9Hpl5I
https://youtu.be/BNwKgSqslDo
https://youtu.be/dmx6IEeQPZ4

Many 3D printer users are requesting that various tanks be designed in a foldable form. FAB365 will continuously manufacture military products according to the requests of 3D printer users. Please request a lot.

1 : 48 scale

When expanded, size = X 110mm, Y 139mm, Z 89mm After folding X 69mm, Y 138mm, Z 52mm

Foldable Tank T-34-76 1941

GOODesign_Foldable_Tank_T34-76_Hull.stl

It is the American Sherman tank that received many requests from people while designing the WWII tank series with a folding structure. The reason it was put off despite many requests is that the Sherman Tank's wheels and track structures are unique and complex. Moreover, the size of the Sherman tank itself was so small that it was very difficult to make this complex structure by folding. So we spent a lot of time designing. But I did it in the end!

The folding process is as follows:

1. Insert the front part of the tank body.
2. Put the side part on the top, and then the front part.
3. Raise the lower-rear part and rotate the protrusion to insert it into the front part.
4. Put the 6 wheels on the body.
5. Fit the front cog wheels and then the rear wheels.
6. Connect tracks to make two pairs.
7. Put the tracks around the wheel, then connect the start and end of the tracks.
8. Slide the cannon through the hole in the cannon part and then insert it into the turret.
9. Glue the two parts in front of the body.
10. This design may be difficult to print due to its small size and many sophisticated parts. Therefore, it is strongly recommended to print large.

If the wheel suspension is loose, attach it with adhesive. When using glue, be careful not to stick to the wheels.

Track rolls better and better with a lot of movement.

https://youtu.be/6ovzANifT38
https://youtu.be/ENdpJa8oCBQ

1 : 48 scale

When expanded, size = X 166mm, Y 152mm, Z 79mm After folding X 60mm, Y 123mm, Z 60mm



Foldable tank sherman

GOODesign_Foldable_Tank_M4-Sherman_Hull.stl

Get commercial license and download newest models cheaply- https://www.patreon.com/goodesign
The popularity of the foldable tiger tank late production was great. And there were many requests to produce early production as well. In response to these customer demands, this time, Foldable Tiger tank early production was designed.

Early production differs from Late production as follows.
1. First of all, the turret is a bit simpler, and there are no extra tracks. Instead, there are smoke-making devices.
2. An air filter is installed on the back of the body.
3. Lighting is installed in front of the body.
4. The wheels have a simpler shape.
5. Other details have different shapes.

The process of folding this tank is the same as the late production we made earlier, and is as follows.

Fold the front part first. Since the living hinge is used, fold it carefully and slowly so as not to break it.
Insert the side part with wheels on the front part and the top part. Check and fit each protrusion and hole.
Insert the rest of the side part. The body has been completed.
Connect the two tracks / caterpillars first.
Wind the track / caterpillar around the wheel. There is a change in shape, and the non-simple side is the outside of the track / caterpillar.
Fit the start and end parts of the track / caterpillar.
Put the cannon on the turret.
Glue the small parts on the back.
※ If the track is loose, try the following method.
1. If you increase the material flow in all slicers, more material will be discharged and the volume of the part will increase. This effect reduces the gap between the parts so that the tracks do not come loose or fall out.
2. And in case of using additional Cura, use Outer wall inset or Skin overlap percentage option.

https://youtu.be/kddCizsnZGw
https://youtu.be/LYcwto1NEAM
https://youtu.be/X8jNZoXv8bM

Print out this Foldable Tiger tank early production to complete your Tiger tank collection!

1 : 48 scale
When expanded, size = X 134mm, Y 178mm, Z 112mm After folding X 82mm, Y 185mm, Z 62mm

Foldable Tank TIGER-I early production

GOODesign_Foldable_Tank_Tiger-I_Early-Production_Hull.stl

Get commercial license and download newest models cheaply- https://www.patreon.com/goodesign
With the request and high vote from FAB365.net's request page, this time, I created a Russian folding T34-85 tank that was renowned in World War II.

This tank was the main Russian tank of the time when Germany created the Tiger tank to fight against it during World War II.

When designing this, I planned to use the structure of the folding Tiger tank I made earlier. However, since the T34-85 tank is smaller in size than the previously created Tiger tank, the structure of the folding Tiger tank cannot be used and the new structure is applied. (It always seems like that.)

The structure of two wheels on one wheel axle was also difficult to fit in a small size. Making the caterpillar to engage the wheels of the rear wheel structure was to create a new caterpillar that was completely different from the one used for the foldable Tiger tank previously.

The folding process is as follows.

Fit the front and bottom parts of the body.

Insert the part with wheels on the left side to the left side of the body.

Insert the part with wheels on the right side to the right side of the body.

Connect the tracks with a long one. Prepare two sets of this.

Put the prepared tracks on one of the wheels, align it with the concave groove of the rear wheel, and then insert and connect the beginning and end of the track. Connect the track on the other side in the same way.

Put the gun on the turret.

Attach the cartridge with adhesive.

Watch the following video for the folding process.

