Flexi Elephant Keychain

A57_Elephant_Keychain_s.stl

 Filament Friday PETG Temperature Tower

This download includes the Temperature Tower Test Print and the GCode file that changes the temperature every block starting at 215C up to 240C.
The GCode was written for an Ender 3 (220x220mm) size bed but should run on just about any similar size bed.
Download the .zip file and you'll find the .stl and the .gcode file.
The LCD will show the change of temp at each block starting at 215C and up to 240C changing 5C at every block.
Fan runs at 50% speed.



Flexi Shiba Inu Keychain (Limited Time Free)

A43_Flexi_Shiba_Keychain.stl

Flexi Koala Keychain (Limited Time Free)

A50_Koala_Keychain.stl

Star Wars STAP Kit Card

STAP-card-color_1-card.stl

Hello Kitty - Fan Art

Hello Kitty - Fan Art
If you like my work find more here - https://www.myminifactory.com/users/printedobsession
if you want to support my work consider joining patreon - https://www.patreon.com/printedobsession
want to know more about my process? i have tutorials on youtube - https://www.youtube.com/c/PrintedObsession

CC BY-NC-ND
This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.

The Gelatinous Tarrasque

Slime Terrasque - full.stl

USB Cable organizer storage bin - Gridfinity

Cable storage bin with 10 18mm wide compartments, to fit various size USB or other cables. Fits USB cables up to 10ft length depending on diameter. Base is Gridfinity compatible 42mm squares (2x4), but top is not stackable.

Took about 12hrs to print in PLA on an Ender 5. No supports needed.

ATAT kit card 1 framed final.stl

Death Puss in boots - Puss in boots 2 - Fan Art 

Death Puss in boots - Puss in boots 2 - Fan Art 
If you like my work find more here - https://www.myminifactory.com/users/printedobsession
if you want to support my work consider joining patreon - https://www.patreon.com/printedobsession
want to know more about my process? i have tutorials on youtube - https://www.youtube.com/c/PrintedObsession

CC BY-NC-ND
This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.

Slime Ball Fidget Toy by Ruven Bals Print in Place

Slime Ball by Ruven Bals.3mf

The Monarch Caddy - Toolbox with Handle

Monarch Caddy.stl

Magic Planetary Egg Container

**Magic Planetary Egg Container**

This egg shaped container prints-in-place and uses a planetary gear stage on the bottom which allows it to open 4 times faster than its turned.

This egg is similar to the original [Planetary Egg Container]( https://social.thangs.com/m/53994), but I wanted to better hide the layer seem so I added details to the outside of the egg to better hide it. 

**Other Egg Containers:**
[Original]( https://social.thangs.com/m/53994)
[Mini](https://social.thangs.com/m/55450)
[Mega](https://social.thangs.com/m/54270)

**How it works**
The bottom outside shell is the ring gear, the outer top shell is the carrier, and the inner shell is the sun gear.  Rotating the bottom shell  while holding the top shell results in the plant gears rotating inner shell at a 4:1 ratio.  36 teeth of the sun, divided by 12 teeth of the planet, plus one.

**Print instructions**
Its roughly 112mm tall, prints in place, designed for a .4mm nozzle, .2mm layer heights, no supports at 100%.  There is a 4mm hex hole in the sun gear to free it up the gears if necessary.

**Remove the brims** 
There are four built in brims attached to the sun gear that will need to be removed, I did so easily with side cutters

Printed on the [Muldex]( https://github.com/3dprintingworld/MULDEX) rep-rap IDEX printer with Matterhackers [Quantum]( https://www.matterhackers.com/store/l/matterhackers-quantum-pla/sk/MS2XWRUN?aff=7457)(aff.) dual color filament. 

#MakerMadness
___
**Support and Licensing**
If you would like to help support more free models, or get permission to sell physical copies of my models, consider joining my [Patreon]( https://www.patreon.com/3dprintingworld)


MAGIC PLANETARY EGG CONTAINER.stl

Dummy Clicker

Dummy cliker.3mf

Monstera Coasters - Classic

Easy Print File - Monstera Coaster Set 3mf.3mf

Flexi Labrador Keychain

A54_Labrador_Keyring_s.stl

Pluto STL File – Cute 3D Printable Disney Dog – Chibi Cartoon Puppy Figure for Collectors – Kawaii A

plutolayerables.stl

Umbrella in a Rain Shower Artwork

Umbrella Art Complete.stl

ZILLOLAAB - ZIPPY THE BOT 🤖

Introducing **"**Zippy**" the Bot!**🤖

An articulated print-in-place robot that requires absolutely no supports or assembly.
Very easy to print, suitable for all skill levels, and it delivers excellent results with PLA.

This type of design, called Flexi's, are an absolute blast to interact with because of their playful, floppy movements that can go in all directions.

Feel free to share images 📷 of your prints on this page, or on social media by tagging me; I'd be thrilled to see and share them.

If you appreciate this design, please take a moment to visit my social media profiles and give them a follow.
Stay tuned for more upcoming designs! 😍

Thank you for your support! 🙏💖



Articulated Octopus

Octopus_v6.stl

J

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Flexi Elephant Keychain

Filament Friday PETG Temperature Tower

Flexi Shiba Inu Keychain (Limited Time Free)

Flexi Koala Keychain (Limited Time Free)

Star Wars STAP Kit Card

Hello Kitty - Fan Art

The Gelatinous Tarrasque

USB Cable organizer storage bin - Gridfinity

ATAT kit card 1 framed final.stl

Death Puss in boots - Puss in boots 2 - Fan Art

Slime Ball Fidget Toy by Ruven Bals Print in Place

The Monarch Caddy - Toolbox with Handle

Magic Planetary Egg Container

Dummy Clicker

Monstera Coasters - Classic

Flexi Labrador Keychain

Pluto STL File – Cute 3D Printable Disney Dog – Chibi Cartoon Puppy Figure for Collectors – Kawaii A

Umbrella in a Rain Shower Artwork

ZILLOLAAB - ZIPPY THE BOT 🤖

Articulated Octopus