Universal Lip Balm Chapstick Burt's Bees Holder For Car, Home, or Work

Chapstick or lip balm holder that can be used anywhere.  Zip tie slots, 3M Command Strips, screw holes.  Removable base to remove melted lip balm.

Lip Balm Holder zip FINAL 21FEB23.3mf

Creality K1 K3D cooling system

K1CS-02 - K3D K1 cooling system left part.stl

Blank Bust for 3D Pens

A quick little blank bust I made for decorating with your 3D pen (or however you like)

It prints at a tilt to avoid support material. Low infill should be fine, but you might want 3 shells or so to keep it from deforming from the heat of the 3D pen.

You can see my [demo video here](https://youtu.be/1qzaBxyKJn4?t=325) and find my latest [3D pen recommendations on my website](https://makeanything.design/favorites/#filaments).

 



Wedding Shadow Box

Plate 3.stl

Gridfinity DC Fan 12025 stand (fume extractor)

Gridfinity DC Fan 12025 stand
can be used as soldering fume extractor

PeeWee Herman -Stylized Tribute Bust

PeeWee_Bust.stl

Hextraction Secret Pachinko Tile

Let chaos reign with this unpredictable tile! Who knows where the ball will end up?

After printing, wedge some small pieces of filament into the holes to make the pegs. If the holes come out too small, touch up with a 2mm drill. You can also use M2 screws.

Hextraction Pachinko Tile

PUNISHER - KEYCHAIN

Punisher_Keychain.stl

TI SR-56 Lithium conversion adapter

This is an insert for the original Texas Instruments SR-56 calculator battery compartment. It allows you to take out the old (and probably leaking/non-functioning) rechargeable batteries and insert your own replacement lithium battery and charger.

I started this project while looking for ways to repurpose batteries out of the disposable vapes that are popular right now. I'd been harvesting the batteries for a while, and an old SR-56 was the first thing I experimented with.

The battery is just a generic lithium battery about the size of a AA, I can't link it specifically because I harvested it from an old vape.
The charge controller I used is this one from Tayda electronics I happened to have on hand: https://www.taydaelectronics.com/57170-dup-tp4056-lithium-battery-charge-control-module-dc-5v-1a-with-protection.html

It looks like at one point the original battery pack had pieces of plastic spanning across its length, however I received mine with these already broken off. If yours are already broken, or you don't mind breaking yours off on purpose, then this case simply sets right in to where the old batteries went. I secured mine with a piece of double sided tape and that was it.

I did decide to drill holes and screw my charge controller down instead of gluing or taping that. I was able to re-use a couple screws that came out of the same vape I disassembled to get the battery.

Battery Conversion V5.3mf

Alternate AnkerMake M5C Filament Guide

I ran the printer for a while without the filament guide, and when retracting, it made the spool bounce around a little more than I was comfortable with. I built this as an alternative to the top guide provided with the printer. You can print this guide with PLA or any other filament and with no supports needed. Reuse the clips from the guide provided with the printer sliding the tubing from the top toward the build plate.

Roberto -Futurama

Roberto.stl

GearSupport Phone Stand 

Phone Carriage.stl

Collapsing Jian

**Updated Collapsing Jian**
_Print-in-Place Version_

This is a updated version of a collapsing Jian I made a while back. Not only is the guard updated but I also made the blade tip more accurate. If you don’t know, a Jian is a type of Chinese sword. 

This version prints in place all as one part, the [replaceable blade]( https://than.gs/m/902014) version is available in my members library. 

**Printing**
Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on [how to print collapsing swords](https://www.dddprintingworld.com/pages/printing-collapsible-lightsabers-and-swords) on my website. If this is your first time printing, I would suggest you try the [test print]( https://social.thangs.com/m/23601) first. 

Printed on the [Muldex](https://github.com/3dprintingworld/MULDEX) rep-rap IDEX printer 
___
**Support and Licensing**
If you would like to help support more free models, or get permission to sell physical copies of my models, consider joining my [Patreon](https://www.patreon.com/3dprintingworld)


Filament Spool Stabilizer

The spool holder that came with my AnyCubic Vyper is not parallel with the ground, causing the spool to naturally slide to one side of the spool holder. 

If there's an overlap in the filament spool, it could cause the spool to jump off the spool holder.

I've created a bracket that easily slides into the spool and locks onto the spool holder. 

-No Support
-20-100% Infill

Low pressure tap pressurizer

PressurizadorBaixaPressão.stl

Abe Hand Controller Stand - UPDATED 15/07/2023

The first in a range of game themed controller stands. 


It also makes for an awesome desk toy for gamers.


As a huge fan of the Oddworld series, this one has special place in my heart.


Prints without support.

Wall mountable.


Printed in Isanmate Rainbow PLA

Abe Hand Controller Stand 

Parametric FreeCAD model for cell holders, for building battery packs

Parametric FreeCAD model for cell holders, for building battery packs.
In this model you can:
1. Set your cell width, for example 18mm for 18650 cells or 21mm for 21700 cells.
2. Set cell count in X and Y directions, for example 2x3, 5x7 or any number you want even 1x100.
3. Set general clearances for your print and separately for your cell fit.
4. Set standoff height, default is 6mm.
5. Set width for your strip, default is 10mm.
6. Set the size of your mounting hole, for mounting the top cover (yet to be modeled), or any other mounting method of your choice.

This model was made with the purpose of minimizing material usage and is possible to print without supports.

Hextraction - Spiral Tiral

Spiral tile.step

Hook for display board.stl

Hook for a display board (like ones you see at school)
Can hang coats hats and other things tht go on hookes

Cat Mario - Super Mario Brothers - Fan Art

Cat Mario - Super Mario Brothers - Fan Art

If you like my work find more here - https://www.myminifactory.com/users/printedobsession
if you want to support my work consider joining patreon - https://www.patreon.com/printedobsession
want to know more about my process? i have tutorials on youtube - https://www.youtube.com/c/PrintedObsession

CC BY-NC-ND
This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.

Human body

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Universal Lip Balm Chapstick Burt's Bees Holder For Car, Home, or Work

Creality K1 K3D cooling system

View 111 new models

Wedding Shadow Box

Gridfinity DC Fan 12025 stand (fume extractor)

PeeWee Herman -Stylized Tribute Bust

Hextraction Secret Pachinko Tile

PUNISHER - KEYCHAIN

TI SR-56 Lithium conversion adapter

Alternate AnkerMake M5C Filament Guide

Roberto -Futurama

GearSupport Phone Stand

Collapsing Jian

Filament Spool Stabilizer

Low pressure tap pressurizer

Abe Hand Controller Stand - UPDATED 15/07/2023

Parametric FreeCAD model for cell holders, for building battery packs

View 11 new models

Hook for display board.stl

Cat Mario - Super Mario Brothers - Fan Art