Overwatch 2 Version D.Va Headset Printable Model

headset.STL

Horizon Aloy Focus LED Ready

focus.STL

Lawn Light Spike.3mf

The pointy part that sticks into the ground for LED Lawn Lights

MoccaMaster LED Cover

The clear plastic cover for the red status LED on our Technivorm MoccaMaster broke. I modeled and printed a replacement part in clear polycarbonate. It is odd shaped because it grips onto an LED that behind the cover is shaped like a small Christmas light. 

Includes Fusion360 file. (I originally made a shallower version which is shown upright on a green cutting mat.)

HMG7 40mm Fan Dial Gauge Holder Press.stl

This STL is a component of the Hero Me Gen7 Printhead assembly for 3D printers.

**Hero Me Gen7 is a modular printhead platform for 3D printers with excellent part cooling and the most compatibility across printers, hotends, extruders, ABLs, and other components.**

 The Hero Me Gen7 is all about choice and personal preference. If you have been upgrading your 3D printer, you've made choices about what is important to you, Your choices are likely going to be different from everyone else. When choosing a hotend, extruder, and ABL combo (not to mention fans and accelerometers), where are you going to find a printhead platform that will accommodate all your selected components (which could be a rare combo), for your specific 3D printer AND provides part cooling that gives you great print results. **This is what the Hero Me Gen7 is all about!**

Think of the Hero Me platform as lego blocks for printheads, there are mounting parts for each component (hotend, extruder, fans, ABLs, etc.) that stack and mount to a core Base. Component specific mounting parts can be interchanged for another of the same type. So, should you change your component selection(s) in the future, you do not have to start over, you simple replace the single STL mount that is matched to the new component. There is no need to yet again go looking for a new set of mounting hardware that was not likely to have been designed to work with each other in the first place.

So to give you choice and fulfill your personal preferences in 3D printing, the Hero Me Gen7.3.2 now supports over 100 3D Printer models (plus clones), 46 Hotends, 34 Extruders (over 45 mount options), 17 ABL Sensors (34 mount options), 35 Part Cooling Duct options, 12 Cable Management options, 11 ADXL345 mounts, and 4 LED bar mounts (among many other options). Gen7.3.2 supports most of the popular 3D printers and components available. 

If you know your 3D printer model, hotend, fans, and optionally an extruder, ABL sensor, ADXL345 accelerometer (for Klipper), and any other options for your printhead assembly, you can scan through the Hero Me Gen7 Release 3.2 folder, or use the Thangs Advanced Search.  Be sure to set the creator filter to: ‘MediaMan3D’ then search for ‘HMG7’ which should bring up all the STLs. You can refine your search from there by component, brand, etc.

If you find that you have a 3D printer model or component that is not yet supported, send me information and preferably a STEP or STL (or link) if you know of one for the X carriage of that printer or the component and I will create a mount for it. Send to: [MediaMan3D@gmail.com](mailto:MediaMan3D@gmail.com)

If you want Hero Me documentation… The Hero Me Gen7.3.2 folder of STLs on Thangs is organized into sub-folders by component category, with sub—sub-folders for type and brand with well defined filenames to make it easy to find what you need. If you want documentation to help you select and assemble the Hero Me Gen7 for your specific 3D printer, you can get a membership plan here on Thangs.  You will get a detailed 56 page parts selection and illustrated assembly guide along with assembly videos, private Discord server access (with over 2,000 Hero Me users), technical support, and much more, You also get exclusive access to new STL releases 30 days before being posted to Thangs, and other STL libraries. Check out the membership plans here:  [https://thangs.com/designer/mediaman3d](https://thangs.com/designer/mediaman3d)

HMG7.3 LED Curved Bar Lightweight 5015 Ducts Alt.stl

HMG7 LED Straight 51mm Lightweight 5015 Ducts.stl

HMG7.3 ABL Offset Measure.stl

Led strip diffusor

diffusor.stl

LED Tischaufsteller 15cm inkl. TP4056 & 16850 Akku

LED_Halterung_15cm_oben.stl

Brillar LED Remote Control Wall holder 

A quick simple print to mount your Brillar Branded light remotes on the wall. Print may need a brim depending on your bed adhesion but worked well on my 2 machines. .STEP is available for free on my gumroad.

Brillar Remote Control Holder

Drone Gate Light Rod 

Hey, this is an enclosure and stand for a light rod that i made for my brothers drone racing tiny whoop group (BTW, Birmingham Tiny Whoops) as a slalom obstacle. 
The LED strip is inserted into a length of 20mm oval conduit that you can get from Screwfix or Wickes. the Tri-pod style legs are made from 16mm oval conduit.
it is sized and shaped as quadrants to be able to fit inside a poster tube of which the ID is 110mm.
the two "IN/OUT" square holes are for RJ45 breakout boards to provide Data and Power to each unit in a daisy chain.(https://www.amazon.co.uk/gp/product/B083C4LYQL/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1)
Internal height of this print is designed to accommodate a DC DC converter for power (https://www.amazon.co.uk/gp/product/B07H5MC6V3/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1) 
Cover is attached to Base with M3 machine screws with heat set brass inserts.
hole in a hole in the bottom is for a M6 heat set threaded insert for screwing in a M6 hook. small hole perpendicular to the M6 one is for a wooden skewer for a loop of string or paracord.

Printed with minimal supports
10% infil
4 walls/top/bottom
0.2 layer height
0.4 nozzle

TRIPOD LAMP (WUMI) - LAMP KIT LAMP / BASKET STYLE LAMPSHADE / DESIGNER LAMP / MODERN HOMEDECOR

BASKET_STYLE_LAMPSHADE.stl

Skull Vase V2

Skull_V2_FULL_not-for-vase-mode.stl

Mini Lamp F037 by UMINO

MF037SHADE.stl

Rope Lamp

Rope Bottom.3mf

Mini Lamp F035 by UMINO

MF035SHADE.stl

2-in-1 Minecraft Lantern Bundle (Floating & Hanging) 

ALL TOGETHER HANG.stl

Cyber Girl - System Override Heart Engaged

Figurine_Head.stl

Ultimate Modular Hot Wheels Display System (Wall & Desk Mount, LED Ready) - 1/64 Scale

Modular_Hotwheels_Display.stl

Led

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Overwatch 2 Version D.Va Headset Printable Model

Horizon Aloy Focus LED Ready

Lawn Light Spike.3mf

MoccaMaster LED Cover

HMG7 40mm Fan Dial Gauge Holder Press.stl

HMG7.3 LED Curved Bar Lightweight 5015 Ducts Alt.stl

HMG7 LED Straight 51mm Lightweight 5015 Ducts.stl

HMG7.3 ABL Offset Measure.stl

Led strip diffusor

LED Tischaufsteller 15cm inkl. TP4056 & 16850 Akku

Brillar LED Remote Control Wall holder

Drone Gate Light Rod

TRIPOD LAMP (WUMI) - LAMP KIT LAMP / BASKET STYLE LAMPSHADE / DESIGNER LAMP / MODERN HOMEDECOR

Skull Vase V2

Mini Lamp F037 by UMINO

Rope Lamp

Mini Lamp F035 by UMINO

2-in-1 Minecraft Lantern Bundle (Floating & Hanging)

Cyber Girl - System Override Heart Engaged

Ultimate Modular Hot Wheels Display System (Wall & Desk Mount, LED Ready) - 1/64 Scale