**The angry chicken has finally arrived! 🐔🔥
Bring some attitude to your desk with this fully printable Grampette figure.**

The files include both a Fuzzy Skin version for a unique texture and a Smooth version for a clean finish.

🎨 Color Filament Guide
I printed this using Bambu Lab PLA filaments for a vibrant look. Here is the color breakdown:

⚪ White: Inner Eye Area

⚫ Black: Body

🔴 Red: Comb, Wattle, and Outer Eye Ring

🟠 Orange: Legs and Beak

🎥 Assembly & Finishing Tutorial
Before printing, please watch the YouTube tutorial for detailed instructions on finishing and assembly!
[https://youtu.be/7hw12yk_EOQ](url)


⚙️ Printing Settings
All necessary Bambu Slicer settings are included in the .3mf files for easy printing. .stl files are also included for other slicers.

The Angry chicken Grampette

Fully-chicken.stl

Due to the success of my Mounted Trash Bin, I've created this standalone version. It's a large trashcan that prints in several parts optimized for 3D printing, with plenty of variations and optional additions for total customization!

---

_**Printing & Assembly**_

Due to the optimized design, you can print most of these parts using default print settings. Nearly all the parts print without supports, but the new Locking Inner Rim requires support generation for a long bridge to allow for the improved lid flap.

Here is a description of the various parts:

- **Lid_Locking** : The lid of the trashcan, which snaps into place when fully opened for one handed operation. Print with 4 shells/perimeters for a hinge longevity.
- **Top_Rim_Inner_Locking** : Snap the Lid into this part. _Enable Supports!_
- **Top_Rim_Inner_Locking_Loose** _(optional)_ : A looser version of the Inner Rim, useful for thicker trashbags or less precise printing. _Enable Supports!_
- **Top_Rim_Outer** : This is the part you wrap the top of your trash bag around, which is then sandwiched into place with the Inner Rim. _There is an oval notch on the front of both the Inner and Outer Rim. Make sure they're oriented the same way!_
- **Lid_OG** _(optional)_ : The original version of the lid, without a flap on the front, and doesn't lock in the open position
- **Top_Rim_Inner_OG** _(optional)_ : Only use with Lid_OG
- **Corner_Post** : The four vertical posts that connect the Top and Bottom Rims. I would suggest 4+ perimeters/shells for strength. Print 4. Align with the channels on the Bottom_Rim and snap all 4 into place. Then set the Top_Rim_Outer onto the four posts and press each corner straight down to snap into place.
- **Bottom_Tray** _(optional)_ : This tray rests inside the Bottom_Rim to support the bottom of the trash bag. Useful if you're throwing away heavy things that might rip the bag if unsupported.
- **Bottom_Tray_Deep** _(optional)_ : Another version of the bottom tray with higher walls. Usefull if you are tossing things that might leak.
- **Foot_TPU** _(optional)_ : Small feet to be printed with TPU or another flexible filament. These are simply glued to the corners of the bottom of the Outer_Rim to add a cushion between bin and floor, for protection and non-slip.
- **Walls_Plain** _(optional)_ : Conceal the trash bag and keep it from bulging out if it's larger than the bin. Print in vase mode with 0.6mm extrusion width and 0 top/bottom solid layers. 
- **Walls_Fluted** _(optional) : Same as Walls_Plain but with a fluted texture that adds a bit of strength and decorative appearance. More likely to warp from filament shrinkage while printing!

---

Yes, it's a lot of parts, but the result is a nice, large, super functional trashcan that you can customize to your needs! Leave a comment if you have any questions or requests and I'll respond ASAP!

- **Nov 2, 2025 Update** : Added an 'ExtraFlex' version of the Corner Posts, which makes it easier to take apart and put together over and over.

---


Photographed model was printing with various PLA filaments on the [Qidi Plus4](https://qidi3d.com/products/plus4-3d-printer?sca_ref=6089281.BQS8d0sJuF) (Also [on Amazon](https://amzn.to/4jON7VK))

Wireframe Wastebin // Standalone Trashcan

Lid_Locking.stl

Corner_Post(4)_ExtraFlex.stl

Simple drawer handle with aesthetically pleasing design. Handle swivels up/down and helps hide the screw holes. Entire design is only half an inch thick with rounded corners so it does not catch onto clothing. 

