Get commercial license and download newest models cheaply- https://www.patreon.com/goodesign

The previously made excavator has gained great popularity from customers. So I wanted to design more heavy equipment, so I designed the skid loader this time. Again, all movements have been reproduced.

The making process is as follows.

Fold the lower body and fit the tire.
Sliding the engine through it, then inserting it into the cockpit.
Glue the grate windows.
Pull the cylinder of the lift arm until it clicks into place.
Rotate the piston and fit it into the lift arm. And put this piston in the cylinder.
Connect the safety tread between the lift arms.
Connect the bucket to the lift arm.
Connect the lower body to the lift arm and connect the cockpit + engine parts to complete.
https://youtu.be/UbvlE84jyaQ

We hope you love this skid loader a lot, and look forward to the heavy equipment that will be introduced in the future!

1: 35 Scale

Largest part in printing, size = X 42mm, Y 102mm, Z 24mm, After full assembly size= X 52mm, Y 100mm, Z 57mm

Skid loader (Print-in-place Articulated)

GOODesign_Cockpit.stl

Heavy equipment is a favorite item for everyone, both adults and children. I wanted to make it print-in-place articulated for a long time, but the structure didn't come to my mind. As my design experience gained, I was finally able to make one of them, an excavator.

The print-in-place articulated method was applied, but it did not reduce the number of parts much. However, the structure of all moving parts was realized without missing. And since I paid attention to color division, you can enjoy a nice look after finishing it.

This design can be divided into three main parts (arm, upper body, and mobile/car body).

Of these, pay attention to the process of making the arm.

The process of building an arm is as follows.

First, pull the bucket cylinder to the top and insert it into the hole so that it can rotate.

Insert the piston into the arm cylinder on the back, and turn the piston into a place where the front arm (Stick) can be connected.

Insert the bucket by connecting it to the hole inside the bucket at the end of the front stick. At this time, do not confuse the connecting hole.

Insert the H-link into the front cylinder of the piston. And connect the H shape of the H-link to the bucket. Now, just insert the outer part of the H-link into the hole in the front arm (Stick).

Put the arm made in this way into the upper body arm (Boom). If the arm comes off well, attach it with adhesive or glue.

Please make sure to watch the video first for this process.

https://youtu.be/yLjKCgVMMNk
https://youtu.be/i9EgiMu7vBQ
https://youtu.be/d761aAZzRSk

I'm thinking of making other heavy machinery as well, but applying the Print-in-place Articulated method takes a lot of thought. However, I am planning to make it one by one. We look forward to your expectations.

1: 48 Scale

Largest part in printing, size = X 14mm, Y 128mm, Z 45mm, After full assembly size= X 82mm, Y 258mm, Z 74mm

Excavator (Print-in-Place articulated)

GOODesign_Body.stl

Get commercial license and download newest models cheaply- https://www.patreon.com/goodesign
The Falcon 9 rocket and dragon capsule are successfully launched and in operation. Perhaps that's why the previously made Falcon 9 rocket and Dragon Capsule models were also very popular. And there was a request to continuously produce Falcon heavy.
However, Falcon Heavy is a very large project and I was hesitant because it was a time-consuming task. However, it started to be produced at the constant request of customers, and it was finally completed.

Second stage and fairing are not included.
Second stage link - https://than.gs/m/1318677

Fairing link - https://than.gs/m/1299069

The composition of the parts is as follows.
X2 means you need 2 sets, X12 means you need 12 sets. So, you need to print as many more as you need.
Inter Stage Min
Inter Stage Side x2
Inter Stage Hinge x2
Side Cable Main
Side Cable Side x2
FH Main
FH Side x2
SpaceX Side
SpaceX Side x2
Middle Main
Middle Side x2
Bottom Main
Bottom Side x2
Booster Main
Booster Side x2
Landing Leg Bar x12
Landing Leg x12

If you've ever built a Falcon 9 rocket, it's easy to do.
Please check the video for the assembly process.

https://youtu.be/DfAIVl9LiVo

Scale 1 : 66
Size when finished, X 233mm, Y 81mm, Z Fairing 1058mm, Second Stage 936mm, Heavy 730mm

HEAVY

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Skid loader (Print-in-place Articulated)

Excavator (Print-in-Place articulated)

SpaceX Falcon heavy