Chest Freezer Drain Plug

Every time we had to defrost our chest freezer,  we would find that the plug somehow became inverted leaving us with nothing to grab on to to remove it.  This model has large chamfers around the top side making it harder for the plug to remain stable in the hole when inverted.  Attentionally, a small inset handle is included on the bottom side in case it does manage to flip.

No supports are needed while printing.  I printed with 100% infill to improve strength incase a frozen turkey gets dropped on it while installed or something.

This model is distributed under CC BY-SA 4.0

Blinds End Replacement

Toilet plate

Toilet plate MAN .stl

Cottage planter

hello friends, this is my new 3d model, it is a unique shape flower pot, hope you like it.

Gridfinity Small Plier Holder

This tool holder has a gridfinity base that was created to hold small pliers.

Simple Rod mount 3D model

This shower curtain rod holder is a solution to bathroom curtain holders that keep falling; the design includes simple rods that are meant to be glued to the wall with double-sided tape.

The print settings for the shower curtain rod holder include: a Creality Ender-3 v2 printer, no rafts or supports, a resolution of 0.2, an infill of 35, and PLA material for the filament.

Based on [this](https://www.thingiverse.com/thing:6088755) model from lithium366. Slightly modified, added some texture with the help of this tutorial on [Blender displacement maps](https://hum3d.com/blog/displacement-maps-in-blender-tutorial/). 

Please feel free to leave comments. I would be grateful for the likes, I hope it will be useful to someone.

Simple Rod mount 

dewalt_gyro_screwdriver_bit_holder.stl

This attachment is the replacement of the original dewalt gyro screwdriver bit holder.
I lost mine so designed this one.
 This has at least 3 advantages:
1. attached on the butom side of the driver
2. holds 3 bits
3. more sturdy and holds well

Desktop Hammock

Hammock.stl

IKEA PAX ÖVERSIDAN light sensor cover

ÖVERSIDAN wardrobe light strip has a sensor that switches the light on and off automatically when you open or close the door. It also has a switch but it's a really tinny one and it's not comfortably placed for frequent use.

I keep my 3D printer in a PAX rack with these light strips and I like to have the door open when I'm printing. I created this part to easily turn off the light for long prints.

Lamp shade.3mf

 3D model of a Lamp Shade. Featuring an intricate pattern, this digital lamp shade communicates a captivating radiation of light, enhancing a room's aesthetics splendidly. Meant to be used primarily for lamps with excellent rigidity and heat resistance, the model can be reproduced using a 3D printer and various materials. Characterized by its perfect combination of symmetry and uniqueness, it is ideal for anyone wanting to add a little flair to their interior design. Users can also modify the size according to their requirement adding to its versatility. Its design is not only functional but also provides an opportunity to create a unique lighting atmosphere in your home, office or any desired setting. Please note that this model needs to be printed with a material suitable for high temperatures underneath the bulb.

Elephant Succulent Planter

Elephant Planter.stl

staket_top.stl

fence cap 100*25 mm inside
I printed in asa

Space Nebular Desk Lamp

Greetings!

I'm excited to present you with my Space Nebular Desk Lamp. This unique piece is sure to add a celestial glow to your workspace.

Here's what you'll need to assemble this lamp: a lamp socket and a bulb. I personally prefer a multicolored LED bulb, but the choice is yours. Please note, however, that the components are compatible only with a specific Lamp Socket available on eBay.

EU Version:

EU Plug: https://ebay.us/ASMco5

EU Bulb: https://ebay.us/yB4Acp

US Version:

US Plug: https://ebay.us/yHsc2c

US Bulb: https://ebay.us/oTWuS1

Support my work by purchasing through these links!

On to the print settings:
For this project, you only need to print the files which are numerically labelled.

Space Nebular: Opt for a 0.4 mm nozzle. Alternatively, set your print to a line height of 0.2 mm and a width of 0.4 mm. Be aware that the domes can be challenging to print. I recommend reducing the print speed to 50% when you reach layer 670. Use 100% infill with concentric infill, or adjust your wall count to a high figure, such as 40. For material, any basic white PLA should suffice. I've found that Sunlu White PLA+ gives great results. Please steer clear of matte or glitter materials as they won't produce the desired effect. The good news is, you won't need any supports!

Holder: Unlike the Space Nebular part, you'll need to print the holder with supports.

Voila! Your Space Nebular Desk Lamp is ready to brighten up your space. If you've enjoyed creating this lamp, please consider supporting my filament needs by buying me a coffee at https://www.buymeacoffee.com/Ri0m0. As a student, every bit of support helps!

In addition to this, you'll find more lamp designs on my profile, and there are more on the way! Feel free to reach out if you encounter any difficulties or if you have any suggestions.

Please keep in mind that this design is intended for non-commercial use only.

Enjoy lighting up your workspace with your very own Space Nebular Desk Lamp!

Decanter Bowl 

Vase mode bowl print. #FuntionalArt

Creative Commons License 4.0 BY-NC-ND

Watering Can.stl

The spout does not require supports but the handle will. I could not get the handle to print correctly without a raft 

Vacuum Cleaner Narrow Part

Vacuum.STL

Cute Planter Leno

Hey,
this is Leno. Leno will take good care of your plants.

Print with supports.

Leno Has 3 friends:
https://thangs.com/designer/Ri0m0/3d-model/Cute%20Planter%20Timo-903403?manualModelView=true&source=All+Files

https://thangs.com/designer/Ri0m0/3d-model/Cute%20Planter%20Tim-903405?manualModelView=true&source=All+Files

https://thangs.com/designer/Ri0m0/3d-model/Cute%20Planter%20Lina-903404?manualModelView=true&source=All+Files

desktop organizer/planter

S.stl

Light diffuser for kingroon led 3D printer light.

https://www.amazon.com/Printer-Light-Upgrade-Creality-

This is a light diffuser I created that clips over the Kingroon led light strip.

**Printed in: ** 
Matte white pla 
Supports  on
Brim on 
20%infill
open section facing downwards 


Ender/dp/B0B44P5SFP/ref=sr_1_3?crid=2EZB5Z03YL932&keywords=kingroon+led+light&qid=1689126276&sprefix=kingroon+led+light%2Caps%2C141&sr=8-3

Home & Garden

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Chest Freezer Drain Plug

Blinds End Replacement

Toilet plate

Cottage planter

View 12 new models

Simple Rod mount 3D model

dewalt_gyro_screwdriver_bit_holder.stl

Desktop Hammock

IKEA PAX ÖVERSIDAN light sensor cover

Lamp shade.3mf

Elephant Succulent Planter

staket_top.stl

Space Nebular Desk Lamp

Decanter Bowl

Watering Can.stl

Vacuum Cleaner Narrow Part

View 11 new models

desktop organizer/planter

Light diffuser for kingroon led 3D printer light.

Protopasta Lamp base + DIY customizable shade