**SKEWBITS** is an original puzzle game designed specifically for 3D printing. Fit the four swiveling Skewbits into various silhouettes. The premise is simple, but you may be surprised by how challenging the problems can get!

---

This is the **Premium Set** for SKEWBITS v2.0. Download includes:
- game board, bits, and problems 001-010
- premium versions of board, extra bits, and storage cases
- PDF solution guide

**_Additional files:_**
- [Preview Set (free)](https://than.gs/m/1063419?affiliateCode=MAKE)
- [Problems 011-015](https://than.gs/m/1063431?affiliateCode=MAKE)
- [Problems 016-020](https://than.gs/m/1063432?affiliateCode=MAKE)
- [Problems 021-025](https://than.gs/m/1063433?affiliateCode=MAKE)
- [Problems 026-030](https://than.gs/m/1063434?affiliateCode=MAKE)
- [Problems 031-035](https://than.gs/m/1063435?affiliateCode=MAKE)
- [Problems 036-040](https://than.gs/m/1063436?affiliateCode=MAKE)
- [Problems 041-045](https://than.gs/m/1063437?affiliateCode=MAKE)
- [Problems 046-050](https://than.gs/m/1063438?affiliateCode=MAKE)
- [Full Set (premium set + problems 001-050)](https://than.gs/m/1063421?affiliateCode=MAKE) _*single purchase_
---

This is _version 2.0_ of the game, with many exciting upgrades:
- All parts newly redesigned and 50 problems in total!
- The 'bits' have larger hinges that are stronger, easier to print, and fit into the problems more visibly. 
- The bits and problems can no longer be placed upside down by accident. 
- Everything was scaled up 120% so the bits are easy to pick up an manipulate by all hands big and small. 
- The problems have been redesigned to use less material but maintain the necessary rigidity
- I've moved the number labels to the front to make them much more clear. 
- I've rearranged some of the problems so the difficulty increases more progressively at first.
- Thanks to the brilliant solver program by [Darci Peoples](https://darcipeoples.com/), I've changed many of the problems to have fewer solutions, making certain problems significantly more challenging!
- The updated solution guide PDF is attached, including problems 001-050

[Watch my video about version 2.0](https://youtu.be/aLKqzI0Va5E)

---

**_Printing Guidelines_**
- bits : 0.16mm layer height, 2-3 walls, 0.4mm nozzle, 15% infill
- problems : 0.16-0.25mm layer height, 1 wall, 100% infill; *printing the first layer with one wall can help with bed adhesion of the number labels*
- board : 0.16mm layer height, 2-3 walls, 15% infill; *for better grid visibility swap filaments at 1.5mm layer height
- cover : _'wLogo'_ version is two parts. Print combined using a multicolor printer or using [Multipass Multicolor Printing](https://makeanything.design/multipass-multicolor/) technique for single extruders.
- board_premium : filament swap at 8.2mm height for better grid visibility. _'TPUgrip'_ can be glued to the bottom for a nonslip board, printed with TPU 95a or similar flexible filament. Use [E6000](https://amzn.to/3UIOdso) adhesive or similar.
- case : use _'size20'_  together with _'Sleeve_Wide'_ or _'size30'_ with _'Sleeve_Tall'_. Wide sleeve holds 21 or 20 problems with the Handle, Tall sleeve holds 27 or 26 problems with Handle. Handle can be used loose (slide in from the bottom of the sleeve) or glued into place.
---

Photographed models were printed using PolyTerra Matte PLA [(US Link)](https://bit.ly/polyTerra) Also on [Amazon](https://amzn.to/3PHOxFA)

SKEWBITS v2.0 Puzzle Game // Premium Set + Problems 001-010

bit_A_red.stl

____________________THIS IS DIGITAL PRODUCT___________________
______________________NON-REFUNDABLE_______________________
___________________STL FILES FOR 3D PRINTING___________________

Ready to print Juno's Blaster from Overwatch 2. The supports required. Some parts need to be printed multiple times (file names contain the approximate quantity). 
Prepared for ENDER 3 v2 or similar 220x220x250mm size printer. Lots of division options for convenient printing. Required 9x2mm magnets for mag fixation. 


