I present you the new addition in our dragon bust  collection. The  Moon Dragon

Pre-supported  .lys and .stl files included for resin printing

Moon Dragon bust - (Pre-Supported)

Moon_Dragon.stl

If you want support me or sell physical prints of my designs,
please become a Paid Member

patreon.com/Yuskovych

Assembling: https://www.youtube.com/watch?v=Vt0Cvrj8lN0

Sunset Motion Lamp is a moving lamp that creates a sunset effect using interchangeable scenic backgrounds.

The lamp can be used both as a wall lamp and as a desk lamp.
It can be easily transformed between these two modes, as shown in the Instagram video.

Backgrounds
The first release includes 3 backgrounds.
More backgrounds will be added later.

Additional hardware (not printed)
Bambu Lab 60mm lamp
Reed switch
Magnet D4 H2

Use 2screws or adhesive tape for wall version.

PRINTING NOTES
All parts print normally, except the backgrounds.
Make sure your filament is translucent good.

Use:

10 bottom layers
10 top layers
This is required to achieve proper light diffusion.

If your background is too transparent print the Diffuser part
Place the Diffuser onto the lamp
The Diffuser file is included in the download

Sunset Motion Lamp and screens

Screens.3mf

Get commercial license and download newest models cheaply- https://www.patreon.com/c/goodesign

The spacecraft designed this time is SLS -Space launch system Block 1, which launched Artemis 1.
This rocket is an item that has been requested by many customers.

The assembly process is very simple, but please align before assembling to prevent wrong joint.

If the Solid Rocket Booster on both sides is connected incorrectly, the upper and lower parts may not match, so please check beforehand.
The Solid Rocket Booster and Core stage parts need to be glued together to make them strong.

The X-shaped frame of the interim cryogenic propulsion stage is folded and connected. Be sure to check the position before gluing.

The device connecting the solid rocket booster and the core stage should be connected with the bottom facing downward.

The solar panel of the Orion capsule is connected by exchanging the folded and unfolded ones, so you can replace them as needed.
The folded solar panel can be folded and attached using adhesive.
The unfolded solar panel has a hinge, so it can express a slightly folded state.

When connecting Solid Rocket Booster and Core stage, check the shape and location of the hole at the bottom before connecting.

Please refer to the video for detailed process.

https://youtu.be/QPSA_lYdnKc?si=HVKfpgh5btnpTHsd

It is hoped that Artemis 1's mission will be successful and humans will be able to go to the moon again.

1 : 144 scale

Largest part in printing, size = X 199mm, Y 194mm, Z 199mm, After full assembly size= X 135mm, Y 68mm, Z 682mm

Total Build Time : 119h 05m / Plastic Weight : 474.6g
Design by GOODesign

SLS Space Launch System Block 1

GOODesign_SLS_ICPS.stl

Get commercial license and download newest models cheaply- https://www.patreon.com/goodesign
I designed a display stand for the Apollo 11 lunar module.
It represents the surface of the moon and was designed to allow the lunar lander to be placed stably. In order for the lunar module to be positioned stably, four places where the legs would be placed were hollowed out.
When placing the lunar module, the Lunar Surface Sensing Prope was designed so that it could be folded up or unfolded and inserted into the hole where the legs are placed.

Of course, we also created astronauts. There are two astronauts, one standing and one coming down the ladder.
The pose of these two people depicts the famous photo taken when Apollo 11 landed on the moon.
When an astronaut coming down a ladder aligns his or her feet and hands, the elasticity of the ladder allows them to fit well and be fixed.
The astronaut is equipped with a support, but be sure to remove it after printing is complete.

A hole was also made into which the American flag (Stars and Stripes) could be inserted.
And since the American flag is included both reversed and non-reversed, please choose and print it according to your preference.

Please check the video for detailed display process.
I imagine that one day humans will reach the moon again and build a base.

Print and build video - https://youtu.be/Y_bX2YSoK5M

Go to see Apollo 11 Lunar module - 
Largest part in printing, size= X 180mm, Y 180mm, Z 52mm, After full assembly size= X 180mm, Y 180mm, Z 52mm

Total Build Time : 2d 12h / Plastic Weight : 280g

Lunar module display stand

GOODesign_Display_Stand.stl

**Support My Work**
If you appreciate my designs and would like to support my work, or if you're interested in purchasing individual models instead of a subscription, here are some options available:

Cults3D: [Purchase individual models here](https://cults3d.com/en/users/fulv/3d-models)
Thank you for your support! If you have any questions, feel free to reach out at fulv@me.com.

**Haunted House Model - Overview, Printing, & Purchase Guide**

**Model Features:**
- Includes: A beautifully designed haunted house with a choice of two moons: 3D Lithophane Moon (114mm diameter) &2D Lithophane Moon (114mm diameter)
- Design: No supports needed for printing; the model is designed to incorporate lights and serve as a spooky lamp.

**Printing Specifications:**
- Filament Choices: Polyterra PLA & PolyLite PETG (recommended for windows; transparent PLA is also suitable). 
- Link to buy Polymaker filaments in the USA:
[https://us.polymaker.com/?aff=824](https://us.polymaker.com/?aff=824)
- Layer Height: Layer Height: All parts, including the moon, should be printed at 0.2mm.
Moon Printing Tip: It's recommended to print the moon with a rim to ensure good bed adhesion.
- Slicing and File Management: All STL files are included in a zipped folder, organized for easy navigation.

**Build Plate Requirements:**
- Minimum Size: 205mm x 191mm x 128mm.
- If your build plate is smaller, scale the model down by 5% to 7%.

**Estimated Model Size** (Fully Assembled with Moon):
- Dimensions: 204mm (8.0in) x 281.5mm (11.1in) x 304.2mm (12.0in).

**Print Times:**
- The longest print will be the House main walls (approximately 20 hours at 30mm/s speed).
- All other parts will take significantly less time.

**Lighting Options:**
- Interior Lighting: Recommended to use cheap battery-powered wire Christmas lights.
- Moon Lighting: Designed for a USB small light bulb like Toolmoon. The model can accommodate:
- One bulb with a vertical connection
- One bulb with a 90° connection
- Wires can be routed out of the model through a cut-out at the back next to the back door steps.

**File Organization:**
- STL files are grouped into folders for easy navigation within the zipped file.

**Assembly Instructions:**
- Full step-by-step instructions are provided in the zipped file. Minimal glue is needed for assembly.
- For any questions regarding printing or assembly, feel free to reach out for support!

**Contact Information:**
If you have any questions or need assistance, feel free to reach out!

Fulv

fulv@me.com

[Watch the Video Here](https://www.youtube.com/watch?v=PEon8VDzKPU)

Enjoy creating your spooky haunted house! If you have any further questions, just let me know!

MOON

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Moon Dragon bust - (Pre-Supported)

Sunset Motion Lamp and screens

SLS Space Launch System Block 1

Lunar module display stand

Haunted House w/ 3D Moon