Valentine's Day Flexi Baby Otters

2_FlexiOtterValentinesday_multicolor_thickerTOP.3mf

Gear Pathing Maze - concept level

Gear_pathing_maze_concept_level_base.stl

Skull Pop Beads

These “Skull Pop Beads” snap together to form spooky chains or rings as long as you want!

See here for video: https://youtu.be/pCv3Yx5U_7k 

The pieces are designed to be printed in “Vase” or “Spiralized” mode. The file is optimized for printing with a 0.4mm nozzle. Printing with different nozzle sizes is still possible but will affect the tightness of fit.

Each piece uses approximately 0.4g of material, making this a great design to use up the scraps of filament you have lying around! A full 1kg roll could print approximately 2500 beads, enough to make a chain 50m (164ft) long!

To connect pieces together, simply pinch the top end of one piece so that the opening becomes oval-shaped. Insert the oval end of the second piece inside and release. The pieces remain connected but can be separated again if needed. Create long chains or rings by adding as many pieces as you want.

Each piece takes approximately 5 minutes to print. It is, however, much more efficient to print multiple pieces sequentially! Setting up spiralized models to print “one at a time” takes a bit of planning as the pieces must be spaced and sequenced properly so that the hot end or gantry does not collide with the finished prints as it moves on to the next print. 

Make the bottom open by setting “bottom layers” to zero. Good build plate adhesion is essential, so ensure that your machine is well calibrated.

Similar Designs: 
Pop Bead Garland: https://social.thangs.com/m/513337 


The Skeleton King- Helmet-Mask 

1 skull done.stl

The Portal 

portal-magic-supported.stl

Wera micro driver holders for Multiboard

Wera micro screwdriver holders v1.step

Tiny Octopus

Cinderwing3D_Tiny_Octo.stl

Friendly Articulated Slug with hidden magnets

I used 2 magnetics (6x3mm).
With a layer height of 0.2mm you should set up a pause at layer 19.

The last to parts of the slug are not movable because of the magnets.
The slug is 150% scaled because of the magnets.
You should print with less weight, for e.g. 0% infill and not more than 2 walls.

Magnetics that I used: https://www.aliexpress.com/item/32951137017.html?spm=a2g0o.cart.0.0.22783c00OsamVW&mp=1

If you don't have a 3D printer, I sell it on Etsy: https://www.mikebayer3d.etsy.com

The original design is from _Isaiah_
https://www.thingiverse.com/thing:4727448

Follow me on social media:
[Facebook](https://www.facebook.com/Mike-Bayer-3D-Druckservice-108801391734722 "Facebook")
[Instagram](https://www.instagram.com/mikebayer3d/ "Instagram")
[Pinterest](https://www.pinterest.de/mikebayer3ddruckservice/ "Pinterest")
[Twitter](https://twitter.com/MikeBayer3D "Twitter")
[Printables](https://www.printables.com/social/244886-mike/prints "Printables")
[Cults3D](https://cults3d.com/en/users/mrmbmrmb/creations "Cults3D")
[Thingiverse](https://www.thingiverse.com/mrmbmrmb/designs "Thingiverse")

etsy Shop:
[etsy](https://www.mikebayer3d.etsy.com "etsy")

Chunky Toad - Super Mario Bros Kit | No Supports, No AMS, No Glue

Army Beige.stl

Red M&M -Spreading Love

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt by @ChelsC423***

***
***If you would like to sell physical objects, please see the CCT Partner tier on our Patreon***
***
If you would like to support me AND receive exclusive to Patron models every month check me out here:
https://www.patreon.com/chelscct


G

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Valentine's Day Flexi Baby Otters

Gear Pathing Maze - concept level

Skull Pop Beads

The Skeleton King- Helmet-Mask

The Portal

Wera micro driver holders for Multiboard

Tiny Octopus

Friendly Articulated Slug with hidden magnets

Chunky Toad - Super Mario Bros Kit | No Supports, No AMS, No Glue

Red M&M -Spreading Love

PLEATS Pot 001

Gridfinity Mintion Beagle Cam Mount

Stitch

Star Wars Endor Shadow Box (A)

Heat Set Insert Snap - M3 Standard & Short

1 CU - Label Holder - Multibin Insert

Floppy Ghost - AMS Optional

Playing Card Case 2

M3D Flexi Baby Cat

Pearl Planter Pot by MODERN MACHINE