Happy Halloween Tabletop Decoration with Moon

Simple Happy Halloween table top decoration featuring a cat, spider, and bat on a spooky tree with a harvest moon background.

Designed for color swaps to spice it up if desired.

Sample printed in Printed Solid Yellow Bird PLA, Hatchbox Black PLA & PolyMaker Purple Silk PLA.

Happy Halloween Decoration with Moon

Pumpkin Vase

A Pumpkin Vase for Halloween that can be printed in Vase Mode.

I hope you enjoy.

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

https://www.buymeacoffee.com/bugman140

Cathedral Christmas Tree Topper 2024

Topper Cathedral Whole.stl

Christmas Tree (LED Lamp or Decoration)

model294.stl

Standalone Decoration (with infill) - Blue Plastic

Standalone Decoration (with infill) - Gray Plastic

Standalone Decoration (with infill) - Green Plastic

Standalone Decoration (with infill) - Orange Plastic

Standalone Decoration (with infill) - Red Plastic

Standalone Decoration (with infill) - White Plastic

Standalone Decoration (with infill) - Yellow Plastic

Standalone Decoration (with infill)- Black Plastic

Christmas Mickey Mouse Sculpture - Festive Art

Mickey_Christmas.stl

Spiral Christmas Finial 2024

Finial Spiral Whole.stl

Christmas Ornament Hollow Slices

4.5 Inch Ornament Slices.3mf

Flying Christmas Ghost – Halloween meets Christmas

GHOST.stl

Festive Santa Penguin Figurine for Christmas Decor

Penguin with gift_.3mf

Christmas ball ornament

christmas ball ornament.stl

Valentines Heart Bowl

This heart-shaped candy bowl sits on top of a matrix of separate but intertwined chiral channels of the Laves Graph. 

Maybe you and your loved one are like intertwined chiral channels?

The channels are approximately 2mm in diameter, which is as small as you’d want to go with a 0.8 mm nozzle. The example in the picture above is printed with a 0.8mm nozzle, and up close you can see a few imperfections. If you like this size, I suggest using a smaller nozzle. If you want to use a 0.8mm nozzle, I suggested scaling up a bit.


FLOWTREE – Light-Up Christmas Tree

Lampshade_for Led Lamp Kit 001.3mf

R2D2 Christmas Tree Decoration

R2D2 Christmas Ornament Frikarte3D.stl

Stormtrooper Christmas Tree Decoration

This is an Stormtrooper Helmet Christmas Tree Decoration.
It's designed to be printed in different color changes to achieve the final result, if you want you can print it in one color and paint later.
This is the filament color change configuration if you print with 0.2mm layer:
0 to layer 13 (0 to 2.6mm) = White
14 to 17 (2.8 to 3.4mm) = Black
18 to 21 (3.6 to 4.2mm) = Red

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [Frikarte3D](https://www.instagram.com/frikarte3d/)

PKE Meter Christmas Ornament

PKE Meter Ornamnet .3mf

Realistic Rose

long stem without leaves.stl

LUNARI Easter Bunny Ornament I Origami Bunny I Hanging Bunny STL

LUNARI easter bunny.3mf

Closed Spiral Christmas Ornament

**ABOUT THE DESIGN**
This is a new variation on my Christmas Balls with Integrated Stems.

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**RESIZING**
These should scale up well, but I'm not sure how much smaller you could print them using a consumer FDM printer. Using a resin printer, you could probably print them much smaller.

**PRINT TIME**
About 4 hours.

**PRINT SETTINGS**
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height. I printed at 200 C with 115% flow.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 mm. 

*Infill*
This does not need any infill. JUST DON'T DO IT – especialy if you print it with transparent filament.

*Speed*
* Outer Wall: 20 mm/sec
* Top/Bottom Speed: 20 mm/sec
* Travel Speed: 50 mm/sec

*Build Plate Adhesion*
I relied on the supports for build plate adhesion. 

*Supports*
I first printed with used normal supports and an overhang angle of 67 degrees and no other supports. It worked until 2 minutes from completion, when the model came loose from the bed. When I tried again, I with an overhang angle of 64 degrees and added 8 custom supports that keep the model from wobbling. I've included a screenshot from Cura of the supports. 

I added a support blocker in the loop to keep from having supports added inside the loop.

Christmas Teardrop Ornament 1

Use this version if you plan to create your own supports. I recommend trying the version with built-in supports first.

Holidays & Seasonal Events

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Happy Halloween Tabletop Decoration with Moon

Pumpkin Vase

Cathedral Christmas Tree Topper 2024

Christmas Tree (LED Lamp or Decoration)

Christmas Mickey Mouse Sculpture - Festive Art

Spiral Christmas Finial 2024

Christmas Ornament Hollow Slices

Flying Christmas Ghost – Halloween meets Christmas

Festive Santa Penguin Figurine for Christmas Decor

Christmas ball ornament

Valentines Heart Bowl

FLOWTREE – Light-Up Christmas Tree

R2D2 Christmas Tree Decoration

Stormtrooper Christmas Tree Decoration

PKE Meter Christmas Ornament

Realistic Rose

LUNARI Easter Bunny Ornament I Origami Bunny I Hanging Bunny STL

Closed Spiral Christmas Ornament

Christmas Teardrop Ornament 1

Funny Gift Box Figurine – Playful Christmas Decor