Icosahedron Pyramids // Folding Polyhedra Pack No.1

folding-polyhedra-pack-03-icosahedron-icosahedron-pyramids.stl

EZPZ Headphone Hanger (Under Desk)

EZPZ_UnderDeskHeadphoneHanger_4mmFlatHead.stl

Hook for Gymnastics Rings

32mm_ringHook.stl

 Holiday Hangers: Santa, Snowman & Reindeer Trio

santatree.stl

EZPZ Pegboard Hook // 20mm Reinforced Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 20mm depth and a reinforcing strut along the bottom, which takes up a bit more space in exchange for greater strength. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Rhombic Triacontahedron Spore // Folding Polypanel Pack No.1

Rhombic Triacontahedron Rhombictriacontahedron. _Rhombic Triacontahedron Rhombictriacontahedron._ **Rhombic Triacontahedron Rhombictriacontahedron** ... say that three times fast!

Don't worry, this awesome shape is way easier to print than it is to pronounce. It prints flat and then folds and snaps into place. Super cool!


This is a freebie from my [Folding Polyhedra Pack No.1](https://www.myminifactory.com/object/3d-print-folding-polyhedra-pack-no-1-81865)

Rhombic Triacontahedron Rhombictriacontahedron Spore // Folding Polypanel Pack No.1

35 Snowflakes

f1.stl

spring flower wall art garden flowers home decor

spring flowers.stl

Adhesive Wall Hook Type 2

Adhesive Wall Hook Type 2 Hook Cover_STL.stl

EZPZ Pegboard Hook // 15mm Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 15mm depth. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Planter Tower Vase Mode !!!

planter_swing.stl

Banana lamp

Banana_lamp_D.stl

EZPZ Pegboard Hook // 20mm Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 20mm depth. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

EZPZ Pegboard Hook // 25mm Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 25mm depth. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

EZPZ Keychain Loop // 20mm Ring

Loop_20mmID_Ring.stl

HELIX  |  Pendant Light E27 & E26 fast print

HELIX_pendant-light_V1_Shade-Large.stl

Picture Frame Hanging Hook

picture_hook_2.stl

Xbox controller mount

controller stand laying down.stl

Tough Little Hook // Peg Anything

I made stronger hooks that use two pegs to prevent rotation. At 100% infill these little suckers can hold a fair amount of weight!

Made for standard pegboard with 1/4" holes spaced 1" apart. Photographed model printed with [MatterHacker White PRO Series PLA](https://bit.ly/PRO-PLA)

EZPZ Pegboard Hook // 10mm Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 10mm depth. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

HANGING

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Icosahedron Pyramids // Folding Polyhedra Pack No.1

EZPZ Headphone Hanger (Under Desk)

Hook for Gymnastics Rings

Holiday Hangers: Santa, Snowman & Reindeer Trio

EZPZ Pegboard Hook // 20mm Reinforced Hook

Rhombic Triacontahedron Spore // Folding Polypanel Pack No.1

35 Snowflakes

spring flower wall art garden flowers home decor

Adhesive Wall Hook Type 2

EZPZ Pegboard Hook // 15mm Hook

Planter Tower Vase Mode !!!

Banana lamp

EZPZ Pegboard Hook // 20mm Hook

EZPZ Pegboard Hook // 25mm Hook

EZPZ Keychain Loop // 20mm Ring

HELIX | Pendant Light E27 & E26 fast print

Picture Frame Hanging Hook

Xbox controller mount

Tough Little Hook // Peg Anything

EZPZ Pegboard Hook // 10mm Hook