Valentines Bunny Hugging a Heart 

BunnyHuggingHeart.stl

MINI PLANETARY EGG v2

**Mini Planetary Egg Container v2**

This egg shaped container prints-in-place and uses a planetary gear stage on the bottom which allows it to open 4 times faster than its turned. 

This is the updated version of the mini egg container I made last year. That version was hard to print and the teeth skipped easy since it was a scaled down version of the larger [Planetary Egg Container]( https://social.thangs.com/m/53994). I redrew this version at a smaller scale with less teeth and I increased clearances so it would be easier to print.  It is easier to print then the previous version but I did still have to tweak some settings for best results but now I get a successful print every time. They only weigh 25g each, so I'm making a bunch to give away.  If you have issues with this scale the original egg is still easier to print. 

Prints in place with no supports. I printed it with a .4mm nozzle at .2mm layer heights but a smaller nozzle would make it easier to print.  Make sure your first layer height is perfect. You may have to adjust retraction settings as a result of short extruder movements. 

Printed on the [Muldex]( https://github.com/3dprintingworld/MULDEX) rep-rap IDEX printer 

Need Help?  Try our [Facebook Group](https://www.facebook.com/groups/1390970855008168)
___
**Support and Licensing**
If you would like to help support more free models, or get permission to sell physical copies of my models, consider joining my [Patreon]( https://www.patreon.com/3dprintingworld)


3D Printed Bunny Vase – Cute Animal Flower Holder for Home Decor and Gifts

Bunny vase_Body.stl

Mega Planetary Egg Container

**Mega Planetary Egg Container**

This egg shaped container prints-in-place and uses a planetary gear stage on the bottom which allows it to open 4 times faster than its turned. 

 This a scaled up version of the original [Planetary Egg Container]( https://social.thangs.com/m/53994), but I have decreased the clearances before scaling it up so they are the same as the original size. 

Its roughly 180mm tall, scaled up 160% of the original.  If you wanted to go bigger I think it would be safe to scale the model even more but I haven’t tried it.  The biggest downfall to making it bigger might be that it would be hard to turn due to the gear ratio. 

**How it works**
The bottom outside shell is the ring gear, the outer top shell is the carrier, and the inner shell is the sun gear.  Rotating the bottom shell  while holding the top shell results in the plant gears rotating inner shell at a 4:1 ratio.  36 teeth of the sun, divided by 12 teeth of the planet, plus one.

**Print instructions**
Prints in place, designed for a .4mm nozzle, .2mm layer heights, no supports at 100%.  There is a 6mm hex hole in the sun gear to free it up the gears if necessary. 
**Remove the brims** 
There are four built in brims attached to the sun gear that will need to be removed, I did so easily with side cutters

Printed on the [Muldex]( https://github.com/3dprintingworld/MULDEX) rep-rap IDEX printer.
___
**Support and Licensing**
If you would like to help support more free models, or get permission to sell physical copies of my models, consider joining my [Patreon]( https://www.patreon.com/3dprintingworld)


THE DRAGON EGG

EGG BOTTOM -v01.3MF

M3D - Baby Bunny

M3D-BabyBunny_body_keychain.stl

Bunny Bundle Multi-Pack

Bases - Bunny Paws.3mf

M3D - Baby Bunnyray

M3D-BabyBunnyRay.stl

Voronoi Egg

Top.stl

Easter Chocolate Bunny Piggy Bank / No Supports / 3MF Included

Chocolate Bunny Body.stl

Eggables Hippo

HippoEggable1Color3MF_FunFam3D.3mf

Easter Bunny - Articulated - Flexi

#28 Easter Bunny - Articulated - Flexi.stl

Mrs Easter Bunny Not So.. XL, for smaller build plates below 300x300x300

not so xl Mrs Bunny XL.3mf

Eggables Cow

CowEggables1Color3MF_FunFam3D.3mf

XL April Showers Goose, for large build plates above 300x300x300mm

XL Aprils showers Goose.3mf

XL Easter Bunny - for larger build plates

XL Easter Bunny.3mf

Flexy Bunny Figurine + Keychain 

bunny standing flexy.stl

Easter Day Flexi Rabbit

EasterRabbit_Keychain_02.stl

Eggables Pig

PigEggable1Color3MF_FunFam3D.3mf

Eggables Fox

FoxEggable1Color3MF_FunFam3D.3mf

EASTER

Most Popular Paid of All Time

Categories

Paid

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Valentines Bunny Hugging a Heart

MINI PLANETARY EGG v2

3D Printed Bunny Vase – Cute Animal Flower Holder for Home Decor and Gifts

Mega Planetary Egg Container

THE DRAGON EGG

M3D - Baby Bunny

Bunny Bundle Multi-Pack

M3D - Baby Bunnyray

Voronoi Egg

Easter Chocolate Bunny Piggy Bank / No Supports / 3MF Included

Eggables Hippo

Easter Bunny - Articulated - Flexi

Mrs Easter Bunny Not So.. XL, for smaller build plates below 300x300x300

Eggables Cow

XL April Showers Goose, for large build plates above 300x300x300mm

XL Easter Bunny - for larger build plates

Flexy Bunny Figurine + Keychain

Easter Day Flexi Rabbit

Eggables Pig

Eggables Fox