Microscope Slide Holder

A microscope slide holder for 26 x 76 x 1mm (1" x 3" x 3/64") microscope slides. It can hold up to 3 slides, makes comparing slides easier. Sometimes I have to check 20+ samples and also compare them at times. This helps me do it without swapping slides each and every time.

The microscope slide holder dimensions are:

86 x 128 x 3 mm

The slide holder fits on our Olympus inverted microscope with linear rail holders.

Infill percentage doesn't really matter, 100% will increase print time slightly compared to lower percentages. I did mine 100%.

gridfinity-rebuilt-microscope.stl

I've modded a 3x1x6 bin to have an open front with a slot for a microscope slide. Advantages over Zack's: 1) it is a single part, 2) the microscope slide fits tightly enough that it doesn't require glue. Disadvantage over Zack's: 1) it requires supports. It's a mod from kennetek's OpenSCAD bins, and I've submitted a PR to them.

Cable holder Zeiss-Standard-20 Student version.stl

Kabel-Halter-Zeiss-Standard-20 v6.stl

MICROSCOPE FOR PEDAGOGICAL USE, FOR TEACHING OR SHOWING.

BOLA1.stl

Cable holder Zeiss-Standard-20 Need Strorag.stl

Kabel-Halter-Zeiss-Standard-20 v4.stl

Microscope Insert

I made this because the insert in our brightfield microscope had too big of an opening when using small Petri dishes (35 mm). This insert fit like a glove and had a smaller opening for easier use. Note it has a cone shape for free movement of the objectives and a small indentation that stops it from spinning when fitted onto the microscope stage.

MICROSCOPE

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Microscope Slide Holder

gridfinity-rebuilt-microscope.stl

Cable holder Zeiss-Standard-20 Student version.stl

MICROSCOPE FOR PEDAGOGICAL USE, FOR TEACHING OR SHOWING.

Cable holder Zeiss-Standard-20 Need Strorag.stl

Microscope Insert

Microscope Slide Display Stand

Microscope Sample/Slide Holder - Fixator edition

extension arm for micro 150mm.stl