Elf (Little Big Head)

LBH-Elf.stl

Closed Lattice Christmas Bell

This is the third in this year's Christmas bell series. It prints quickly ad easily. Use a nice medium toned silky, metallic or multicolored filament to show off the geometry - or use translucent filament to make it glow.

This is based on my spiral and open lattice bells. It's roughly the same size (slightly taller) with a new loop at the top and a new lattice pattern. 

###Not to be Sold
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

*** PRINT SETTINGS***
* Walls: 0.4 - 0.8 mm (I used 0.4 mm for the clear bell and added an alternating extra line for the opaque bell)
* Layer Thickness: 0.15 mm recommended. Anything from 0.1 - 0.2 mm should look good.
* Infill: None. Seriously. It doesn't need it. It just adds weight and print time.
* Rafts/Brim: I didn't use either. However, the first layer is just a single width circle, so you may need to add a brim or raft.
* Supports: None. I designed this to print cleanly without them.

Remix of Frosty The Snowman REMIX CONTEST

DISPLAY ONLY REMIXFROSTY.stl

Articulated Frosty The Snowman 

Diamond Gem Snowflake Ornament

RetroMaker Diamond Gem Snowflake Ornament. Hang on your tree, hang on your window, hang anywhere you want to bring the retro snowflake vibe.


Easy Print-in-place.

Creative Commons License BY-NC-ND 4.0

Spiral Christmas Ornament

top half.stl

Frosty's Cup of Remixing

Gift Box

Screw part ribbon.stl

Yeah, Another christmas Ball

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**ABOUT THE DESIGN**
Yep, this is yet another variation on my Christmas Balls with Integrated Stems. You can't keep a good designer down. There's no photo because my prototype is still printing. Still, it's 80% done and the rest is identical to other prints I;'ve published, so I already know it should work. Give it a try. It's relatively easy to print. 

**RESIZING**
This ornament should scale up well, but I'm not sure how much smaller you could print it using a consumer FDM printer. Using a resin printer, you could probably print it much smaller.

**PRINT TIME**
About 6 hours

**PRINT SETTINGS**
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 – 0.8 mm.

I had the best results using Cura setting the default width to 0.4 mm and adding custom settings for the main ball that printed it 0.8 mm thick. You can do this by adding a support blocker to the bottom and giving it custom settings of 0.4 mm. Cura adds the two and prints the area within the blocker at 0.8 mm.

*Infill*
These do not need any infill. JUST DON'T DO IT.

*Speed*
* Outer Wall: 35 mm/sec
* Inner Wall: 40 mm/sec
* Travel SpeeD: 60 mm/sec

*Build Plate Adhesion*
I used a brim. With the supports, you shouldn't need a raft.

*Supports*
You will probably need supports for both bed adhesion and the overhang on the first few layers. You shouldn't need supports for the loop at the top. Adding them would just increase the chances the supports broke and caused the print to fail. If you get supports inside the ball, just add a support blocker.

* Support Structure: Normal
* Support Placement: Touching Buildplate
* Support Overhang Angle: 60 Degrees

Kaleidoscope Christmas Balls with Stems

2022 kaleidoscope ball 2.stl

Santas sleigh napkin holder

Cookie box Gingerbread 

box.stl

Merry Christmas Hanger

Baby Yoda Christmas Tree Decoration Upgraded

This an upgraded version of the [Baby Yoda Christmas Tree Ornament](https://thangs.com/mythangs/file/547312).
It's designed to be printed in different color changes to achieve the final result, if you want you can print it in one color and paint later.
This is the filament color change configuration if you print with 0.2mm layer:
0 to layer 5 (0 to 1mm) = Brown
6 to 9 (1.2 to 1.8mm) = Green
10 to 13 (2 to 2.6mm) = Black
14 to 17 (2.8 to 3.4mm) = White
18 to 21 (3.6 to 4.2mm) = Red

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [Frikarte3D](https://www.instagram.com/frikarte3d/)

Baby Yoda Christmas Tree Ornament v2

krampus2.stl

6" tall Krampus with hallowed out bottom for use as a holiday tree topper.

Frosty The Snowman REMIX CONTEST

Angel bell

CHECK ENGINE Tree Topper

Scale to fit your tree
You can see how i made it here https://youtu.be/RXbWhotSBd4

My, What A Fancy Bell You Have

Holiday

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Elf (Little Big Head)

Closed Lattice Christmas Bell

Remix of Frosty The Snowman REMIX CONTEST

Articulated Frosty The Snowman

Diamond Gem Snowflake Ornament

Spiral Christmas Ornament

Frosty's Cup of Remixing

Gift Box

Yeah, Another christmas Ball

Kaleidoscope Christmas Balls with Stems

Santas sleigh napkin holder

Cookie box Gingerbread

Merry Christmas Hanger

Baby Yoda Christmas Tree Decoration Upgraded

Remix of Frosty The Snowman REMIX CONTEST

krampus2.stl

View 10 new models

Angel bell

CHECK ENGINE Tree Topper

My, What A Fancy Bell You Have