Get commercial license and download newest models cheaply- https://www.patreon.com/goodesign

The previously made excavator has gained great popularity from customers. So I wanted to design more heavy equipment, so I designed the skid loader this time. Again, all movements have been reproduced.

The making process is as follows.

Fold the lower body and fit the tire.
Sliding the engine through it, then inserting it into the cockpit.
Glue the grate windows.
Pull the cylinder of the lift arm until it clicks into place.
Rotate the piston and fit it into the lift arm. And put this piston in the cylinder.
Connect the safety tread between the lift arms.
Connect the bucket to the lift arm.
Connect the lower body to the lift arm and connect the cockpit + engine parts to complete.
https://youtu.be/UbvlE84jyaQ

We hope you love this skid loader a lot, and look forward to the heavy equipment that will be introduced in the future!

1: 35 Scale

Largest part in printing, size = X 42mm, Y 102mm, Z 24mm, After full assembly size= X 52mm, Y 100mm, Z 57mm

Skid loader (Print-in-place Articulated)

GOODesign_Cockpit.stl

Get commercial license and download newest models cheaply- https://www.patreon.com/goodesign
While designing many folding cars, I thought a lot about what would express the new structure as the next step. Then I came up with the idea of implementing a steering system. And I came to the idea of making this steering system easier to see. I thought of an F-1 racing car that was suitable for this, but it was too difficult.
So, choosing a simpler design, I found the Caterham Super 7.
And after trying in various ways, I realized a steering system that does not require assembly!!!

Another challenge is designing the parts to be separated and printed according to the color. Even if there are still few printers capable of multi-color printing, setting is difficult. That's why I designed it so that you can enjoy the result of combining various colors with a printer that prints in one color.

The folding sequence is a bit complicated. Please be sure to refer to the video~
1. Insert the rear wheel into the body.
2. Fit all tires.
3. Connect the tie rod to the opposite wheel.
4. Connect the front body as if wrapping it from the top to the bottom of the steering system. And press it up and down to connect it tightly.
5. Glue the rear wheel cover to the rear body. And connect this rear body to the back of the main frame.
6. Fit the front wheel cover to the hole in the steering system. This front wheel cover serves to securely fix the tie rod.
7. Insert the rest of the parts (head lamp, steering wheel, windshield, muffler, soft top, etc.) to complete.

https://youtu.be/uCpGgSqG3Pc
https://youtu.be/fZ5DxL13gLA

Size, when all parts are fitted X 68mm, Y 133mm, Z 46mm

Foldable Caterham Super 7

GOODesign_Main_Frame.stl

Get commercial license and download newest models- https://www.patreon.com/goodesign
With the request and high vote from FAB365.net's request page, I designed this foldable Willis Jeep.

Through this folding Willis MB Jeep, I made my first convertible car. The convertible car requires a lot of work as it is necessary to make a chair and interior, and there is little space to put the structure. In this work, I found it very difficult to make a convertible car by folding it.
This time, I inevitably adopted a way to separate the wheels. And some parts were printed and attached separately. The hood can be opened and closed, and the windshield can be rotated forward. The wheels also roll very well.

The folding process is as follows.
1. Rotate the front part of the jeep and turn it over.
2. Connect the lower body to the upper body.
3. Close the hood and move the windshield forward and tilt it back.
4. Press and fit each of the four wheels.
5. Put the fuel tank base on the back and put the fuel tank on top.
6. Attach the spare tire to the rear of the vehicle.
7. Cut the filament to a length of 18mm, fit it on the steering wheel, and apply adhesive to the front hole of the driver's seat.

Check youtube videos about folding process below.

1 : 32 scale
When expanded, size = X 73mm, Y 104mm, Z 37mm After folding X 50mm, Y 108mm, Z 52mm

Foldable Willys MB Jeep

GOODesign_Jeep Body.stl

One of the indispensable items for Christmas is a house made of cookies. I thought it would go well with the ginger bread people I made before, so I made it this time.

Putting an LED candlelight through the roof will help create a Christmas atmosphere.

Caution! You should never add real candles.

LED candles generate little heat, so there is no problem. Use only LED candles.

Print and fold video- https://youtu.be/nzIMBGHdzIU

When expanded, Fence size = X 41mm, Y 41mm, Z 10mm / Base size = X 110mm, Y 146mm, Z 7mm / Wall size = X 99mm, Y 123mm, Z 83mm / Roof size = X 158mm, Y 130mm, Z 51mm, After folding X 110mm, Y 149mm, Z 115mm



Foldable_Cookie_House

GOODesign_Cookie_House_Wall.stl

To make Gingerbread Man not lonely, his couple Gingerbread Girl has been added. Print this Gingerbread Girl together so that Gingerbread Man is not lonely!

One of the things that reminds me of Christmas is the gingerbread man. These cookies, shaped like a person, are featured in animations and are very popular with people. I created this design with the idea that this gingerbread man could move or stand.

This gingerbread man has its head, arms and legs rotated, and can even stand with its legs spread back and forth.
The bow tie can be printed separately and glued.

There are holes in the head, so you can even put a string or ribbon to decorate the Christmas tree.

Printing and play Prusa i3 mk3 - https://youtu.be/6WydQWmBaX4
Printing and review from greg - https://youtu.be/2EnBFVgeEz0

size = X 76mm, Y 97mm, Z 19mm

FAB365

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Skid loader (Print-in-place Articulated)

Foldable Caterham Super 7

Foldable Willys MB Jeep

Foldable_Cookie_House

Gingerbread_girl