Weight without supports: ~450g/5% infill
Dimensions: 425x95x311mm
Biggest part: 175x99x202mm
Contains:     30 STL files

If you encounter any problems with the model please contact me first.

Purchase of this 3D file grants a license for personal use only. Any commercial use is prohibited. Redistribution or resale of the file in any way, shape or form is prohibited. Printing of this file for sell or resell is prohibited. If you need a commercial license, contact the author.

You can find all my social media in https://linktr.ee/krotek_ink

____________________THIS IS DIGITAL PRODUCT___________________
______________________NON-REFUNDABLE_______________________
___________________STL FILES FOR 3D PRINTING___________________

Si Fi Juno Blaster Overwatch 2

Blaster.fbx

Discover a remarkably-crafted 3D model of Stolas from the popular animation, Helluva Boss, on Thangs.com. This meticulously designed model renders the character in a realistic 32mm scale and is fully presupported for 3D printing. The attention to detail showcases Stolas' unique traits and adds authenticity to the mini figure. The model falls under the Pop Culture category, celebrating the impressive world of animated characters. This miniature makes a great addition for collectors, fans of Helluva Boss, or anyone who appreciates pop culture. The 3D model is prepared for printing, offering convenience for users looking for a hassle-free experience. Immerse yourself in the world of Helluva Boss with this exquisitely designed 3D model of the character Stolas.

If you like my work, find more here - https://www.myminifactory.com/users/printedobsession
If you want to support my work, consider joining Patreon - https://www.patreon.com/printedobsession
Want to know more about my process? I have tutorials on YouTube - https://www.youtube.com/c/PrintedObsession
Check out my website - https://www.printedobsession.co.uk
CC BY-NC-ND
This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.


Stolas - Helluva Boss - 32mm Scale Presupported Miniature

Stolas.stl

Discover an incredibly accurate 3D model of Jack'O'Valentine, a popular character from Guilty Gear, exquisitely recreated as fan art on Thangs.com. This detailed model captures the essence of this iconic pop culture figure, showcasing everything from the character's unique hairstyle to her signature weapon, the ball and chain. As a part of the 'Pop Culture/All' category on Thangs, this 3D model of Jack'O'Valentine is perfect for fans of Guilty Gear or collectors of intricate 3D models. The artful attention to detail, as seen in the model's arms, legs, body, face, hair, halo, and even the ball and chain, makes it a must-have piece for every enthusiast. Explore the range of impressive visuals available for reference, showcasing the model in various angles and dimensions. Crafted by designer 'printedobsession', this 3D model of Jack'O'Valentine blends the perfect amount of pop culture appeal and 3D artistry.

Jack'O'Valentine - Guity Gear - Fan art

Jack O Valentine - Halo.stl

This is a mimic from the iconic role-playing game Dungeons and Dragons.  It's designed to provide players with a smaller scale dice roller to use that doesn't take up a lot of table space.  Load the dice in the back of the model and watch them emerge inside the mouth.
This model comes in 3 varieties that will suit all needs.  "The splintered mimic" has boards blasting off of it and 2 rows of spiky teeth.  "The revised mimic" has a more rounded off bottom set of teeth and a sleeker look requiring much less support.  "The Blunt tooth mimic" has blunted off human looking teeth that require much less support and have an increased ease of removal.

This model is available for personal use only.  If you would like merchants rights, please consider a membership.  This model and any other you get from me are then available to print and sell physically, both online and in person.  The .stl is never authorized for resale.

Mimic dice rollers.stl

Mimic dice roller revised.stl

blunt tooth mimic.stl

fang mimic dic roller.stl

Immerse yourself in the world of Pop Culture with this meticulously designed 3D model of Loona from the popular show "Helluva Boss". This expert work of fan art captures all the fine details of Loona's character design, from her distinct facial features to the unique style of her attire. Dive into the intricate details of her body structure, analyzed into different parts like head, body, hair, arms, legs, and tail. The high-resolution images give a detailed insight into each aspect of the model. The Pop Culture/Characters category of thangs.com houses this exquisite piece of 3D digital art. Get a first-hand look at the precision and attention to detail that went into crafting this model for all Helluva Boss fans. Perfect for collectors, hobbyists, or those looking to dive into the realm of 3D printing. Get your hands on the 3D model of Loona from Helluva Boss today!

