Gate - Enviroment Prop - Court of Anubis -  PRESUPPORTED - Illustrated and Stats - 32mm scale

Gate - Base.stl

Donut Factory Puzzle // 2x2 Twisty Marble Puzzle (24mm & 35mm inner cube)

What's better than a donut? SIX donuts!

---

There's a lot going on in the Donut Factory. Twisting, spinning, snapping... the feel is satisfying, but trying to solve this tricky puzzle might leave you frustrated!

---

**_Assembly_**

This puzzle is built around a tiny [24mm 2x2x2 puzzle cube](https://speedcubeshop.com/products/eastsheen-mini-2x2-keychain-cube?variant=40210339659889). You will have to remove the keychain part.

Print 8 copies of the included STL. No supports are required, but the overhangs may warp a bit on some printers, so you may want to include a wide brim and increase Z-retraction height for travel moves in your slicer settings.

After printing, use flush cutters to remove the brim and flat bottom.

Magnets are optional, but highly recommended since they improve the puzzle action and make assembly easier as well. You will need 48 3mm x 6mm neodymium magnets. I used E6000 adhesive to glue them into place. Each face has 2 magnets. Make sure the left holes all have the same polarity, and the right holes all have the opposite polarity. Also make sure the magnets are flush to the face. It can help to use the corner of a table or some tool to press the magnets into place. Allow the glue to dry before moving forward.

Next, glue 7 of the 8 sections onto the internal 2x2 cube. Use only enough adhesive to connect the print to the corner of a cube. If too much glue smushes out, your puzzle may not rotate!

Once the 7 parts are in place, load up the marbles. This puzzle was designed for use with these 14mm ABS no hole beads (true dimensions closer to 13.6mm). The easier way to add the marbles is to rotate individual halves 22.5 degrees so the tracks form an S-bend, so you can add all the marbles of one color (8 marbles per ring). Watching my assembly video might make this easier to understand!

After loading the 3 rings opposite of the missing piece, fill the top rings, including the final corner, and then glue that into place. 

The magnets will help hold the parts together while drying, but I like using [0.25" x 4" Grifiti Silicone Bands](https://amzn.to/45QcKz6) to compress the parts as well.

Donut Factory Puzzle // 2x2x2 Twisty Marble Puzzle (24mm inner cube)

PlayBook'd Settlers' Storage

PlayBook'd Settlers' Storage.3mf

Domino Holder 

domino.step

Marble Racer Singles Base Set

Spiral Left turn Half.stl

Gibbering Mouther

Gibbering_Mouther.3mf

Druid - With Free Dragon  - 5e DnD Inspired for RPG and Wargamers

28mm_Druid.stl

Clue Weapon Set

Candlestick.stl

Jinx Pow-Pow Minigun - Arcane

STL_Jinx Pow-Pow Minigun_Body_3Demon.stl

scarecrow wall art Halloween decor

scarecrow-1.stl

RETRO BLOCK Collection - Planter Set

Question mark block_planter_geek block collection_flowalistik.3mf

Nintendo Switch Brick Game Holder! 🔴

brick.stl

Apple watch Tamagotchi Case - 41mm

tamagotchi_26_41mmbutton_turner_print.stl

Mewtwo Clicker

ballV3.stl

Mechanical Puzzle Toy – Demo Parts STL

Bottom Left.stl

rihno.stl

Naval Battle

Baixo.stl

Print in Place Screw Fidget (v2?)

Something to fidget with, I printed with supports on but at 65* angle.

Pentagon Springo

This five-sided Springo behaves a bit differently! For best results, print at .15mm layer height with 100% infill. Prints without supports, just carefully pry the coil apart with a palette knife, butter knife or something similar after printing!

[Relevant Video](https://www.youtube.com/watch?v=HgY7ovYWplg)



RETRO GameStack - PS5/PS4/PS3/Blu-ray

RETRO GameStack - PS5-Blu-ray - Slot.3mf

Game

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Gate - Enviroment Prop - Court of Anubis - PRESUPPORTED - Illustrated and Stats - 32mm scale

Donut Factory Puzzle // 2x2 Twisty Marble Puzzle (24mm & 35mm inner cube)

PlayBook'd Settlers' Storage

Domino Holder

Marble Racer Singles Base Set

Gibbering Mouther

Druid - With Free Dragon - 5e DnD Inspired for RPG and Wargamers

Clue Weapon Set

Jinx Pow-Pow Minigun - Arcane

scarecrow wall art Halloween decor

RETRO BLOCK Collection - Planter Set

Nintendo Switch Brick Game Holder! 🔴

Apple watch Tamagotchi Case - 41mm

Mewtwo Clicker

Mechanical Puzzle Toy – Demo Parts STL

rihno.stl

Naval Battle

Print in Place Screw Fidget (v2?)

Pentagon Springo

RETRO GameStack - PS5/PS4/PS3/Blu-ray