Dippy the Tiny Dinosaur

Tiny Dino.stl

The Vukan Vase, Modern and Unique Home Decor for Dried and Preserved Flower Arrangement  | STL File

VUKANVASE.stl

Captain LeChuck - Monkey Island 3

lechuckfinal.stl

Planter castle

**A castle inspired planter with water drainage via the moat.**

**Scaling / size**
- Upscaling (100% +): as big as you want
- Regular size (100%): 153 x 157 x 102 mm with a inner size of ca 96x96x90mm and a wall thickness/small feature diameter of 2mm minimum
- Downscaling (99% – 61%): works great
Minimum size (60%):  62 x 65 x 61 mm with a inner size of ca 58x58x54mm and a wall thickness/small feature diameter of 1.2mm minimum
- Everything smaller than that is not tested but maybe possible :D

Don't forget to post your makes!

**Print settings**
Material usage (100% scale): 200g
Print time: 16h (100% scale): 16h

Material usage (60% scale): 50g
Print time: 16h (60% scale): 5h

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Outer walls: 3
Infill: 15%
Build plate adhesion type: none

Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, callibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.

If you experience any problems, please feel free to contact me on twitter or Instagram

Castleplanter.stl

Stitch Figure STL  + pre supported SLA

Stitch Figure STL.stl

Flexi Puppy

PUPPY.stl

Gear Pathing Maze - concept level

Gear_pathing_maze_concept_level_base.stl

Crochet Hippo

Hex Bin Gridfinity 1x4x4

Collapsing Dice Tower

This dice tower prints-in-place in the retracted position with no supports but after printing it extends to three times its original height. The drawbridge opens to allow the dice through, but a detent keeps it closed when traveling.  The funnel on top and the angle on the bottom mixes the die and makes sure they exit the tower every roll. There is a button on the bottom that locks the tower in position so it wont accidently extended. There is compartment on the bottom for storing dies with a built in catch on the lid.

It is designed to be printed with a .4mm nozzle. The walls are four shells thick, two shells are used for the brick inlay.

Note: if your tower does not extend all the way, pull it apart until you have the desired extension and leave it for a day or two. The plastic will eventually "creep" and you'll get the perfect fit.
Printed on the [Muldex]( https://github.com/3dprintingworld/MULDEX) rep-rap IDEX printer 
___
**Support and Licensing**
If you would like to help support more free models, or get permission to sell physical copies of my models, consider joining my [Patreon]( https://www.patreon.com/3dprintingworld)

Aston Martin VULCAN

The CatPart model has been converted to obj format so that it can be printed on a 3d printer. You can use the Catia software to preview the car in color. Run the .obj format to print from a 3D Printer.
Design Reference: https://grabcad.com/library/aston-martin-vulcan-1
Santa:
https://thangs.com/mythangs/file/37166
Christmas Minion:
https://thangs.com/mythangs/file/37168
Santa Hat:
https://thangs.com/mythangs/file/37164
Christmas Ornament:
https://thangs.com/mythangs/file/37167

Check out other designs here: https://thangs.com/haktanyagmur
M4Carbine:https://thangs.com/haktanyagmur/M4-Carbine-32489
Glock 17: https://thangs.com/haktanyagmur/Glock-17-32483
Batman Helmet: https://thangs.com/haktanyagmur/Batman-Helmet-22356
Iron Man Helmet: https://thangs.com/haktanyagmur/IronMAN-Helmet-22352
Turbo Jet Engine: https://thangs.com/haktanyagmur/TURBOJET-ENGINE-21555
P250 9mm Gun: https://thangs.com/haktanyagmur/P250-9mm-Airsoft-Toy-Printable-28408
Captain America Shield: https://thangs.com/haktanyagmur/Captain-America-Shield-printable-19774
Thor Hammer: https://thangs.com/haktanyagmur/Thor-Mijolnir-Hammer-24163
Thor Stormbreaker: https://thangs.com/haktanyagmur/Stormbreaker--24885
Batman Batpod: https://thangs.com/haktanyagmur/Batman-BatPod-24891
Darth Vader Helmet: https://thangs.com/haktanyagmur/Darth-Vader-Helmet-17220
Wall-E: https://thangs.com/haktanyagmur/WALLE-19346

K

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Dippy the Tiny Dinosaur

The Vukan Vase, Modern and Unique Home Decor for Dried and Preserved Flower Arrangement | STL File

Captain LeChuck - Monkey Island 3

Planter castle

Stitch Figure STL + pre supported SLA

Flexi Puppy

Gear Pathing Maze - concept level

Crochet Hippo

Hex Bin Gridfinity 1x4x4

Collapsing Dice Tower

Aston Martin VULCAN

Ceru Trash Bin

8x2 MU (4x1 LU) - MultiBoard Square Plate

Eclipse Bloom Vase for Nature-Inspired Home Decor

Heart Tower - Valentine's Day Decor

Articulated Dragon Keychain 021 - No Supports - Print in place

Galileo 2 PG7 Cable Gland Mount - FITS Voron 2.4! M12 too!

Candy Cane Sword Print-in-Place

FLEXI SNAKE V2 - SUPER FLEXIBLE 3D PRINTED SNAKE

Super Turtle Michaelangelo