Double Rack - DIY Filament Storage - RepRack Remix!

Double_Shelf_RepRack_V3.step

Vertical Filament Spool Parts Drawer (OpenSCAD)

Another empty spool project! This design is vertical to support a larger number of small removable bins.

**Introduction**
[https://youtu.be/jEJRSixYPKs](https://youtu.be/jEJRSixYPKs)

**Stand**
[https://youtu.be/TCCuzT0m3fg](https://youtu.be/TCCuzT0m3fg)


**Printing and Installation Tips**
The stand is highly recommended since it holds bins in even if a lock fails.

Print one side of the stand first to make sure all the measurements are correct.

Not all bolt holes are required, but the stand will be more sturdy if you use all of them.

Try printing a few test locks to find the correct clearance value.


**How do I customize this?**
This is an OpenSCAD project. OpenSCAD is a script-based modeling software specifically created for projects like this that need to be customizable.

If you're new to the program, it may look strange at first, but most of the work is just typing values into a form or selecting customization options from a dropdown list. You do not need to know any programming or write a single line code to use OpenSCAD.

Once you've entered everything you need, you can export an STL file for printing. Here's a helpful video that walks through the entire process!


**Can I sell copies of this?**

Yes! This project was shared under the [Creative Commons - Attribution](https://creativecommons.org/licenses/by/4.0/) license.

This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.

Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.

[Click here for attribution examples](https://wiki.creativecommons.org/wiki/best_practices_for_attribution)tion examples

Vertical Filament Spool Parts Drawer

Filament Box Upcycling Frame (free)

UpcycleStorage_v3_184x184_MainFrame.stl

Ender 3 Filament Spool Holder - Fully printable upgrade

Ender 3 Filament Spool Holder - Master.stl

Random Decision Wheel (OpenSCAD)

This customizable Random Decision Wheel uses an empty filament spool to create a drama - think of the big vertical wheel from the game show The Price Is Right, fused with a Magic 8 Ball and powered by recycling.


**Introduction**
[https://youtu.be/YXHaLJnrhDc](https://youtu.be/YXHaLJnrhDc)


**Customization Options**
Inner Spool Diameter
Diameter of the hole in the center of the spool

Outer Spool Diameter
Diameter of the outer edge of the spool

Inner Spool Width
Space between sides of the spool

Frame Thickness
Thickness of frame - affects both rails and stand

Filament Path
Include a path to run filament to tie rail parts together

Filament Path Diameter
Size of the filament path

Clearance
Space between parts

Parts
Which parts to display

Rail Display
View either a single section of the rail or the entire rail

Click Arm
Add a click arm to the stand

Pointer Arm
Add a pointer arm to the stand


**Additional Options**

Mix and match stand designs.
Add weights to the rails to get longer spins.
Bend the clicker arm slightly using heat to alter how much resistance it provides.


**How do I customize this?**

This is an OpenSCAD project. OpenSCAD is a script-based modeling software specifically created for projects like this that need to be customizable.

If you're new to the program, it may look strange at first, but most of the work is just typing values into a form or selecting customization options from a dropdown list. You do not need to know any programming or write a single line code to use OpenSCAD.

Once you've entered everything you need, you can export an STL file for printing. Here's a helpful video that walks through the entire process!


**Can I sell copies of this?**

Yes! This project was shared under the [Creative Commons - Attribution](https://creativecommons.org/licenses/by/4.0/) license.

This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.

Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.

[Click here for attribution examples](https://wiki.creativecommons.org/wiki/best_practices_for_attribution)tion examples

Filament spool

filament spool base.stl

RepRack Streamlined Clamp 

RepRack_Clamp_Remix_V1.step

Universal Spool Clip (Filament 1.75 mm)

clip.stl

Spool Fidget

Full Spool Fidget.stl

Filament spool adapter

Filament spool adapter Base.stl

Honeycomb Spool Holder

This simple spool holder is made to sit beside your 3D printer so that you do not need to rely on the original spool holder the printer comes with. It is meant for most (inner hole of spool must be 43mm or larger to fit) spools of filament 1kg or less. It has a modern aesthetic that culminates with the hexagonal pattern on its side wall.

Filament Spool

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Double Rack - DIY Filament Storage - RepRack Remix!

Vertical Filament Spool Parts Drawer (OpenSCAD)

Filament Box Upcycling Frame (free)

Ender 3 Filament Spool Holder - Fully printable upgrade

Random Decision Wheel (OpenSCAD)

Filament spool

RepRack Streamlined Clamp

Universal Spool Clip (Filament 1.75 mm)

Spool Fidget

Filament spool adapter

Honeycomb Spool Holder

K1 Max - Riser - SideSpool - Bowden extend clips

Modular Filament Spool Carrier

Filament Spool（Designed by Kingroon）

Filament Spool with silica Beads storage

3D Pen mynt3d spool holder

Drill Attachment for Bambu lab Spools

Filament Spool Roller

FDplast Spool

Inland Filament Roll Tray RH.stl