Swivel Drawer Handle

Drawer Handle (1).stl

This drawer organizer is 45mm high and 55mm wide (inner size of cells). It's easy to print and can be assembled in different ways. No glue is required: everything is connect by snap joints. 
The following items are included in the model:
- 1x1 cell   
- 1x2 cell
- 2x2 cell
- lock for cell connection (snap joint)
- end piece to close the lock opening (snap joint)
Every cell size comes in two variations (open bottom and closed bottom) and with two lid versions. Check the video for assembly instructions

Drawer organizer H45W55 

H45_B55_cell_2x2.stl

**Don't forget to ❤️, add to a collection, and follow SUNA for more fun creations!**
___
This is probably not the first clean/dirty dishwasher magnet you've seen, but ~it is the coolest~ this one doesn't contain death crystals! A simple, easy way to keep track of your dishwasher - as long as you remember to flip the sign you will no longer have to guess & inspect dishes to figure out if it was run. There is also a blank sign for you to add your own text! Check the attached YT video to see a quick tutorial on adding negative modifiers like text to a model!

**Dimensions**:  100 x 60 x 4 mm (~3.9 x 2.4 x .16 in)

**Weight**: ~19g + 1g waste

**Additional Items**: You will need 2x Magnets, sized ~20x5x2. You can find them [here on amazon](https://www.amazon.com/gp/product/B07Q6564FB/).
Note that tolerances are loose on these magnets so if one does not fit well just try another from the set. You may also try a little glue if you have any issue with them coming loose. 

___
**PRINTING**:
- Clean your build plate! "Flat" models like this are more likely to shrink and peel up. 
- Print from either side. I prefer design face down on a nice textured plate like the cryo plate
- Print with at least 5 bottom & top shell layers, 2-3 walls, 0-20% infill
- 3mf included with all three designs and a layer change added at z=1.2mm (layer 6 for .2mm layers)

___
‼️ All models are the exclusive intellectual property of SUNA. SUNA models are protected under applicable copyright laws and international treaties. Unauthorized sharing, distribution, reproduction, or sale of these models in any form is strictly prohibited.

Users are granted limited rights to download and use models for personal, non-commercial purposes only. Any commercial use of these models, including but not limited to selling, modifying for sale, or redistribution, is strictly forbidden unless the user subscribes to a valid Thangs license with Commercial Rights.

Magnetic Dishwasher Sign - CLEAN | DIRTY

display_magnetic_clean_dirty_curlytext.stl

display_magnetic_full_set.3mf

**"This beautifully crafted piece showcases a detailed octopus tentacle curling from a porthole, bringing the mystique of the ocean into your home. Both a striking decoration and functional wine holder, it perfectly blends elegance and utility."**

[➡️Video by the talented _coco3d_](https://www.instagram.com/reel/DA2SxI1N2aG/)

➡️[As seen on the 3D Printing Nerd!](https://youtu.be/nZjmKJmkRco?si=oQqghf94uqOatbu_)

This awesome design print with no supports at all! And it can be printed in 2 colors on any printer. Just add a pause after printing the porthole window, swap filaments and keep printing. 

"For the tentacle I used Esun dual color Green-Blue Silk Pla."

**"All of my models are for personal use only, unless you are an active subscriber of Thangs with a commercial license."**

_3D PRINTING SETTINGS:_

-No supports needed!

-Factory files included for Bambu and Orca Slicers. For other slicers you can add a pause at 18.90mm and change colors manually.

-12% Rectilinear infill for the base, 7% rectilinear infill or more for the tentacle, 2-3 walls, 0.16mm layer height.


Octopus Tentacle Wine Bottle Holder / No Supports

Tentacle Wine Holder FF 2 Colors AMS FF.3mf

Tentacle Wine Holder STL.stl

This giant candy corn is a fun and functional 3D print for the Halloween season. Designed to look like a classic candy corn, it features two spacious compartments, making it great for storing candy, small items, or party treats.

It’s an easy print that doesn’t require an AMS printer, so it’s accessible for all 3D printing setups. Whether you’re looking for festive decor or a functional candy holder, this design offers both.

**Print Settings**
- Brims are recommended for the bottom and middle sections to prevent warping due to their large size
- No supports required
- 8-10% infill
- 2-3 walls
- 0.4mm nozzle
- 0.2mm layer height

**Assembly:**
https://youtu.be/P0vebxIbwFw

**PLA Used:**
Polymaker Peach: https://amzn.to/3ZcBEs6
Polymaker Muted Red: https://amzn.to/3Za9EVW
Polymaker White: https://amzn.to/4gCycNG

Giant Candy Corn Container - Functional Halloween Treat Holder with Two Compartments

pixelandpapier__candy_corn__bottom.stl

This will definitely make the party goers think twice before grabbing your goods. Printed in parts for ease of color changes. 

The Metal part of the handle needs supports but everything else prints support free. Make sure to add some extra external layers for the blade or it gets a little wobbly. 

Private Use Only.

Become a Maker Member for unlimited downloads or become a MERCHANT MEMBER for commercial use. 

Members get priority recommendations and customization. We would love for you to join!
Make sure to like and follow. Post your make so we can see!


