Santa Skellington Ornament / Keychain / Earring 

Christmas Skellington Double Sided v1.stl

Jack Skellington Mask - Wearable Halloween Cosplay - 3D Print STL/3MF

Mask-Jack Skellington-SEREV3d.stl

Voronoi Halloween Pumpkin | Jack Skellington Style with a Twist

Voronoi Halloween Pumpkin Frikarte3D.stl

Jack skellington 

Jack skellington.stl

Jack Skellington Pumpkin Halloween Keychain

JackSP Keychain.stl

Jack and Sally Multicolor Nameplates and Backers

Jack and Sally Multicolor Nameplates and Backers.3mf

Flexi Baby Jack Skellington

Baby Jack Skellington.stl

Jack Skellington Cookie Cutters and Stamps

Jack Skellington - 100mm (4in) cutter and deboss stamp.stl

Jack and Sally Lightboxes

Jack and Sally LED Boxes.3mf

Jack Skellington House Multicolor

SkellyHouseAMS.3mf

Nightmare Before Christmas Lightbox

Nightmare Before Christmas LightBox.step

Pumpkin King Night Light

jack single color.stl

The Nightmare Before Christmas City Hall Building / Easy Print

Nightmare Xmas City Hall Bottom.stl

Jack Skellington 1 Inch Ear Plugs

jackPlugs.stl

Jack and Zero Diorama (Fanart)

Jack and Zero Diorama_Zero.stl

Jack Skellington

Jack Skellington.stl

Jack Skellington Band Poster

A quirky little Halloween print of Jack Skellington as if he's in a pop-punk band. You can replace the green with any colour you think fits, and the Teal with any light colour (grey, beige etc). Have fun! 

 

As with other Hueforge models, an AMS or an MMU is not necessary. All you have to do is set pauses where the filament swaps are being done, and then load the new filament in before resuming the print. 

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

 

**Filaments Used:**
- PLA Kingroon Black Transmission Distance: 0.4
- PLA BambuLab Basic BambuLab Green Transmission Distance: 8
- PLA META Sunlu Teal Transmission Distance: 5.4
- PLA Kingroon White Transmission Distance: 8

 
**Swap Instructions:**
- Start with Black
- At layer #10 (0.96mm) swap to BambuLab Green
- At layer #17 (1.52mm) swap to Teal
- At layer #23 (2mm) swap to White for the rest.

bandskellington_Front_160x213.3mf

Jack Skellington Pop Out Print - Hueforge Hybrid

This unique print-in-place Jack Skellington piece utilises a hybrid printing method that combines Hueforge filament painting and a traditional 3D print model. Jack's head sticks out of the print, giving it a little bit of a personality! 

 

**Important for this print:**  Black is repeated just before the head is printed. If you only have one AMS, I suggest leaving black in Slot 1 and removing AMS slot 2 once its finished printing to replace it with the colour for the head (if using something other than white).  If you are using white, you do not need to remove and replace anything! Just assign the white to the slot your white filament is in. 

The included 3MF has all the settings already applied if you are using the profile attached, but if you are downloading the raw files and using your own print profile, please follow the instructions below.
 

**Print Instructions**

1. The print swaps filaments 5 times, with the final time being the colour of Jack's head that ‘pops out’ from the print. In my print, I used a 5th colour (Glow in the Dark), but you can use what ever colour you want, or even reuse the white. 
2. I printed with supports for the head, but depending on your printer, you may get away with not having supports. I have altered the head to be printed with 5% infill.
3. I printed this file with adaptive layer heights for the head to speed things up (0.2 for the base of the head and 0.04 towards the top of the head). This should be reflected in the 3MF file. You can certainly do this, or use your own settings as well.
4. Post processing includes removing supports for the head, through the holes for the eyes. The tree supports that I used with my settings were fairly easy to remove, however if you are worried, please feel free to use your own support settings to ensure ease of clean-up and removal!  

**Filament Swaps**
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

 

**Filaments Used:**
- PLA Kingroon Black Transmission Distance: 0.4
- PLA+ Sunlu Red Transmission Distance: 6
- PLA META Sunlu Teal Transmission Distance: 5.4
- PLA Kingroon White Transmission Distance: 8
- PLA Overture Glow in the Dark Transmission Distance: 8 (this is your head colour!)

**Swap Instructions:**
- Start with Black
- At 1.04mm swap to Red
- At 1.2mm swap to Teal
- At 1.36mm swap to White 
- At 2.08mm swap to Black (this is a repeat colour!)
- At 2.92 swap to Glow in the Dark for the rest.  (Head Colour)

This print uses a model of [Jack's head](https://www.thingiverse.com/thing:1787394) created by Thingiverse user [vmatthews](https://www.thingiverse.com/vmatthews/designs.

Jack Skellington's Face Decor

Nightmare Before Christmas (Inspired) "Happy Printoween" Jack Skellington Halloween

It all began when Jack stumbled upon a portal to the human world, where he discovered the marvel of 3D printing. Intrigued by the possibilities, he brought the technology back to Halloween Town, much to the bewilderment of the other residents. Jack's workshop, already filled with cobwebs and cauldrons, soon featured a collection of 3D printers alongside his traditional Halloween crafting tools.

With his skeletal fingers, Jack eagerly designed and printed eerie decorations, elaborate masks, and even custom-made costumes for his fellow citizens. The 3D printers allowed him to bring his visions to life with an unprecedented level of detail and intricacy. Halloween Town's inhabitants, including Sally, the ragdoll, and the mischievous Lock, Shock, and Barrel, marveled at Jack's newfound talents.

Jack's love for 3D printing culminated in the grandest Halloween celebration Halloween Town had ever seen. Elaborate decorations adorned the town square, and each trick-or-treater received a unique, 3D-printed candy container. Jack even crafted a stunning, larger-than-life 3D-printed pumpkin carriage for himself to make a grand entrance at the annual Halloween Ball.

As Halloween Town's fascination with 3D printing grew, Jack's reputation as the Pumpkin King expanded beyond his traditional role. He became known as the 3D Printing King, adding a fresh twist to the spooky festivities every year. The fusion of ancient Halloween traditions with cutting-edge technology made Halloween Town the envy of all other holiday-themed realms.

Printed at .08mm Layer Height:

Black to Layer 4
Chrome to Layer 9
Grey to Layer 14
White to Top Layer

JACK SKELLINGTON

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Santa Skellington Ornament / Keychain / Earring

Jack Skellington Mask - Wearable Halloween Cosplay - 3D Print STL/3MF

Voronoi Halloween Pumpkin | Jack Skellington Style with a Twist

Jack skellington

View 27 new models

View 10 new models

View 12 new models

Jack Skellington Cookie Cutters and Stamps

Jack and Sally Lightboxes

Jack Skellington House Multicolor

Nightmare Before Christmas Lightbox

Pumpkin King Night Light

View 118 new models

Jack Skellington 1 Inch Ear Plugs

Jack and Zero Diorama (Fanart)

Jack Skellington

Jack Skellington Band Poster

Jack Skellington Pop Out Print - Hueforge Hybrid

View 11 new models

Nightmare Before Christmas (Inspired) "Happy Printoween" Jack Skellington Halloween