Low poly skull Christmas ornaments tree

A low poly skull hanging in your christmas tree? Why not, low poly christmas :)

Llama low Poly  Christmas Ornament pendant

Low poly 3d llama for home decor and low poly lovers. Also included a Christmas version with a ring to hang it in the tree as a christmas ball.

It is the small version of LLAMA 3D puzzle, you can scalate it as you desire

Happy Xmas!!!

SHAKE 1 Box Container Pen pot

SHAKE_1_model_A.stl

low poly moledude

LOW POLY BULLDOG - No support, Bottom Fixed

Famous Bulldog 3d model, but no support needed, and bottom fixed.

 Low Poly Crop Duster Airplane 

Low Poly Crop Duster Airplane designed for Loyal Moses's BMR 2021 Christmas Community Print Drive to help print and ship free gifts to families and children all over the world this Christmas season.

Prints without supports.  Model in the photos was printed in Printed Solid Jessie PLA on a Prusa Mini+ at 0.25 Layer Height and 10% infill. 


Low Poly Oddish

**Printing, Assembly & Post Processing**
					
**FDM or Resin:** Either (I've only printed FDM so far)	
**Scaling:** All Low Poly Pokemon are currently at the smallest scale I like to FDM print them at, but you can scale up or down in the slicer as you please and they should be fine.
**Supports:** None
**Nozzle Size I Used:** 0.6			
**Infill/Perimeters:** Your preference, but since they are decorative you would be good with very little.
**Layer Height:** I printed with 0.6 mm with no issues, any large might cause problems on the thinner parts.  

Post-Processing/Assembly:
None needed, but you can if you want.  I could see painting they eyes black might look nice.

**This design is uploaded with a non-commercial license. Purchasing this file does not grant you the rights to sell commercially.

If you would like to consider gaining access to ALL of the models and the rights to print and sell, you can check out my Patreon at https://www.patreon.com/thinair3D				

Elephant Low Poly

Remix of:
https://www.thingiverse.com/thing:2489000

made the bottom flat and the model actually solid.

Low Poly Eevee | Pokemon 3D Model

**Low Poly Eevee Model
**
I present my first go at a Low Poly Pokemon! I plan to do many other Pokemon (specifically the originals) and figured who better to start off with than Eevee.

Dimensions: 50mm (X) x 30mm (Y) x 50mm (Z)
Approximate Print Time: 1.5-2 hours depending on settings

I decided to create my own series of Low Poly Pokemon to add to the already amazing selection already available by other designers.

This is somewhat of a start to an ongoing exercise for me to improve with Low Poly modeling and mesh manipulation in Blender, but my overall goal is to capture unique poses and positions with as many Pokemon as I can!

Feel free to give me a follow to catch the next releases, and tag me on Instagram @thinair3dprints. I would love to see your print!

This file is uploaded with a non-commercial license, but if you wish to sell this or my other designs you can join my Patreon!

Patreon.com/thinair3d

**3D Printer Setting Used:
**
I suggest using whatever standard settings work best for you for simple decorative pieces, the model prints very easily. Here are the particular settings I used:

Nozzle Size: 0.6
Layer Height: 0.2
Infill: 5% (Adaptive Cubic)
Perimeters: 2
Support: None

Scaling: I would suggest only scaling up, but not scaling down any further, otherwise you may have issues with the ears being too thin.

You can lower your Layer Height to get better quality than the 0.2 LH I used!

Low Poly Corn Combine Harvester

Low Poly Combine Corn Harvester designed for Loyal Moses's BMR 2021 Christmas Community Print Drive.

Prints on without supports.  Model in the photos was printed in Printed Solid Jessie PLA on a Prusa Mini+ at 0.25 Layer Height and 10% infill. 

Fixumdude_Combine-CornHead_001.stl

Low Poly Bulldozer

Low Poly Bulldozer designed for Loyal Moses's BMR 2021 Christmas Community Print Drive.

Prints without supports.  Model in the photos was printed in AIORobotics Yallow PLA on a Prusa Mini+ at 0.3 Layer Height, 3 perimeters & top/bottom layers, and 10% gyroid infill. 

 Low Poly 80s Ford Style Stepside Pickup Truck

Low Poly 80s Ford Style Stepside Pickup Truck designed for Loyal Moses's BMR 2021 Christmas Community Print Drive to help print and ship free gifts to families and children all over the world this Christmas season.

Prints on its side without supports.  Model in the photos was printed in AIORobotics Red PLA on a Monoprice Select Mini at 0.2 Layer Height and 10% infill. 

LOW POLY

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Low poly skull Christmas ornaments tree

Llama low Poly Christmas Ornament pendant

SHAKE 1 Box Container Pen pot

View 19 new models

LOW POLY BULLDOG - No support, Bottom Fixed

Low Poly Crop Duster Airplane

View 35 new models

Elephant Low Poly

Low Poly Eevee | Pokemon 3D Model

Low Poly Corn Combine Harvester

Low Poly Bulldozer

Low Poly 80s Ford Style Stepside Pickup Truck

Low Poly Farmers