If you like my work find more here - https://www.myminifactory.com/users/printedobsession
if you want to support my work consider joining patreon - https://www.patreon.com/printedobsession
want to know more about my process? i have tutorials on youtube - https://www.youtube.com/c/PrintedObsession

CC BY-NC-ND
This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.

Loona - Helluva Boss - Fan Art

Loona Remake - Full.stl

BEHOLD! THE INCREDIBLY LARGE TOME FOR PLAYING DUNGEONS AND DRAGONS!

And don't forget to take a look at my [Smaller Tome](https://than.gs/m/1124906) in case this is too big.

**Strap remix now available! That's right! Your Dungeon Master Tome can now be a "Book Bag"!!!** Download strap components [here](https://than.gs/m/1322963). Make sure to print print _Book Back_Strap.stl_ and _Pages_Strap.stl_ to be able to attach the strap!

**Update August 14, 2024:** Uploaded _Plain Cover.stl_ and _Dice Tower Part1_Lower tolerance magnet holes.stl_. The _Dice Tower Part1_Lower tolerance magnet holes_ file has increased tolerance on the magnet holes under the lip that hooks onto the front cover in case people struggle to get magnets inserted in such a tight space.

**Update August 11, 2024:** Uploaded _Dice Tower2 v2_ which has a lower tolerance for the magnets. Because of the little room there was to press-fit the magnets in, I've made it so you can just slide them in and use glue to keep them in place. I also updated the shape of the door of the dice tower.

**Update August 10, 2024:** Uploaded some lower tolerance hinge links for those who have difficulty snapping in the originals.

Now, before you get all excited, I highly recommend you read the ENTIRE description (with some exceptions) before starting your prints, just to be sure you don't have any regrets. (Who knew you'd be reading a tome in order to print a tome?)

-------------------------------------------------------------------------------------

Various inserts for the tome are available [here](https://than.gs/m/1116466).

**Don't forget you have access to other [custom front covers](https://than.gs/m/1131069) for this tome!**

-------------------------------------------------------------------------------------

**Disclaimer:** _The design was inspired by a friend who asked if I could make a D&D book for her to gift to someone. She knew nothing about D&D and neither did I. So I did some research and spoke with individuals who have played the game to get some ideas of what one might like in a tome like this one. So, if you have any feedback at all or any ideas on how the design can be improved or any additions that I could add to the book, please share! There will be a good chance you'll see some welcome changes if you do._

_This specific model's size practically utilizes the entire volume of my Bambu Lab X1-C. This means it was designed to fit on a 256x256 print bed. If you wish to attempt to scale things down, take a moment to visit the _Scaling_ section below before you decided that this is the direction you wish to go. I will be designing a smaller book for D&D, so you may have to be patient while waiting for that to come out if your print bed is too small._

_When specifying dimensions, they will be stated in terms of width x height x depth_

-------------------------------------------------------------------------------------

**Features:**
- Inserts for this tower were designed with "units" in mind so individuals can remix inserts according to their desires (Similar to gridfinity, but with different dimensions). Each unit is 30.5x30.5x25.2mm. So if I made a 1x1x1 insert, it would occupy 30.5x30.5x25.2mm. _Note: Make sure to incorporate tolerances when remixing inserts. I usually add a 0.2mm tolerance to each side, so the true measurement of a 1x1x1 insert for me would be 30.1x30.1x24.8mm._ 
- This model includes models for a dice tower that magnetically attaches to the book cover (See images for details).
- The dice tower was designed to fit in the tome in two different orientations. When folded, it will occupy a space of 4x3x2 units. When open, it will occupy a space of 4x6x1.
- The dice tower includes a door that opens to ensure dice land in the book and not on the floor (See images for details).