Print on prusa and folding process video -
https://youtu.be/7daxFoSDx6M
Print on CR10s and folding process video -
https://youtu.be/mWFDcVFlGJA
Print on Ender 3 pro and folding process video -
https://youtu.be/BblP4iJ_vlc
Print on Twotrees Bluer and folding process video -
https://youtu.be/9NCbOWKnubw

https://youtu.be/A2Jj92RyKYc

The collection of foldable Tiger tanks and foldable T34-85 tanks allows you to create famous battle scenes such as the Battle of Kursk and the Bagration Battle.

1 : 48 scale

When expanded, size = X 110mm, Y 139mm, Z 89mm After folding X 69mm, Y 162mm, Z 57mm

#t34 #t34tank #soviettank

Foldable tank T34-85

GOODesign_Foldable_Tank_T34-85_Hull.stl

Get commercial license and download newest models- https://www.patreon.com/goodesign
At the request of many customers, I designed a foldable humvee. The military humvee is very large, almost the size of a small tank. So, I put a lot of effort into making the unfolded size smaller so that it can be printed on ordinary 3D printers.

Many customers requested that the tires be printed separately and designed to fit, but this time we applied that request.

The process of folding and assembling this foldable military humvee is as follows.

Fold the engine and windshield slightly to fit.
Insert both side parts into the roof parts of the humvee.
Align the front and rear parts with the side parts in a good fit.
Press the lower part of this car into the front part and the rear part.
Fit each of the 4 tires.
Glue the front and rear bumpers.
It is complete by inserting the roof parts.
Please watch the video for more details.

Prusa print- https://youtu.be/OWTi2nzJIs4
Ender 3 print- https://youtu.be/HOHgWZOEy_w

1 : 35 scale

When expanded, size = X 173mm, Y 183mm, Z 45mm After folding X 64mm, Y 140mm, Z 56mm

Foldable Humvee/Hummer

GOODesign_Foldable_Humvee.stl

Get commercial license and download newest models- https://www.patreon.com/goodesign
With the request and high vote from FAB365.net's request page, I designed this foldable Willis Jeep.

Through this folding Willis MB Jeep, I made my first convertible car. The convertible car requires a lot of work as it is necessary to make a chair and interior, and there is little space to put the structure. In this work, I found it very difficult to make a convertible car by folding it.
This time, I inevitably adopted a way to separate the wheels. And some parts were printed and attached separately. The hood can be opened and closed, and the windshield can be rotated forward. The wheels also roll very well.

The folding process is as follows.
1. Rotate the front part of the jeep and turn it over.
2. Connect the lower body to the upper body.
3. Close the hood and move the windshield forward and tilt it back.
4. Press and fit each of the four wheels.
5. Put the fuel tank base on the back and put the fuel tank on top.
6. Attach the spare tire to the rear of the vehicle.
7. Cut the filament to a length of 18mm, fit it on the steering wheel, and apply adhesive to the front hole of the driver's seat.

Check youtube videos about folding process below.

1 : 32 scale
When expanded, size = X 73mm, Y 104mm, Z 37mm After folding X 50mm, Y 108mm, Z 52mm

Foldable Willys MB Jeep

GOODesign_Jeep Body.stl

Get commercial license and download newest models- https://www.patreon.com/goodesign
In response to numerous requests from customers, I designed the F-22 Raptor for 3D printing.
The main features are:
1. The missile hangar can be opened and closed.
2. The angle of the wing flaps can be changed.
3. The angle of the horizontal tail wings can be changed.
4. The angle of the thrust vectoring flap at the rear of the engine can be changed.
5. Landing gears can be equipped.

Precautions to be taken when printing and making are as follows:

1. When printing wings, it is recommended to use a brim so that it does not fall off the bed during printing.
2. If the brim is not cut accurately, the parts may not fit well, so please remove the brim carefully.
3. The flap of the main wing is not designed to move, but is designed to be attached to the user's desired angle.
4. Hold the thrust vectoring flap at the rear of the engine with pliers and turn it into place.

1 : 72 Scale
Largest part in printing, size = X 93mm, Y 130mm, Z 132mm, After full assembly size= X 194mm, Y 263mm, Z 73mm

Design by GOODesign

F-22 Raptor

GOODesign_Foldable_Lockheed-Martin_F-22-Raptor_Fuselage.stl

Looking for a unique and eye-catching 3D model? Check out the visually intimidating yet fully functional Tank Tread Cannon Beer Can Holder, an effective solution to prevent anyone from touching your beer. Awesomely designed by CL3D PRINTING, this 3D model elegantly unites aesthetics of a standard Navy CIWS Gatling gun and a tank, ensuring it stands out, be it at a party or on your office desk. The detailed design is impressive, and the model comfortably holds a standard 12-ounce can. Whether for holding your beer or just to stop co-workers from stealing your pens, this model makes a statement. The model is easy to print, without support if your printer is finely tuned. If not, simply add some support to the treads' underside at the front and back, and underneath the koozie section. 

Provide safety to your beer with some firepower with this 3D model - The Tank Tread Cannon Beer Can Holder.

Military

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Barrett M82 Keychain — Functional Blaster Toy

Ammo Box Container — Military Style Storage Box

Alien APC

Cannon War Machine - with Free Monsters Series Pdf - Tabletop, RPG, Wargames, Dark Ages

Foldable Tank T-34-76 1941

Foldable tank sherman

Foldable Tank TIGER-I early production

Foldable tank T34-85

Foldable Humvee/Hummer

Foldable Willys MB Jeep

F-22 Raptor

Tank Tread Cannon Beer Can Holder