Ball Bearing Fidget with Spikes

Ball Bearing Fidget with Spikes.stl

Ball Bearing Fidget

Ball Bearing Fidget.stl

Ender 5 Outer Frame Braces

Outer_Top_Frame_Braces.step

Corner Caps for 3D Printer Frame Extrusions

Outer_Bottom_Frame_Brace_V2.step

Ender 5 Extrusion Caps - Front Bar Removal!

Extrusion_Caps_V2.step

Ender5 Pro/Plus Hotend Strain Relief Remix

Remixed Ender 5 (Pro, Plus) hotend strain relief for bowden tube and heater/thermistor wiring.

Ender 5 Pro Plus Hotend Strain Relief Simple

Ender5 Plus Brace

I made this brace for my E5P, but really it will work with any corner on aluminum extrusion that is compatible with the 2020 profile.

To attach them to my printer I used M5x16mm bolts and a t-slot nut like the ones found here: https://a.co/d/ajzrpvo . I used these so I could put them on my printer without having to take the whole thing apart.

MS DD Linear rail mount for Creality / Ender printers

Made this a full size version from my original that is also here on Thangs.
Minimal supports needed. I block the nut recessed areas, they don't need support but the slicer will want to put them there.
I included some pics of the blockers and the supports form Cura.
Printed with .2mm layers.
Recommend 1.2 mm walls and top, I went with 3mm on the bottom, this gave it a nice rigidity for the belt grooves. 
Pop in the M3 nuts after printing and secure them in place with a screw before installing on the printer, this will seat them well and let you know if you have an issue.
All the holes are in the same locations as the MS metal version, so attachments like CR or BL touch can be added without any issues, as well as fan shrouds.
I flipped the hook on the right for the wiring (ender 5 MS plate has this), it made more sense to me the way I have it.
You still need the Micro Swiss extruder hardware for this to work, if switching from rollers to linear rails and you already have a MS DD extruder, then this is perfect for you.
Pica aren't the best but you get the idea.


RBJ magnetic cooling system

Main Body.stl

Ender series printer extended spool holder

This is an extender spool holder for any Ender series printer to allow you to mount wider spools on the printer

HMG7.4 MGN12-H Tall Linear Rail Top X Carriage V3.stl

This STL is a component of the Hero Me Gen7 Printhead assembly for 3D printers.

**Hero Me Gen7 is a modular printhead platform for 3D printers with excellent part cooling and the most compatibility across printers, hotends, extruders, ABLs, and other components.**

 The Hero Me Gen7 is all about choice and personal preference. If you have been upgrading your 3D printer, you've made choices about what is important to you, Your choices are likely going to be different from everyone else. When choosing a hotend, extruder, and ABL combo (not to mention fans and accelerometers), where are you going to find a printhead platform that will accommodate all your selected components (which could be a rare combo), for your specific 3D printer AND provides part cooling that gives you great print results. **This is what the Hero Me Gen7 is all about!**

Think of the Hero Me platform as lego blocks for printheads, there are mounting parts for each component (hotend, extruder, fans, ABLs, etc.) that stack and mount to a core Base. Component specific mounting parts can be interchanged for another of the same type. So, should you change your component selection(s) in the future, you do not have to start over, you simple replace the single STL mount that is matched to the new component. There is no need to yet again go looking for a new set of mounting hardware that was not likely to have been designed to work with each other in the first place.

So to give you choice and fulfill your personal preferences in 3D printing, the Hero Me Gen7.3.2 now supports over 100 3D Printer models (plus clones), 46 Hotends, 34 Extruders (over 45 mount options), 17 ABL Sensors (34 mount options), 35 Part Cooling Duct options, 12 Cable Management options, 11 ADXL345 mounts, and 4 LED bar mounts (among many other options). Gen7.3.2 supports most of the popular 3D printers and components available. 

If you know your 3D printer model, hotend, fans, and optionally an extruder, ABL sensor, ADXL345 accelerometer (for Klipper), and any other options for your printhead assembly, you can scan through the Hero Me Gen7 Release 3.2 folder, or use the Thangs Advanced Search.  Be sure to set the creator filter to: ‘MediaMan3D’ then search for ‘HMG7’ which should bring up all the STLs. You can refine your search from there by component, brand, etc.

If you find that you have a 3D printer model or component that is not yet supported, send me information and preferably a STEP or STL (or link) if you know of one for the X carriage of that printer or the component and I will create a mount for it. Send to: MediaMan3D@gmail.com

If you want Hero Me documentation… The Hero Me Gen7.3.2 folder of STLs on Thangs is organized into sub-folders by component category, with sub—sub-folders for type and brand with well defined filenames to make it easy to find what you need. If you want documentation to help you select and assemble the Hero Me Gen7 for your specific 3D printer, you can get a membership plan here on Thangs.  You will get a detailed 56 page parts selection and illustrated assembly guide along with assembly videos, private Discord server access (with over 2,000 Hero Me users), technical support, and much more, You also get exclusive access to new STL releases 30 days before being posted to Thangs, and other STL libraries. Check out the membership plans here:  [https://thangs.com/designer/mediaman3d](https://thangs.com/designer/mediaman3d)

Ender 5

Trending this Week

Categories

Trending

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Ball Bearing Fidget with Spikes

Ball Bearing Fidget

Ender 5 Outer Frame Braces

Corner Caps for 3D Printer Frame Extrusions

Ender 5 Extrusion Caps - Front Bar Removal!

Ender5 Pro/Plus Hotend Strain Relief Remix

Ender5 Plus Brace

MS DD Linear rail mount for Creality / Ender printers

RBJ magnetic cooling system

Ender series printer extended spool holder

HMG7.4 MGN12-H Tall Linear Rail Top X Carriage V3.stl

Main Cable Holder for Ender5/5+.stl

Wind Blocker for Ender 5 Plus (12x24" Lexan Sheet)

HMG7.3 Anet A8 Plastic X Carriage.stl

HMG7.4 Artillery Sidewinder X2 Gantry Adapter.stl

HMG7 Ender 3 V2 Gantry Adapter V3.stl

HMG7.2 Anycubic i3 Mega S X Carriage.stl

Lie Flat Spool Holder (with bearing)

HMG7.2 Anycubic Kobra Go Gantry Adapter.stl

Ender 5 Logitech C270 webcam mount