**About the Hinge Links:**
- The tolerance of where the hinge links clip into the book/dice tower are VERY tight. This is on purpose to ensure there isn't a lot of wobbling when opening and closing the book and helps to ensure longer durability of the hinge mechanisms. However, because of the way they were designed, you can scale them if you find the default thickness of them is too difficult to get snapped in. Just be sure to only scale them on the Z axis.
- Lower tolerance hinge links have been provided in case you feel iffy about scaling them. If you don't have man-hands like me, you might consider printing the lower tolerance hinge links for both the book hinge and the dice tower hinge. You should still get a nice fit.
- Because of the way the hinge links were designed, if they wear out or get too loose, you can easily print new ones and replace the old ones.
- You'll notice on one end of the hinge links, the hole is incredibly small. This is on purpose. The small hole is only 0.2mm thick before changing to the diameter that you see on the other side. I've found, when the plastic deforms when connected, it hugs the little "pins" and helps keep the hinge link from rattling. I've found this gives the book a more smooth and sturdy feeling when opening and closing it. If you're printing with something other than PLA, you might want to consider changing the link slightly according to your needs.

-------------------------------------------------------------------------------------

**Printing Instructions:**
Required Hardware:
28 - 6x3mm magnets (Yes, you'll need 28 of them... lots of magnets. Fortunately, you can usually buy a pack of 50 or 100 for $5-$10)

Supports? NEVER! GO TO HELL!
Brim: Recommended for all parts to avoid warping.

All models should be oriented in the way they were intended to be printed.

_What to print:_
- Book Front Cover - x1
- Book Back - x1
- Book front Hinge Interface - x1
- Pages - x1
- Long Hinge Link - x2
- Short Hinge Link - x2

Optional dice tower:
- Dice Tower Part1 - x1
- Dice Tower Part2 - x1
- Dice Tower Hinge Link - x2

The 3mf file provided was sliced in OrcaSlicer and has recommended configurations for printing each piece of the main tome.

-------------------------------------------------------------------------------------

**Assembly:**
[Video Instructions](https://youtu.be/_RWcHtnQimg)

All magnets should have a press fit tolerance. However, because of the different variations of printers out there, you may find you need to glue yours in or you may have to use brute force. _**Note**_: When installing magnets, be extra sure you're installing them in the proper orientation so they attract each other. I've made mistakes and don't want you to repeat them.

The Book Front Hinge Interface is meant to be glued into where the book binding would be on the front cover. It's designed so, if you try to place it incorrectly, it won't fit right. (I'm considered implementing some sort of fastening implementation to attach the hinge interface to the front cover. So if that's one of your gripes, stay tuned).

Glue the pages onto the book back.

When snapping in the hinge links, it is recommended that you snap the hinge links into the _Book Back_ portion of the book, first, before snapping them into the _Book Front Hinge Interface_. I've just found it easier to do it in this sequence.

If you feel like the hinge links are WAY to thick to ever have a dream of fitting in there, you're not alone. I rely on plastic deformation to occur when snapping them into place. Because the infill is still somewhat hollow, there is slight movement in the plastic as you press the links into their designated locations. I've found myself man-handling the things before and it can be frustrating if you just can't get them in. If you can't seem to get them to snap in, You can print some hinge links with the Z scale adjusted so they're a bit thinner.

Once all hinge links have snapped in, the assembly of your Dungeon Master Tome is complete! Now all you need to do is choose from the available inserts and customize your storage!

-------------------------------------------------------------------------------------

_**Scaling** (if you dare) *don't read this if you don't plan on scaling*_
_Disclaimer:_ If this starts to seem a little too complicated for you, rest assured I will be coming out with a smaller tome for lighter D&D users, so you can just wait for that if you'd like. It will fit smaller print beds.

Now, because of the magnet holes, any scaling will also scale those holes. So you'd have to scale it in a way to where you can use 2x4mm magnets or maybe 3x1mm magnets. It doesn't have to be those sizes specifically, but just consider the size of magnets you might be able to use, and scale the model accordingly. Yes, this means you'll have to do some math to know what percentage to scale it. You'll most likely have to uncheck "Uniform scale" (or similar setting) because there's a good chance your x, y, and z scale percentages will be different to get your desired results.

