Crumpled Vase

This can be printed in vase or mode or just as a normal print if you want something chunkier and more watertight.

No need for supports etc

Model in photos is printed in 3DJake Magic PLA

Flexi Skeleton Spider | Articulated Spider NO Support

Flexi Spider STL.stl

Vine Ball Home Decor

vine_ball.stl

MINIMALIST MULTI INCENSE STICKS ASH HOLDER

Incense Stand v1.stl

2 puppies with a heart.stl

Bat Skull

Caves are one of the most fascinating natural places around the world and they're the abode of a large number of animals.
The most famous one is certainly the bat 🦇
For this reason, if you want to explore these places, you might end up finding a lot of these Bat Skulls scattered all over the cave.

**Do you think you'd be brave enough to venture? Or are you scared by it?** 🦇💀

⸻⸻⸻⸻⸻⸻⸻⸻

**_Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @randomizy.3d, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #randomizy when sharing your video)_**

⸻⸻⸻⸻⸻⸻⸻⸻

**INSTAGRAM:** https://www.instagram.com/randomizy.3d/

**TWITTER:** https://twitter.com/Randomizy3D

**FACEBOOK:** https://www.facebook.com/randomizy.3D

**Check More Here:** https://linktr.ee/RandomizY

Howler Monkey Skull (Pre Supported)

Howler_Monkey_Skull.stl

Minimalist Chubby Pug Sculpture, Chubby Pug Statue

Pug2.stl

Halloween Swirl Skull Planter-Bowl

HalloweenSwirl_Skull-PlanterBowl.stl

Demon Skull Wall Hook

A6-DemonSkull-Hooks.3mf

Short Bony Basilisk - Articulated Snap-Flex Fidget (Tight Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Emerging from the crypts and cursed castles, the Bony Basilisk is here to bewitch and bedazzle just in time for the spooky season! With its detailed skeletal structure, this bony behemoth is prepared to perch on your shelf as the haunting highlight of your Halloween assembly or stand sentinel, casting a bone-chilling shadow for your guests.  This ancient creature refuses to let the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the Bony Basilisk to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

This Bony Basilisk is the third creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Tight** tolerance model.  For the other tolerances, please check out the other versions of the model below:

Medium Tolerance Short Bony Basilisk: 
Coming Soon
Loose Tolerance Short Bony Basilisk: 
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Short Bony Basilisk, be sure to check out it’s more mature, older sibling, the :ong Bony Basilisk:

Tight Tolerance Long Bony Basilisk: 
https://than.gs/m/936921
Medium Tolerance Long Bony Basilisk: Coming Soon
Loose Tolerance Long Bony Basilisk: 
Coming Soon

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Sleek-Eyed Bone Snake (Tight) - Articulated Snap-Flex Fidget 

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.
This is the Tight tolerance model.  For the other tolerances, please check out the other versions of the model below:

Medium Tolerance Sleek-Eyed Bone Snake: Coming Soon
Loose Tolerance Sleek Eyed Bone Snake: Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Sleek-Eyed Bone Snake, be sure to check out it’s sibling Round-Eyed Bone Snake:
Tight Tolerance Round-Eyed Bone Snake: Coming Soon
Medium Tolerance Round-Eyed Bone Snake: Coming Soon
Loose Tolerance Round-Eyed Bone Snake: Coming Soon


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


Sleek-Eyed Bone Snake - Articulated Snap-Flex Fidget 

Christmas Ornament Plushy Swirls 005

Plushy Swirls 005.stl

Acorn Pal

Acorn Pal Base.3MF

usa eagle bird 6 wall art home decor

usa eagle bird 6.stl

Sword Wall Mount / 3mf included

SWORD WALL MOUNT 2.stl

Voronoi pen holder / Easy print / 3mf included

VORONOI PEN HOLDER.stl

Skull Tealight - Sculpture - No Supports!

Skull_solid.stl

pumpkin wall art autumn wall decor thanksgiving decoration

Celebrate the charm of autumn with our Pumpkin Wall Art, a warm embrace of fall's bounty. This piece was inspired by the nostalgia of pumpkin patches and the simple joys of the season. 🎃🖼️🍁

Goofy Skulls Skull Bowl/Planter

GoofySkulls_Skull-PlanterBowl.stl

Decor

Most Popular this Year

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Crumpled Vase

Flexi Skeleton Spider | Articulated Spider NO Support

Vine Ball Home Decor

MINIMALIST MULTI INCENSE STICKS ASH HOLDER

2 puppies with a heart.stl

Bat Skull

Howler Monkey Skull (Pre Supported)

Minimalist Chubby Pug Sculpture, Chubby Pug Statue

Halloween Swirl Skull Planter-Bowl

Demon Skull Wall Hook

Short Bony Basilisk - Articulated Snap-Flex Fidget (Tight Joints)

Sleek-Eyed Bone Snake (Tight) - Articulated Snap-Flex Fidget

Christmas Ornament Plushy Swirls 005

Acorn Pal

usa eagle bird 6 wall art home decor

Sword Wall Mount / 3mf included

Voronoi pen holder / Easy print / 3mf included

Skull Tealight - Sculpture - No Supports!

pumpkin wall art autumn wall decor thanksgiving decoration

Goofy Skulls Skull Bowl/Planter