Christmas Tealight - Christmas Tree - separated Parts

Christmas_Tealight_Bottom.stl

Finial Noise Ornament 2

Finial Noise Ornament 2.stl

Micro SD Mini Mushroom

Display Only Minishroom.obj

Happy Easter sign, for XL & Not So.. XL Easter Bunny

happy easter for not so xl version.stl

Shadow Leaf – A Bold Fusion of Nature and Sculpture

Shadow Leaf.stl

Geometric Lion wall art - B 

GEOMETRIC-lion-second_full.stl

Smartphone sofa

Sofa.stl

Grand Kaleidoscope Christmas Ball

**ABOUT THE DESIGN**
Out of all my Christmas ornaments, I think this is my new favorite. I love looking at it from all angles, Each new angle reveals some new detail you couldn't see before.

It can be a little bit of a challenge to print, but if you follow the instructions I've provided below, you should get a clean, strong print at a reasonable weight. You will need to know your slicer app and your printer well to print this. I use advanced techniques and settings to print it. You'll also need to know your filament well.

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**RESIZING**
These should scale up well, but I'm not sure how much smaller you could print them using a consumer FDM printer. Using a resin printer, you could probably print them much smaller.

**PRINT TIME**
About 7.5 hours.

**PRINT SETTINGS**
I strongly recommend using all my print settings on your first print. If you want to increase the walls, change the print speed, add infill, etc. after that, go for it. You might want to print this page.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 mm
* Alternate Extra Layer: Yes
* Top/Bottom Layers: 2 

*Infill*
I use infill in select areas, but I do not apply infill everywhere. Adding it everywhere will greatly increase the weight of the ornament without any earl benefit. This is designed to hang from a tree, so it needs to be light. At the bottom of this section, I explain how to add infill to just one area using Cura. I don't know if you can do this with other slicers.

I use infill in the top of the stem and the loop to strengthen them. There, I added 100% infill using a support blocker scaled to 175% (in all axes) aligned to (0,0,100.2 mm).

I also added infill to areas where a part of the ornament started printing in free space without any support. In most cases, I added a very small area of infill (usually just 3 layers high) plus a single bottom layer to add strength to the infill. They act like bridges. The smaller bridges don't tend to print cleanly, they work really well and you'll never see them once the print is done – unless you print with transparent filament. For these bridges, I added 1 bottom layer and used 15% line infill. **In the global settings, I set “Extra Infill Wall Count” to 1.** To get to that setting, you'll have to temporarily set the global infill percentage above zero. Then, the option for Extra Infill Wall Count will appear. Set it to 1, then set the global infill percent to zero. The extra infill wall setting will be retained, though setting infill to 0 will hide it again.
Since I also add a support blocker that's 75 mm wide (see supports section), I make my bridges 85 mm wide on at least one side so I can still select them individually once the support blocker is in place.

Below are the exact settings I used for the bridges:

<table>
<tr>
<th>X Size</th>
<th>Y Size</th>
<th>Z Size</th>
<th>X Position</th>
<th>Y Position</th>
<th>Z Position</th>
</tr>
<tr>
<td>85 mm</td>
<td>3.5 mm</td>
<td>0.6mm</td>
<td>0</td>
<td>0</td>
<td>22.2 mm</td>
</tr>
<tr>
<td>85 mm</td>
<td>3.5 mm</td>
<td>0.6mm</td>
<td>0</td>
<td>9.25 mm</td>
<td>23.7 mm</td>
</tr>
<tr>
<td>85 mm</td>
<td>3.5 mm</td>
<td>0.6mm</td>
<td>0</td>
<td>-9.25 mm</td>
<td>23.7 mm</td>
</tr>
<tr>
<td>85 mm</td>
<td>3.5 mm</td>
<td>0.6mm</td>
<td>0</td>
<td>0</td>
<td>24.6 mm</td>
</tr>
<tr>
<td>85 mm</td>
<td>3.5 mm</td>
<td>0.6mm</td>
<td>0</td>
<td>9 mm</td>
<td>26.4 mm</td>
</tr>
<tr>
<td>85 mm</td>
<td>3.5 mm</td>
<td>0.6mm</td>
<td>0</td>
<td>-9 mm</td>
<td>26.4 mm</td>
</tr>
<tr>
<td>85 mm</td>
<td>85 mm</td>
<td>3.6 mm</td>
<td>0</td>
<td>0</td>
<td>32.55 mm</td>
</tr>
<tr>
<td>3.5 mm</td>
<td>85 mm</td>
<td>1.2 mm</td>
<td>0</td>
<td>0</td>
<td>46.35 mm</td>
</tr>
<tr>
<td>3.5 mm</td>
<td>85 mm</td>
<td>0.6 mm</td>
<td>0</td>
<td>0</td>
<td>49.5 mm</td>
</tr>
<tr>
<td>85 mm</td>
<td>85 mm</td>
<td>3.6 mm</td>
<td>0</td>
<td>0</td>
<td>59 mm</td>
</tr>
</table>