**IMPORTANT**: _Once you determine your scale percentages, you'll want to use the same scale numbers for every part you print. **BUT BE CAREFUL!** The orientation in which everything prints is not the orientation it will be in when the model is assembled. For example: The **Book Front Hinge Interface.stl** file is meant to be printed on its side. So, given the shorter axis is in the Y direction, if you scale the **Z** axis of the book to 50%, then you'd scale the hinge interface's **Y** axis to 50% instead of its Z axis._

Dice Tower Part2 is a print-in-place portion of the dice tower that includes a door that hinges open in order to ensure rolled dice make it to the tome from the tower. The tolerance I've given to each edge is about 0.2 mm, so keep that in mind when scaling down. If your printer can handle a tolerance of 0.1mm, then scaling might just work for you.

-------------------------------------------------------------------------------------

Feel free to join [my discord](https://discord.gg/uqJwERhbxf) for additional support, questions, or suggestions!

Dungeon Master Tome - RPG Organization - BOOK BAG

Book Front Cover.stl

Long Hinge Link_Low Tolerance.stl

Short Hinge Link_Low Tolerance.stl

Dice Tower2 v2.stl

Dice Tower Link_Lower Tolerance.stl

Dice Tower1_Lower tolerance magnet holes.stl

Plain Cover.stl

Cut_Dice Tower Part1_Lower tolerance magnet holes.stl

Cut_Dice Tower Part1.stl

Book Back_Strap.stl

Pages_Strap.stl

The Tsugite Cube has reached unprecedented extremities with this 4x4 version of the confounding puzzle cube series. 

Join all 31 pieces in the correct order and orientation to create a continuous loop in the form of a solid 4x4 cube. The Kawai Tsugite joint connects in 3 different orientations, so this isn't your average packing puzzle! 

As a helpful hint, no like colors will touch when printed in 6 colors... Consider that a part of the puzzle since it's already difficult enough, but if you feel like an even more extreme challenge, you can print it all in one color.

This download also includes a flashy Special Edition 4x4 Stand, along with the default cube stand. There is also an STL of the entire assembled puzzle if you need help solving, or check out my full [Solution Video on YouTube](https://youtu.be/yZwMSwlxIy0).

---

**_Printing Guidelines_**

Print at 0.16mm layer height with 3 shells and 0% infill, 5 top and 5 bottom solid layers. No supports required! The puzzle parts are divided into 6 groups, where no like colors will be touching for the solved puzzle. You can split the models into parts within your slicer if you wish to print/color separately, or need to rearrange parts for whatever reason.

The SE_Stand is a somewhat difficult print without supports. I used fuzzy skin with 0.2mm thickness and point distance to hide any wobble artifacts near the top and as a general aesthetic. I printed with 4 shells, 0 top layers, and 15% lightning infill. You may also need a brim or minimal supports to improve printability. The basic stand is much easier to print!

4x4 Tsugite Cube Puzzle

4x4_White.stl

Alita Damascus Blade Sword - Alita: Battle Angel
- cut STL (200mm printers) in the attached ZIP folder
- uncut OBJ

**SCALE**
- Width approx. 130 mm
- Length approx. 908 mm
- Thickness approx. 43 mm

**THIS IS US!**
Hi! This custom model was created by **3Demon.** We're a team of 3D modeling and printing enthusiasts from Prague, Czech Republic.
With over a decade of experience, we specialize in crafting 3D-printable cosplay accessories and other unique designs. Explore more of our creations on Thangs, where you can join our **membership!** 
🔥 Membership starts at $9.75 monthly
🔥 Grants exclusive access to our incredible library of models
Follow and tag us on [social media](https://3d-mon.com/links/) to stay in touch! 

Alita Battle Angel Damscus Blade Sword

alita_sword_FULL_separated.obj

This is a digital 3D printable model of **2B Mahou Shojou Staff** from **Nier Automata fanart.**

The download contains pieces of the model ready to be 3D printed on a 200 mm print bed and files that are not cut into smaller pieces. All cut parts are placed on the print bed as we would print them to save you time.
- You can use a 150 x 2.5 cm rod instead of printing all the rod parts.

