Hal The Christmas Jalapeno Ornament - Print In Place

Hal the JalapenoChristmas.stl

christmas ornament earrings pack christmas ornaments jewelry pack 

ornament ball pack earrings.stl

Solstice Hanging Sign

This is a sign to hang in the middle of your seasonal wreath to wish people a Happy Solstice and Merry Yule.

Parametric Hanging Clip

hanging_clip_20x20_1mm.stl

EZPZ Pegboard Hook // 10mm Hook Type B

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 10mm depth and a shallow angle. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Hanging Cat Ornament

A cat climbing the windowblinds

Print at 0.3mm layer height

If using Bambu Studio set the wall generator to Arachne

If using Cura make sure 'print thin walls' is checked.

Print the first 4 layers in white then swap to black for the rest of the print

EZPZ Pegboard Hook // 25mm Reinforced Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 25mm depth and a reinforcing strut along the bottom, which takes up a bit more space in exchange for greater strength. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Tippi Fruit Ornament Conversion Stem

Turn your [Tippi Tree](https://than.gs/m/933018) Fruits, Berries, and more into standard ornaments with this alternate stem. Feed a string or wire through the 2mm hole and it's good to go. Also great for making necklaces, earrings, car ornaments, and whatever else you can dream up!

Easy print, no supports required. 2-3 shells, 11% infill, 0.16mm layer height, or whatever suits your use.

Tippi Fruit Ornament Conversion

Wyze Cam V1/V2 Outdoor Camera Housing

botmount-bot-nolens-v3.stl

Packing Tape Dispenser Holder // Peg Anything

packtapeholder-stronger.stl

Halloween Snap Together Garland Decorations

Jack-O-Lantern.stl

Rhombic Triacontahedron Spore // Folding Polypanel Pack No.1

Rhombic Triacontahedron Rhombictriacontahedron. _Rhombic Triacontahedron Rhombictriacontahedron._ **Rhombic Triacontahedron Rhombictriacontahedron** ... say that three times fast!

Don't worry, this awesome shape is way easier to print than it is to pronounce. It prints flat and then folds and snaps into place. Super cool!


This is a freebie from my [Folding Polyhedra Pack No.1](https://www.myminifactory.com/object/3d-print-folding-polyhedra-pack-no-1-81865)

Rhombic Triacontahedron Rhombictriacontahedron Spore // Folding Polypanel Pack No.1

Peg Anything // Tough Large Hook

l-hook-sturdy.stl

HANGING AXOLOTL PLANTER #FunctionalArt

HeadSTL.stl

Make Light, Not War Bomb Light #FunctionalArt

whole bomb light.stl

Ceiling Spool Holder

Hey,
I ran out of space, that's why I made a spool holder that can be hung from the ceiling.
You could theoretically just use a rope but i was worried the rope might wear out so i overengineered it xD
You need rope and optionally skateboard bearings.
Assemble like in the pictures.
If you don't use bearings, just print the Role that should do the job just fine.
I tied little rings to the ends of my rope to make it easy to disassemble, You could certainly print these, but I used some I had flying around.

D' Bomb Hanging IKEA light! Turn your room or space into the BOMB

Hanging Planter

**A creative hanging planter for your home or garden.**

**What you need:**
- The 3d printed thing
- Yarn with about 3mm in diameter (can be flax, hemp, whatever)

The assembly instructions are in the images.

Size: 90 × 80 × 170 mm
Don't forget to post your makes!

**Print settings**
Required build volume: 90 x 90 x 180 mm
Material usage: 110g
Print time: 10h

Material: PLA
Print direction: stl is rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm – 0.28 mm
Outer walls: 3
Infill: 15%
Build plate adhesion type: brim

Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.

If you experience any problems, please feel free to contact me on twitter or Instagram

Fridge Magnet Hook - Captive Magnets

A hook with a captive magnet design. Inside this model there are 2 holes for 6x3mm magnets.  During the slicing process you can add a pause at the top layer of the internal magnet container and insert the magnets. After this, the printer will continue to print across the top of the magnets to hide them inside the model.

Hanging

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Hal The Christmas Jalapeno Ornament - Print In Place

View 41 new models

Solstice Hanging Sign

Parametric Hanging Clip

EZPZ Pegboard Hook // 10mm Hook Type B

Hanging Cat Ornament

View 17 new models

View 16 new models

View 78 new models

View 18 new models

View 13 new models

View 20 new models

View 111 new models

HANGING AXOLOTL PLANTER #FunctionalArt

Make Light, Not War Bomb Light #FunctionalArt

View 11 new models

D' Bomb Hanging IKEA light! Turn your room or space into the BOMB

View 31 new models

Fridge Magnet Hook - Captive Magnets

Acorn - Screw It Yourself