To add infill (or extra walls, tops or bottoms) to just one area of an object in Cura:
1. Add a support blocker
2. Select the support blocker and scale and position it where you want the added infill. **Be sure to scale it first.** Cura scales blockers from the middle. Changing the Z size after you position it changes which layer the infill begins on.
3. Select “Per Model Settings” then select “Modify Settings for Overlaps”
4. Select “Select Settings” and check “Infill Density” then select “Close”
5. Set Infill Density to 15%.
6. Set Bottom Layers to 1.

*Speed*
* Outer Wall: 18 mm/s
* Inner Wall: 20 mm/s
* Top/Bottom Speed: 20 mm/s
* Support Speed: 30 mm/s
* Travel Speed: 85 mm/s

*Build Plate Adhesion*
I relied on the supports for build plate adhesion. 

*Supports*
I recommend using both traditional supports and adding cylindrical custom supports where the ledges come to a point. This means you'll have to set Support Placement to Everywhere, so I also used a support blocker scaled to 75 mm x 75 mm x 110 mm placed at (0, 0, 15 mm).

* Support Structure: Normal
* Support Placement: Everywhere
* Support Overhang Angle: 55 Degrees

The custom supports help prevent the model from wobbling or coming loose from the print plate in addition to improving the print quality at the point where they touch the model.

Regal Antler Crown 3D Print Model for Cosplay & Home Decoration

All.stl

Spiral Ribbon Easter Egg 2025

Spiral Ribbon Egg Z2 Open v3.stl

Articulated Dragon 024 - Print in place - No supports - STL 

ARTICULATED DRAGON 024.stl

Vase

model105.stl

Coronavirus Christmas Ornament

Ornament (whole).stl

Decorative Monstera Leaves panels, Wall Art

Decorative-panel-with-montera-leaves_Print Profile.3mf

Volterra Vase for Elegant Home Decor

Volterra Vase.stl

Curved Bonsai Pot with Drainage Hole

BP014.stl

Terry the attack turtle! 

terry250k.stl

Spider Prop

Spider.stl

Bambi (Fanart)

Bambi.stl

TikTok Decoration

This 3D model is titled 'TikTok Decoration Frikarte3D'. It's a finely detailed representation of the TikTok logo, ideal for aficionados of the globally popular social media platform. The model maintains a very accurate representation of the actual logo design, with the characteristic musical note symbol featuring prominently. This TikTok decoration can serve as a unique eye-catching piece for your desk or to personalize your workspace with a touch of contemporary pop culture. The design is well-suited for 3D printing, enabling users to create their personal TikTok artefact directly from the model. Be it for decoration or for gifting to a TikTok fan, Frikarte3D's model brings the viral touch of the internet into the tangible realm. Please note that the final product of the 3D print will depend on the specifications of your 3D printer.

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

If you tag me and have a private account or I don’t follow you, please send me a message so I can see your post and appreciate your work.

Decoration

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Christmas Tealight - Christmas Tree - separated Parts

Finial Noise Ornament 2

Micro SD Mini Mushroom

Happy Easter sign, for XL & Not So.. XL Easter Bunny

Shadow Leaf – A Bold Fusion of Nature and Sculpture

Geometric Lion wall art - B

Smartphone sofa

Grand Kaleidoscope Christmas Ball

Regal Antler Crown 3D Print Model for Cosplay & Home Decoration

Spiral Ribbon Easter Egg 2025

Articulated Dragon 024 - Print in place - No supports - STL

Vase

Coronavirus Christmas Ornament

Decorative Monstera Leaves panels, Wall Art

Volterra Vase for Elegant Home Decor

Curved Bonsai Pot with Drainage Hole

Terry the attack turtle!

Spider Prop

Bambi (Fanart)

TikTok Decoration