**THIS IS US!**
Hi! This custom model was created by **3Demon.** We're a team of 3D modeling and printing enthusiasts from Prague, Czech Republic.
With over a decade of experience, we specialize in crafting 3D-printable cosplay accessories and other unique designs. Explore more of our creations on Thangs and join our membership for exclusive access to our incredible library of models! 
Follow and tag us on [social media](https://3d-mon.com/links/) to stay in touch! 


2B Mahou Shoujo Staff – Nier Automata

NierAutomata_staff_01_3Demon.obj

3D printable model of **Caitlyn’s rifle from Arcane: League of Legends**
- The rifle is foldable in the middle and has a retractable barrel
- The files feature space for a spring (moving trigger) and moving lever 

The folding mechanism uses two circular magnets sized 10×3 mm to lock the rifle in its folded position.

3D Model fully ready for Simple 3D printing FDM, SLS,  and SLA printers
Digital data ready for 3D printing. The rifle is separated into smaller printable parts.
- Steel grip parts are prepared in 3MF file for slicing and printing with custom supports

**THIS IS US!**
Hi! This custom model was created by **3Demon.** We're a team of 3D modeling and printing enthusiasts from Prague, Czech Republic.
With over a decade of experience, we specialize in crafting 3D-printable cosplay accessories and other unique designs. Explore more of our creations on Thangs and  join our membership for exclusive access to our incredible library of models!

Caitlyn rifle – Arcane Act 1

OBJ assembly Caitlyn-v2-repeater season 1 3Demon.obj

28mm Mini Base Collection

This collection includes 16 28mm x 3.5mm disc bases of varying textures and designs. Ejoy these bases for your miniatures. 

Alien
Brick-Rounded
Brick
DiamondDeck
Dirt
Dirt-with-rocks
Moon
RockRoad
Scale
SciFi-Panel
Shells
Stone1
Trifoil
WoodFloor
WoodFloor2
WoodFloor3

Private Use Only
Become a MEMBER for commercial use and for more like this. Members get priority recommendations and customizations. We would love for you to join! 

Make sure to like and follow. Post your make so we can see! 

28mm Mini Base Collection

Mini Base - 28mm - Stone1.stl

The RoboBaller is a fully printable mechanical variation of the robotic basketball sculpture I designed for the youtube video linked below.  The arm mimics that of an actual basketball shot using a unique linkage design paired with a compound gear train. The files include the STLs for the shooting arm as well as the basketball net. Print one or many and throw down a game of horse, or see if you can make some trick shots!

The video below shows how easily this mechanism can be assembled!

**The STL File:**
Prints on all standard 3d printers without supports, and doesn't require any additional parts to be assembled.  

Designed for these balls: https://amzn.to/43Qb5c3
But there is a secondary scoop option so it can shoot standard ping pong balls.

Recommended print settings:

Layer Height: 0.2mm
Nozzle: 0.4mm
Infill: 15-18% 

Total Filament Required: ~400g

Minimum Build Plate Required: 185mmx185mm

**All the files have been pre-oriented to save you some set up time! All you need to do is drop the parts into your slicer and hit print!

Game

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

SKEWBITS v2.0 Puzzle Game // Premium Set + Problems 001-010

Si Fi Juno Blaster Overwatch 2

Stolas - Helluva Boss - 32mm Scale Presupported Miniature

Jack'O'Valentine - Guity Gear - Fan art

Mimic dice rollers.stl

Loona - Helluva Boss - Fan Art

Dungeon Master Tome - RPG Organization - BOOK BAG

4x4 Tsugite Cube Puzzle

Alita Battle Angel Damscus Blade Sword

2B Mahou Shoujo Staff – Nier Automata

Caitlyn rifle – Arcane Act 1

28mm Mini Base Collection

The Robo Baller

Colt (Original) - Brawl Stars

Genio (Original) - Brawl Stars

Draco (Only) - Brawl Stars

Draco (Original) - Brawl Stars

Lumi (Original) - Brawl Stars

Cordelius (Original) - Brawl Stars

Amber (Original) - Brawl Stars