Diana, the War Sister Purifier (Painting Guide Included)

2104_ch_h_battlesister_purifier_full_ps.stl

Vine Christmas Tree

vine_christmas_tree.stl

Nintendo Switch Cartridge Organizer for SKÅDIS

NScartridgeSliderTOP.stl

Little Dragon

gracewindale_dragon.stl

Starburst Christmas Ornament

**ABOUT THE DESIGN**
This is a new variation on my Christmas Balls with Integrated Stems and diamond patterns.

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**RESIZING**
These should scale up well, but I'm not sure how much smaller you could print them using a consumer FDM printer. Using a resin printer, you could probably print them much smaller.

**PRINT TIME**
About 4.5 hours.

**PRINT SETTINGS**
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height. I decreased the print temp from my usual 200 to 190 for this, decreased the flow from 115 to 105, and increased the outer wall speed from 20 to 30 mm/sec. That was enough to go from stem that was molten goo to one that printed perfectly.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 – 0.8 mm.

I had the best results using Cura setting the default width to 0.4 mm with an alternate extra wall. 

*Infill*
This does not need any infill. JUST DON'T DO IT.

*Speed*
* Outer Wall: 30 mm/sec
* Inner Wall: 30 mm/sec
* Top/Bottom Speed: 30 mm/sec
* Travel Speed: 50 mm/sec

*Build Plate Adhesion*
I relied on the supports for build plate adhesion. 

*Supports*
You will probably need supports for both bed adhesion and the overhang on the first few layers. You shouldn't need supports for the loop at the top. Adding them would just increase the chances the supports broke and caused the print to fail. 

* Support Structure: Normal
* Support Placement: Touching Buildplate
* Support Overhang Angle: 49 Degrees

I added a support blocker 75 mm x 75 mm x 110 mm set 15 mm above the build plate so that the supports would only be added to the bottom of the ornament.

Diamond Lattice Christmas Ball

Free Alicorn - Winged Unicorn - Wall Decor 

AlicornWallDecor-RADesigns.3mf

Modular Jewelry Holder

Jewelry Holder Panel - Diamond.stl

Drop-In Nut - Weight Bearing Snap - M4

Drop-In Nut - Weight Bearing Snap - M4.stl

HellboybUST.stl

Evil baby Yoda (Grogu)

For a bit of fun, I took three excellent Thangs and tweaked them a little to create an evil Baby Yoda. Is Grogu going to become a force for the light or the dark side in the Mandalorian? I don't know, but if he looks like this, don't buy a second hand 3D printer off him.

My thanks to the original artists whose superior work made mine possible.

https://thangs.com/krisz0422/BABY-YODA-SOUP-18146

https://thangs.com/ameerawwad/skull-with-mandibule-15080

https://thangs.com/norahcs203/custom-lightsaber-hilt-stl-7147

Playful Bond Sculpture – Cat and Kitten Figurine

Cat mother and son.3mf

Mushroom Clicker!

MushroomClicker(3mf).3mf

Grabby Gecko Articulated Fidget Gecko - Keychain - Magnet - Ludo 3D Printed Flexi

L

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Diana, the War Sister Purifier (Painting Guide Included)

Vine Christmas Tree

Nintendo Switch Cartridge Organizer for SKÅDIS

Little Dragon

Starburst Christmas Ornament

Free Alicorn - Winged Unicorn - Wall Decor

Modular Jewelry Holder

Drop-In Nut - Weight Bearing Snap - M4

HellboybUST.stl

Evil baby Yoda (Grogu)

Playful Bond Sculpture – Cat and Kitten Figurine

Mushroom Clicker!

Grabby Gecko Articulated Fidget Gecko - Keychain - Magnet - Ludo 3D Printed Flexi

Spinny Plant Pot - Twist Together Pot with Built in Drip Tray

Safe | Vault | Bank | Money Bank | Piggy Bank

Moon Lithopanes

Fallout Inspired Vault Key Fob Assortment - Print in place

Pen holder - vase mode

Schoens Gyroid Egg

Vivianne Pitcher