Coaster Keeper - Star Cutout

Starry Candle

Starry Candle is a minimalist candle holder that plays with light and shadow to reflect the shape of a star on the table.

Use this Christmas decoration to set the mood with its lights, as a centrepiece for your Christmas dinners or as a home decoration.

The ideal candles to achieve the maximum shadow effect are the elongated ones, which can be nailed directly to the base, as it has a small spike, or use the tube that is attached to the base to insert the candle. You can also use small candles to achieve a different effect, which are nailed directly to the base.

**3D PRINTING PARAMETERS**
The following configurations are recommended for printing:

No need to use support
Filling of 20%.
Layer height 0.15 mm or less
Bottom layers: 5
Top layers: 3
Wall line count: 7
Recommended to print in matt filament. You can print the candle holder and support tube in different colours to create different combinations.

ATG Stand

Created this little stand for the Scotch Advanced Tape Glider (ATG).  Affectionately known to the Scrap-booking community as the ATG Gun. This has a small footprint so as to not take up precious space on a Scrapbookers desk.  The ATG rests neatly inside for quick retrieval and storage. 

RepRack Stabilizing End Caps

**RepRack Stabilizing End Caps**
These end caps help stabilize side-to-side movement of your RepRack spool storage, no need to use Rod Clamps.  These end caps provide a nice finished look to your RepRacks.  Designed to fit snug on your ½" EMT Conduit.

**My Print Settings:**
0.3mm (any Layer Height works, these are not structural components)
NO Supports required
Print in any color, any flavor


Wavy Can Coozie

This is the **Waves** style of my [Cool Can Coozies Collection](https://www.myminifactory.com/object/3d-print-179334) so you can try before you buy the full set!

---

Keep your drinks cool and your hands cozy with this stylish Cool Can Coozie! Great for identifying drinks at a party, and eliminates the need for coasters! Scale to whatever size to make fun containers as well.

The STL models are solid, designed to be printed in vase mode extruded with a 1mm extrusion width (works with a 0.4 mm nozzle or higher) and no top layers.

The fit is extremely precise so the can floats down. It's super satisfying!

...that said, some cans with paper labels become a tight fit, so you may want to scale up the model a fraction of a percentage (100.25% or so) for more compatibility. The fit will also depend a lot on your 3D printers accuracy and the actual extrusion width.

---

**Print settings:**

- vase mode/spiralize
- 1mm extrusion width
- 0.12-0.25mm layer height
- 0 top layers, 4-8 bottom layers

Cable Hook

Small Low Poly Pumpkin

Small Pumpkin.obj

simple Key bowl.stl

Simple Key bowl - I would print in wood filament however I have run out yet have more on the way.

It has a simple chamfer along the edges and a small divot for keys or other bits.
 

Gothic Style Tealight Topper/Decor

**Free downloads through August 18th!**

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.
***
***Sculpt by @ChelsC423***
Sized to sit on top of a standard tealight candle.

Headset and controller holder

headset  holder.stl

Twisted Vase

Just a vase with a cool twisty pattern.

Print Settings:
DO NOT use vase mode
.1 - .2 mm layerheight
no supports
the model is scalable to any size you want to print it at

wooden rack | connecting pieces

connector top corner.stl

SwatchGRID - 20mm Calibration Cube Holder

20mm cubes make a nice color/material swatch,  Not a lot of room to write what they are, but just enough for me. This grid holds them securely, with holes in case some of your cubes don't want to leave home.

K2 ClipSticks Holder

Chopstick Rest/Holder - infamous K2 Clip Remix!

Chopsticks have always been accompanied by an unassuming, but very essential tool: the hashi-oki (chopstick rest), which is sometimes also referred to as a hashi-makura, or chopstick pillow.

This Chopstick rest is remixed from the infamous meme of amazement…  The K2 Filament Clip.  If you look close enough, you will also find something many of you already have too many of, hidden dragons.

Glass / Mirror Bracket

A small bracket to hold a piece of glass, a mirror or piece of wood to a wall using a corner. Accepts most screws

USB_SD_Card_Organizer_PrintStart3D.stl

Holds 8 SD cards, 4 usb, and whatever else fits!

Cloud Dock Nintendo Switch Lite

Here's the cloud dock dedicated to Switch Lite.

The insert has been carefully tailored for the Switch Lite form factor.

The dock is well-balanced and won't be knocked over easily.

There is a convenient cable holder at the back, and when you pop the cable, there's a satisfying "click" sound. (The cable holder will hold the official Nintendo USB-C cable that comes with the Switch Lite - diameter 0.4cm) 

• No support!

• Layer Height 0.2mm

• Nozzle 0.4mm

• Recommended infill 15% with a Gyroid or Cubic infill.

• Seam placed behind.

Best to all of you!

Hand Controller Stand MK.II by Holoprops

The Controller Stand MK.II for PS5 | PS4 | Xbox Series X and S | Xbox One X and S | Nintendo Switch Controller Pro

This awesome stand will hold your mighty controller with commitment. Your favourite pad deserves such greatness !
Perfect for your Playstation 5 or 4 and Xbox One, and Series controllers.

Step up your game and add this unique item next to your console or PC!

Hand Controller Stand MK.II

Sony Battery Holder x6 (NP-FW50)

Holds 6 Sony Batteries, simple push-in / push-out. I tried to make this super fast release, since we all know these batteries don't last long.

NOTE: Works with Sony A7,A7II and other Sony products that use the **NP-FW50** Battery.

**PRINT SETTINGS:**
0.2mm height
No Supports required

REMIX of my 4 Battery Holder: https://thangs.com/mythangs/file/915570

Holder

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 10 new models

View 21 new models

ATG Stand

RepRack Stabilizing End Caps

View 111 new models

Cable Hook

Small Low Poly Pumpkin

simple Key bowl.stl

View 10 new models

Headset and controller holder

Twisted Vase

wooden rack | connecting pieces

SwatchGRID - 20mm Calibration Cube Holder

K2 ClipSticks Holder

Glass / Mirror Bracket

USB_SD_Card_Organizer_PrintStart3D.stl

Cloud Dock Nintendo Switch Lite

Hand Controller Stand MK.II by Holoprops

View 14 new models

View 72 new models