Shakaworld3d Pumpkin Patch Dragon Challenge Release V1.stl

Another printing Challenge - the Pumpkin Patch Dragon is a print in place dragon.  The challenge is to print it without supports and a brim.

Squash Springo (2 sizes)

squash-full-bot-nosupports.stl

Flexy Italian Hand

This is a VERY SIMPLE file for a flexible italian hand. I am not that experienced with 3d modeling and this is my attempt to make something funny.

Guitar Wall Mount Hanger with Flexible Top

60mm_Arm.stl

FlexiGorilla 2.0

Articulated Flexi Gorilla. About 92mm x 74mm x 8mm at 100%. 

Prints with no supports.

Examples printed in Hatchbox Black PLA on Bambu X1-Carbon with 3 top & bottom layers and 15% gyroid infill.

Flexi Hammer keychain

Flexi Hammer Keychain, easy print.
Print with 30% infill density. 

Flexi Hammer Keychain

Coffee Pal

Coffee Pal Mug.STL

flexi bat

Pineapple Springo // Tasty Springos Pack No.1

pineapple-full-bot.stl

PrintABlok Flexi Block

178b Flexi Blok B.stl

Pentagon Springo

This five-sided Springo behaves a bit differently! For best results, print at .15mm layer height with 100% infill. Prints without supports, just carefully pry the coil apart with a palette knife, butter knife or something similar after printing!

[Relevant Video](https://www.youtube.com/watch?v=HgY7ovYWplg)



68 Key Cover // Embedded Print

[Process Video](https://www.youtube.com/watch?v=ABUVz4zIPfo)

A key cover made for the 68 (Schlage, SC1, C) type key. The key is embedded into the print by pausing at 3.4mm and, if necessary, moving the extruder out of the way, to place the key inside the print. Optionally, you can also do a filament change at 4.8 mm to introduce a second color for the top pattern.

---

Pause at Z height 3.4mm to embed key, and at 4.8mm to change colors.

If the layer isn't clean above the key, increase infill/bridging overlap in your slicer, or dry a coat of hairspray on the key.

Compliant Stand Clips

standclipwide.stl

Sausage Link Chain - Articulated Fidget Model

sausage_top.stl

Flexy Banana

A silly little print of a Flexible Banana. It's a great fidget toy.

No need for support while printing.

Prints in PLA with no problems, but I assume PETG should give the gecko an even more flexible.

Be aware that you need to have a pretty well-tuned printer to pull this off.

Have fun with your super flexi banana!

Creative Commons (4.0 International License)
Attribution-ShareAlike
: [https://creativecommons.org/licenses/by-sa/4.0/](https://creativecommons.org/licenses/by-sa/4.0/)

Flexi Extruder Toy

Extruder Toy Nozzle.STL

Three Wolf Moon - Articulated Flexi Moon & Wolves (print in place) | Meme

articulated moon.stl

Protective Case [Compatible with Samsung 20 000mAh Battery Pack]

2X Top & Bottom TPU Ring.stl

Hot Dog Pal

Hot Dog Pal Bun.STL

Door stop

**A door stop that you can hang on the door handle when you do not need it without blocking the lock.**
It is flexible and locks under the door when you push it down with your foot.

Size: 20 x 40 (height) x 120 mm
This is the V2
Don’t forget to post your makes!

**Print settings**
Required build volume: 20 x 40 x 120 mm
Material usage: 11g
Print time: 1h

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm – 0,28 mm
Outer walls: 3
Infill: 30% - or more if you want it to be less flexible
Build plate adhesion type: none, if you have bed bad adhesion then a brim 
If you experience any problems, please feel free to contact me on twitter or Instagram

Flexible

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Shakaworld3d Pumpkin Patch Dragon Challenge Release V1.stl

View 78 new models

Flexy Italian Hand

View 18 new models

FlexiGorilla 2.0

Flexi Hammer keychain

Coffee Pal

flexi bat

View 20 new models

PrintABlok Flexi Block

View 66 new models

View 111 new models

View 72 new models

View 10 new models

Flexy Banana

Flexi Extruder Toy

Three Wolf Moon - Articulated Flexi Moon & Wolves (print in place) | Meme

Protective Case [Compatible with Samsung 20 000mAh Battery Pack]

Hot Dog Pal

View 31 new models