pumpkin with flowers wall art autumn wall decor

pumpkin with flowers.stl

Christmas Spiral Teardrop 2023 

Christmas Spiral Teardrop Ornament 2023.stl

Santa Boot Print

Santa Boot Print.3mf

christmas ornament earrings pack christmas ornaments jewelry pack 

ornament ball pack earrings.stl

SNOWMAN FDM LOW POLY PRESS PRINT

snowman final full_v2.obj

Christmas Ball - Fine Diamond Lattice 

Christmas Ball Fine Diamond Lattice.stl

Mini Christmas Ball - Medium Lattice

Mini Christmas Ball Medium Lattice.stl

Mini Christmas Ball with Straight Arms

Mini Christmas Ball Straight.stl

bold pumpkin wall art fall wall decor autumn decoration

bold pumpkin (1).stl

snow manes.stl

more Christmas decor for the holidays to get you into the festive spirit.   

christmas ornament wall art holiday wall decor 2d art

Festive Christmas Ornament Decor: Embrace the holiday spirit with this intricately designed Christmas ornament wall art. Ideal for adding a touch of yuletide cheer to any space. 🎄❄️✨

Acorn Pal

Acorn Pal Base.3MF

Christmas Ball with Intersecting Diamonds

Quad Four Point Diamond Ball Final.stl

happy halloween pumpkin.stl

Halloween Pumpkin Wall Decor: Illuminate your Halloween celebrations with this classic pumpkin design. A must-have for every festive decor, capturing the very essence of October nights. 🎃🌙🍂

Happy Hanukkah Menorah Corner Decor

Happy Hanukkah Menorah Corner Decor.3mf

Stack of Pumpkins

StackOfPumpkins.stl

Snowflake Ornament (Customize)

Snowflake_BigChamfer.stl

Balloon Dog -Bunny Ears

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt by @ChelsC423***
More Balloon Buddies, but this guy is festive ;)
***
***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***
***
If you would like to support me AND receive exclusive to Patron models every month check me out here:
https://www.patreon.com/chelscct

Egg Tealight Cover -*Diamond Drop*

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt by @ChelsC423***
Sized to fit a typical LED tealight candle. But can be printed larger or smaller for just décor!
***
***If you would like to sell physical objects, please see the CCT Partner tier on our Patreon***
***
If you would like to support me AND receive exclusive to Patron models every month check me out here:
https://www.patreon.com/chelscct

ZigZag Christmas Ornament

##Not to Be Sold
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

##About the Design
This is an elegant abstract sculpture masquerading as a Christmas ornament. It almost seems to change shape as you rotate it in different directions.

This ornament prints well with just a single perimeter. That makes it very light and lets the most light through is you use transparent/translucent filament. In fact, it positively glows. It also looks amazing printed with bichromatic or trichromatic filaments. 

The print shown in clear was printed with Matterhackers Transparent PLA. They were printed on an AnyCubic Mega S and sliced using Cura. I'll be adding pictures soon that show the ornament printed with Matterhackers Quantum Raspberry Gold and Translucent Blue printed on a Prusa MK3S+ sliced using PrusaSlicer.

##Resizing
These should scale up well, but I'm not sure how much smaller you could print them using a consumer FDM printer. Using a resin printer, you could probably print them much smaller.

##Print Time
About 5 hours

##Print Settings
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 mm.

*Infill*
Using PrusaSlicer, you won't need infill. Just set top and bottom to 1 layer and minimum shell thickness to 0.15 mm. That will keep the ornament light (about 13 grams) and will let the most light through if you use translucent/transparent PLA. 

If you use Cura, I would use support blockers set to 1-3 layers high to add infill just in those areas that are unsupported.

*Speed*
With PrusaSclier, I used the default speed settings for my printer and generic PLA. In cura, I used:
* Outer Wall: 35 mm/sec
* Inner Wall: 40 mm/sec
* Travel Speed: 60 mm/sec

*Build Plate Adhesion*
I used a brim. With the supports, you shouldn't need a raft.

*Supports*
You will probably need supports for both bed adhesion and the overhang on the first few layers. You shouldn't need supports for the loop at the top. Adding them would just increase the chances the supports broke and caused the print to fail. If you get supports inside the ball, just add a support blocker.

* Support Structure: Normal
* Support Placement: Touching Buildplate
* Support Overhang Angle: 60 Degrees (Cura) and 67 (PrusaSlicer)

Festive

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 75 new models

Christmas Spiral Teardrop 2023

Santa Boot Print

View 41 new models

SNOWMAN FDM LOW POLY PRESS PRINT

Christmas Ball - Fine Diamond Lattice

Mini Christmas Ball - Medium Lattice

Mini Christmas Ball with Straight Arms

View 26 new models

snow manes.stl

View 19 new models

Acorn Pal

Christmas Ball with Intersecting Diamonds

View 13 new models

Happy Hanukkah Menorah Corner Decor

View 25 new models

View 18 new models

Balloon Dog -Bunny Ears

Egg Tealight Cover -Diamond Drop

ZigZag Christmas Ornament