Bloody Knife Bowl

Knife Bowl - Bowl.stl

Explore our vast collection of meticulously crafted 3D models at thangs.com. One of our top items is a highly structured Kitchen Cabinet Organizer designed by the talented designer JimmiboY. This model comprises practical components that aim to simplify your kitchen organization. These include holders for your sponges, garbage bags, dish clothes, and dish soap which have been designed to maximize accessibility, ensuring your kitchen essentials are always within easy reach. 

Although easy reach. 

Although functional, this bundle of 3D models has not compromised on aesthetics and would make a stylish addition to any kitchen. However, those with small children or pets should remember to position the dish soap element out of their reach for safety. Detailed images of these models can be referenced off the URLs listed above.

Designer JimmiboY also hosts an informative YouTube video explaining more about this creative design. Search for the video using the designer's name to gain deeper insights. Any purchases made significantly contribute to design refinement, so do not forget to leave some valuable feedback for continuous improvement. 

Start optimizing your kitchen organization today with this unique, functional Kitchen Cabinet Organizer available at thangs.com.

Kitchen cabinet bundle organizer

Wash cloth holder.stl

I made these mounted trash bag bins specifically for the Red/Green waste bags used in my region of Sweden, but you may find them useful for your own situations as well! I have mine mounted on the cabinet drawer under my kitchen sink for super convenient and accessible composting.

The design consists of four parts:
- A lid
- An inner rim that connects to the lid
- An outer rim that holds the trash bag and snaps onto the wall mount
- A beefy wall mount that securely clips onto the rim.

Default print settings should work out. I used PC filament to make the mount extremely resiliant but I suspect most filaments should be sufficient. The rest of my parts were printed with PLA. Share your results if you try something else!

The mount has holes for up to 6 wood screws, but I only used the top 4 and it's enough, even with short 19mm screws. The holes are sized for threads up to 4mm wide, but you should be able to expand the holes by pre-drilling if necessary.

**_July 18, 2025 Updates_**
- The lid and inner rim used to be a single print in place part, but this has proven to be unecessary. The parts are now split and you can flex the inner rim to snap the lid onto the hinge.
- Added a new **locking** lid! This upgraded lid snaps into the open position to stay up on its own.
- Looser version of the locking lid is also included. Useful for thicker trashbags or less precise printers.
- **note:** You **must** use the Locking Inner Rim together with the Locking Lid.
- **note:** The new Locking Inner rim requires **support material** generation turned on! It's a small amount of supports, but this enables the flap on the lid for easier handling.

--- 

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Bambu Lab Bambu Green PLA, Red PETG, and Clear PC filaments](https://bit.ly/bamFIL).*
*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_


Mounted Trash Bag Bin (Updated)

Lid.stl

Inner_Rim.stl

Inner_Rim_Locking.stl

Inner_Rim_Locking_Loose.stl

The **PLEIADES Soap Cover** is a quick and clever way to elevate your boring soap bottle. This fits bottles up to 57 mm x 83 mm x 103 mm tall with a 28mm opening.

---

My **PLEIADES** series of prints are designed to be printed in vase/spiral mode in your slicer. I suggest printing this model with a **0.4 mm nozzle width**. Adjust bottom solid layers to be 1.6 mm thick (or the maximum number of layers before the hole is covered). No top layers. **Make sure your slicer is not set to close small gaps.** In BambuStudio I set the _'Slice gap closing radius'_ to 0 mm

--- 

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Fillamentum PLA Extrafill Sky Blue](https://bit.ly/FM-xtra) (also at [MatterHackers](https://bit.ly/xtrafill)).*
*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_


PLEIADES Soap Cover // 57x83x103

PLEAIDES Soap Cover 57x83x103.stl

The Most complete set for creating your own medieval house!

The House Set includes:
- +70 Models
- 2 PDF Maps 90x60cm (grid & gridless)
*CNP WALLS SYSTEM*


*Latest update: November 7th, 2022

Models and Updates List:
https://docs.google.com/spreadsheets/d/1nhZK3T4H8tMsFjZtP9nbJ1Vyyuo4FwO6xzfTyP6h-WU/edit?usp=sharing


Join us on Patreon to stay on top of our newest releases and get our exclusive welcome pack.
https://www.patreon.com/castnplay

KITCHEN

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

The Angry chicken Grampette

Wireframe Wastebin // Standalone Trashcan

Swivel Drawer Handle

Drawer organizer H45W55

Magnetic Dishwasher Sign - CLEAN | DIRTY

Octopus Tentacle Wine Bottle Holder / No Supports

Giant Candy Corn Container - Functional Halloween Treat Holder with Two Compartments

Bloody Knife Bowl

Kitchen cabinet bundle organizer

Mounted Trash Bag Bin (Updated)

Medieval House Set (Pre-Supported)