The most usable car among them is probably a pickup truck. This time, I made a foldable car with the motif of the old Ford F1 among the pickup trucks. The shape of this car had so many curves that it was difficult to produce a foldable structure. But I challenged, if I built this car in a foldable way, then I could build a car of a similar type.

You can open and close the hood, and open and close the door at the back of the load compartment.The wheels can all be rotated.

After completion, the side doors and rear fenders can be glued to stabilize them.

Please see the following video for the folding process.

Printing and Folding process with Ender3pro and Whambam plate - https://youtu.be/TMG1ndiN1Fg?si=mYDPzMG7CZSmJNUs
Printing and Folding process with Prusa i3 mk3 - https://youtu.be/uQHmDFYspjw?si=hZtaTC8swfRO5U-Q
Printing on Tevo Tarantula Pro with magnetic rubber bed - https://youtu.be/R5bSteNyK_o?si=d6m9FgIZPl2qDkvR

1 : 38 scale
When expanded, size = X 180mm, Y 122mm, Z 41mm After folding X 126mm, Y 50mm, Z 50mm

Design by GOODesign

Foldable pickup truck Ford F1

GOODesign_Foldable_Pickup_Truck-F1.stl

Get commercial license and download newest models cheaply- https://www.patreon.com/goodesign
The feature of a foldable car is that it can be designed to move several parts without assembly. Moving structures of existing car models are adding new structures one by one to implement in foldable design. The foldable van designed this time has realized two new moves with another new challenge.

First, we realized the rear door of the hinged type. Though the hinges are somewhat exposed, the actual hinges are also visible, so this design is not much different from the actual one.

Secondly, we recreated the sliding side door movement. This structure is the first structure made in 3D printing design, and there will be various uses for foldable design in the future.

The Ford E series refers to a series of van cars manufactured by Ford since 1960. The design of the fourth generation has been produced so far, and the chosen one as a foldable van is the second generation design. The second-generation Ford Econoline van was produced from 1968 to 1974.

The reason for choosing this car as the first foldable van is because it has emerged as an important role in the films Ant-man and Wasp (2018) and Avengers End game (2019).

Feel the new joy of 3D printing while remembering the innovative new structure of the foldable design and the memories of the movie.

Please refer to the following video for the folding process.

Folding process with Prusa i3 mk3 - https://youtu.be/w6HXtw1P7vE?si=MLPNFOa_A7buuVK6

Folding process with Prusa i3 mk3 02 - https://youtu.be/Yhx3MD2TJes?si=yctL9TJ8iJSsQAXT

Folding process from 3d Printing and Technology - https://youtu.be/zGGwPUTw4uQ?si=YjKZOB1CNI5pZ9V3

1 : 38 scale

When expanded, size = X 172mm, Y 143mm, Z 35mm After folding X 130mm, Y 53mm, Z 55mm

FORD

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Foldable pickup truck Ford F1

Foldable Van - Ford Econoline