Human Bop It Extreme Costume

twistit-knob.stl

Shelf_Asus_TUF-AX5400.stl

A slanted shelf for Asus TUF AX5400 router, since it doesn't come prepared for wall mounting.

Slot in the back for cables to pass through and enough clearance to not get sharp bends. Holes for screws in wall supports

Printed with supports in PLA laid flat on the back of the wall supports. Took roughly 10 hours with a Sovol SV06+

Weller ET soldering tip organizer (~5.5mm base )

# **Soldering Tip Organizer**
Inner hole diameter is 6mm, holes extend ~18mm. Will hold any tips that fit those dimensions accounting for shrinkage with your printer/filament.

**Infill is required to support internal geometry.**
7% Line infill using Cura worked well for me.

DM-S0020 2.1G Ultra-Micro Servo

These new tiny servos are super useful for tiny robotics. Here is the model so you can incorporate them into your designs. 

Affiliate Link: https://amzn.to/47jrcRj

Arduino Uno Lcd Holder

It Holds a 16x2 LCD and an Arduino UNO.
_This Model works with the I2C module. _

Use **2 M3x 8/6/4** for the LCD 
Use **3 M3x 8/6/4** for Arduino. 

Print Settings: 
.4 mm nozzle 
.2 layer height
**Auto Tree Supports**
(skirt and brim are optional)

TENEX - Solid State Volumetric Display

Volumetric_Display v11.step

Opus BT-C2400 Eneloop Mount

OPUS BT-C2400 and Double A Eneloop.stl

DIY DeLorean Time Machine with Lights!!

front_trans.stl

Phone stand 2.stl

Phone stand 2.
Completely FDM printable and right to use as Desk phone stand.

Gridfinity Breadboard Bins 2x1

Gridfinity 2x1 Breadboard Bin Front Text.stl

Gridfinity DSO138 Enclosure 3x1

Gridfinity DSO138 1x3 Base.stl

Gridfinity SMD/Component Handy Holder

Gridfinity 2x1 SMD Handy Holder Base.stl

Gridfinity LCR-T4 2x1 Enclosure

Gridfinity 2x1 LCR-T4 Base.stl

NFC Key Tag

This is an NFC Key Tag for all 25-millimeter NFC stickers. I'd really appreciate some feedback while you're here because it would help me know what you want to see next.

Yunshan HW-622 1-Channel Relay Case ESP8266 40x65

ayatec_HW-622_Relay_Case_Top.obj

Gridfinity Solder Fingers 2x1

A handy little set of solder fingers that rest in a 2x1 Gridfinity slot. It has a large variety of slits that allow wires up to 4.5mm in diameter to be placed in it. Happy Printing!

Arduino Mega/2560 Breadboarding Station

This thang is for holding an Arduino Mega / Mega 2560 / Keyes MEGA 2560 Plus - or anything else compatible with that footprint - along with a 400 point breadboard such as the BusBoard BB400 or similar.

It should also fit an Arduino UNO!

The board should friction fit onto the pegs, and you should use your breadboard's sticky back to adhere it to the part.

The station is designed for a 400 point breadboard, but there's no reason you couldn't stick any size of breadboard on there really!

Make sure your bed adhesion is good because this is a relatively large, flat print.

Here is the OnShape document for you to fork and tweak to your heart's content.

ELECTRONICS

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 66 new models

Shelf_Asus_TUF-AX5400.stl

Weller ET soldering tip organizer (~5.5mm base )

DM-S0020 2.1G Ultra-Micro Servo

Arduino Uno Lcd Holder

TENEX - Solid State Volumetric Display

Opus BT-C2400 Eneloop Mount

View 14 new models

Phone stand 2.stl

Gridfinity Breadboard Bins 2x1

Gridfinity DSO138 Enclosure 3x1

Gridfinity SMD/Component Handy Holder

Gridfinity LCR-T4 2x1 Enclosure

NFC Key Tag

Yunshan HW-622 1-Channel Relay Case ESP8266 40x65

Gridfinity Solder Fingers 2x1

Arduino Mega/2560 Breadboarding Station

BigTreeTech U2C Mount - CAN we do it?! Yes, we CAN!

View 25 new models

Nreal Goggle Type Cover