Mini Lamp F026 by UMINO

MF026BASE.stl

Drain Strainer 40mm

Drain strainer for 40 mm drains

**Printing**
Support from buildplate

Candy Cane Egg

candy cane egg top.stl

Tulip Vase

Tulip vase.stl

PINCH | Watering Can

PINCH_watering_can_0.5L.stl

Self-Orienting Ratchet Socket Wrench

Frame.stl

Knife block

**A beautiful knife block made with wooden skewers for flexible usage.**
The product can hold a decent among of knifes and other kitchen equipment of different size. Store anything you need for cooking in your way - without predefined slots. Even if you store few products, they will still fit tight due to the flexibility of the base.

**Instruction:**
- Print the thing
- Buy a pack of 1000 wooden skewers (cost me around 9 € ordered online)
- Tie the skewers together with a tip tie or rubber bands
- Place the skewers in the base
- If necessary, add skewers until the base is full but can still handle some knifes

This is the V3
Don’t forget to post your makes!

**Print settings**
Required build volume: 120 x 120 x 110 mm
Material usage: 110g
Print time: 9h– 11h

Material: PLA
Print direction: check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Outer walls: 5 – necessary for stability
Infill: 30%
If you experience any problems, please feel free to contact me on twitter or Instagram

Teardrop Lamp

Teardrop Lamp.stl

Hanging pots tube

hanging pots spiked tube.stl

Basketweave Lamp

Basketweave Lamp.3mf

Truncated Cube Tealight Holder

This design is part of a set of Tealight Holders derived from mathematical surfaces and lattices. 

The Tealights will print without supports, but you may want to ensure your machine is well calibrated for bridging and that you are getting good layer adhesion.

See here for video: https://youtu.be/ApTyuPGk7EQ


Tructated Cube Tealight

Nespresso Vertuo Pod Holder

Nespresso Vertuo Pod holder/rails. They are keyed to connect together. Can be mounted vertically or horizontally. The image shown is horizontally mounted on the underside of a wall cabinet - hidden from view. Pods are easily slid in and out of the holder/rails.

I printed with supports for the small overhang that the pods slide into.

_Licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license._

A-Frame Cabin Lamp - No Supports, No AMS - Christmas Day 13 - Light - Lighting

a-frame-cabin.stl

Mini Lamp F023 by UMINO

MF023BASE.stl

WABI | Self-watering Planter

WABI-Planter_Pot.STL

Ultimate Screwdriver (an overly engineered gag gift)

Ultimate Screwdriver - Display Only Do Not Print.stl

Mini Lamp F013 by UMINO

MF013BASE.stl

Pendant Lamp 005 by UMINO

P005SHADE.stl

Festool/Tanos SYS3 Systainer Attic Bit Holder

sys3 attic bit insert v2.STL

Multicolor Table Lamp

multi color bloom- One pice.stl

Home & garden

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Mini Lamp F026 by UMINO

Drain Strainer 40mm

Candy Cane Egg

Tulip Vase

PINCH | Watering Can

Self-Orienting Ratchet Socket Wrench

Knife block

Teardrop Lamp

Hanging pots tube

Basketweave Lamp

Truncated Cube Tealight Holder

Nespresso Vertuo Pod Holder

A-Frame Cabin Lamp - No Supports, No AMS - Christmas Day 13 - Light - Lighting

Mini Lamp F023 by UMINO

WABI | Self-watering Planter

Ultimate Screwdriver (an overly engineered gag gift)

Mini Lamp F013 by UMINO

Pendant Lamp 005 by UMINO

Festool/Tanos SYS3 Systainer Attic Bit Holder

Multicolor Table Lamp