Kitchen Twine and String Holder

An upright base for spooled kitchen twine or cotton thread. Tapered base allows for spools of different sizes from 10mm to 25mm.
Upper arm allows thread to easily unspool and minimize tangles. Place it on a taller shelf and pull down for easy one hand usage.

Solidworks part included so you can modify for your own purposes.

Kitchen Sink Organiser Caddy / Drip Tray

Sink Caddy Top - Brushes.stl

Woven Bowl (Large)

Part of a set of three nesting woven bowls.

See here for video: https://youtu.be/d0pOIjUBfOw 

Download the set for free:
Small: https://than.gs/m/902905 
Medium: https://than.gs/m/902906 
Large:


Woven Bowl (Medium)

Part of a set of three nesting woven bowls.

See here for video: https://youtu.be/d0pOIjUBfOw 

Download the set for free:
Small: https://than.gs/m/902905 
Medium:
Large:


Woven Bowl (Small)

Part of a set of three nesting woven bowls.

See here for video: https://youtu.be/d0pOIjUBfOw 

Download the set for free:
Small:
Medium:
Large:


Mini measuring cups (1 ml to 10 ml)

mini_measuring_cup_1_v4_7ml-Body.stl

Lid with built-in scoop/spoon (compatible with Argo corn starch jar)

Lid with built-in spoon - Quick release.stl

Cloth bowl

**A cloth-resembling bowl intended as decorative storage of small things.**
It is based on a 3d-scan that took me a long time to get done and optimized for printing.

**Scaling / size**
- Upscaling (100% +): as big as you want
- Regular size (100%): 210 x 210 x 49 mm 
- Downscaling (99% – 61%): works great
- Minimum size (60%):  126 x 126 x 30 mm
- Everything smaller than that will probably result in brittle features


**Print settings**
Material usage: 240g
Print time: 16h

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Outer walls: 3
Infill: 15%
Build plate adhesion type: none
If you experience any problems, please feel free to contact me on twitter or Instagram

Set of Cabinets

Gracewindale-cabinet-generic.stl

bowl "heliopora coral"

**A coral inspired bowl for whatever is just flying around and needs a proper storage location.**

**Scaling / size**
- Upscaling (100% +): as big as you want
- Regular size (100%): 200 x 200 x38 mm
- Smaller (80%): 160 x 160 x 30mm
- Small (60%):  120 x 120 x 23 mm
- I would not scale it down below 40%

Don't forget to post your makes!

**Print settings**
Material usage (100% scale): 200g
Print time: (100% scale): 17h

Material usage (80% scale):120g
Print time: (80% scale): 11h

Material usage (60% scale): 60g
Print time: (60% scale): 5h

Material: PLA
Print direction: stl is rotated correctly
Support: none
Outer walls: 3
Infill: 15%
Build plate adhesion type: none
If you experience any problems, please feel free to contact me on twitter or Instagram

bowl_heliopra.stl

Paper towel holder print-in-place

Papertowelholder_0.3_left.stl

Remix of Coiled Rope Mug

This coiled rope mug is made with a single loop of “rope” that coils up and then loops back to the beginning to form the handle.

See here for video: https://youtu.be/Ca8gKzsuz5Q 

See here for matching pieces:

Coiled Rope Mug:
Coiled Rope Vase:

Similar Coiled Rope Designs:

Nesting Rope Bowls:
Small: https://than.gs/m/811394 
Medium: https://than.gs/m/811395 
Large: https://than.gs/m/811397 


Coiled Rope Mug

Kitchen cleaver knife sheath

Rotating craft caddy

rotating craft caddy body

Lactuca Round Bowl

The organic forms in the Lactuca Series bear a resemblance to the contours of leafy lettuce. Stare at them long enough and your mind might start seeing strange plants and creatures begin to appear!

See here for video: https://youtu.be/yd4LJx4f3vk 

Other designs in the Lactuca Series:
Lactuca Round Bowl: 
Lactuca Cylinder Vase Small: https://than.gs/m/878846 
Lactuca Cylinder Vase Medium: https://than.gs/m/878851 
Lactuca Cylinder Vase Large: https://than.gs/m/878852 


Fully Printable Bottle Opener

This bottle opener, unlike other 3d printed ones that are designed to use coins or other metal objects to pry, is designed to function with plastic alone. 

Please leave comments, as I am trying to improve on the design.

Sink Grid Feet

Our kitchen sink came with a stainless steel grid to protect the bottom from scratches. The grid had plastic or rubber feet that eventually wore out and became gross. Lots of websites sell replacement grids, but I couldn't find anywhere that sells the feet. Luckily the are quite easy to model and print. 

My sink takes 8 feet so I print batches of 16 and just throw the old ones away after six months. I've done them in both natural TPU and black TPE, although I imagine many filaments would work fine.

Includes Fusion360 file.

Egg 2 Egg Tray

Get your kitchen on with a two egg holder that can hold even the largest of eggs.

Smashed Saucer

Frustrated by your 3D printer? Feel like smashing something? This model is for you!

See here for video: https://youtu.be/Zj9uAsy1CM0

This Smashed Teacup is part of a set of Smashed Tableware. See links below for other pieces in the set. More to come!

Other pieces of Smashed Tableware:
Teacup: https://than.gs/m/863790 
Saucer:


KITCHEN

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Kitchen Twine and String Holder

Kitchen Sink Organiser Caddy / Drip Tray

Woven Bowl (Large)

Woven Bowl (Medium)

Woven Bowl (Small)

Mini measuring cups (1 ml to 10 ml)

Lid with built-in scoop/spoon (compatible with Argo corn starch jar)

Cloth bowl

View 143 new models

bowl "heliopora coral"

View 31 new models

Remix of Coiled Rope Mug

Kitchen cleaver knife sheath

Rotating craft caddy

Lactuca Round Bowl

Fully Printable Bottle Opener

Sink Grid Feet

View 11 new models

Smashed Saucer

View 10 new models