**Vase Mode, No Supports, Quick Print**
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints**  

**Check out a spookier pendant light here
Faces of Death - Pendant Light, Vase Mode: https://than.gs/m/1046980**

The Flustra (Fluss-truh) Pendant Light brings a modern vibe with a subtle twist

The clean, ribbed design complements a wide range of aesthetics, while the ripples underneath evoke a more dynamic sense of motion.


**Model Details:**
You can start printing this model right away on a Bambu printer using the prepared 3mf file optimized for printing this model.

This model is designed to fit this Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Assembly Instructions**
Refer to the video in the image carousel

**Other Home Decor:**
**The Hestra - Pendant Light, Vase Mode: https://than.gs/m/1042357
The Trysta - Pendant Light, Vase Mode: https://than.gs/m/1042457
The Stria - Pendant Light, Vase Mode:   https://than.gs/m/1042321
The Scura - Pendant Light, Vase Mode: https://than.gs/m/1046091**



**Safety First**
Intended for use with **9 watt LED Lights**  
Other lights can get too hot and damage/deform the plastic

**Print Settings:**
Vase Mode/Spiralize/Spiral Vase Mode
0.55 mm wall thickness
8 bottom shell layers
Print with the circular cut-out on the build plate

**100% Scale**
Attempting to scale this model up or down will prevent the opening from fitting the intended Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

Please let me know if you would like to see other variations of this lamp.


The Flustra - Vase Mode Pendant Light (Large), STL & Bambu 3MF

The Flustra - Vase Mode Pendant Light (Large)_Bambu by Mimetics3D.3mf

📥 INSTANT DOWNLOAD – DIGITAL PRODUCT
No physical item will be shipped.
⭐️ Instant delivery:
Once your payment is confirmed, you’ll get immediate access to the STL file. After purchase, simply click “View your files” to go to the download page.
⭐️ Included files:
Each purchase contains:
• 1 STL file (single-piece model)
⭐️ Compatibility:
Works with all 3D printing slicers, including:
• ****
• PrusaSlicer
• Bambu Studio
• Creality Print
• Simplify3D
• Lychee
• Any software that supports STL files
🛠️ Editable file:
You can scale or modify the model within your slicer or 3D modeling software.
⭐️ Commercial use allowed:
You may print and sell unlimited physical products made from this file.
⚠️ Reselling, sharing, or redistributing the digital STL file is strictly prohibited.
⭐️ Support:
If you need help or have any questions, feel free to message us — we’re here to assist you!
⚠️ Please ensure your printer and software support STL files before purchasing.

Useful Resources for Local 3D Printing Sellers

If you run a local business and need simple 3D models (figures, keychains, cutters, multilayer designs, etc.) to print and resell physically, I’ve enabled a subscription option on Thangs where you can download up to 30 files per month, choosing freely from the entire catalog.
Rollover system — your unused downloads stack up 🔄

It’s designed for makers who need a steady variety of designs without purchasing each file individually every time.

⚠️** Limited slots**
This plan is designed for creators who need a constant flow of ready-to-print STL models for physical resale.
If the slot shows as available, it means there is still space. If it becomes full, you will need to wait for the next opening period.

Designed for 220x220 mm beds — feel free to resize the model as needed.

Below are the printing settings I personally use.
These parameters prioritize detail and consistency, and may serve as a helpful reference for your own setup:

Infill: 20% (draft)

Nozzle: 0.4 mm for better detail

Material: PLA at 200

Print speed: 180

Wall speed: 90

Every printer and filament can behave differently, so slight adjustments might be necessary depending on your machine, environment, and preferred finish.

 Merry Christmas Text Ornament STL

D719.stl

Snowman with Hat STL

D718.stl

Reindeer Holiday Ornament STL

D703.stl

Christmas Cat with Gift STL

D693.stl

📥 INSTANT DOWNLOAD – DIGITAL PRODUCT
No physical item will be shipped.
⭐️ Instant delivery:
Once your payment is confirmed, you’ll get immediate access to the STL file. After purchase, simply click “View your files” to go to the download page.
⭐️ Included files:
Each purchase contains:
• 1 STL file (single-piece model)
⭐️ Professional quality:
High-resolution STL designed for clean slicing, sharp details, and excellent print results. Compatible with both FDM and resin printers.
⭐️ Compatibility:
Works with all 3D printing slicers, including:
• ****
• PrusaSlicer
• Bambu Studio
• Creality Print
• Simplify3D
• Lychee
• Any software that supports STL files
🛠️ Editable file:
You can scale or modify the model within your slicer or 3D modeling software.
⭐️ Commercial use allowed:
You may print and sell unlimited physical products made from this file.
⚠️ Reselling, sharing, or redistributing the digital STL file is strictly prohibited.
⭐️ Support:
If you need help or have any questions, feel free to message us — we’re here to assist you!
⚠️ Please ensure your printer and software support STL files before purchasing.

These parameters prioritize detail and consistency, and may serve as a helpful reference for your own setup:

Infill: 20 (draft)

Nozzle: 0.4  for better detail

Material: PLA at 200

Print speed: 180

Wall speed: 90

Every printer and filament can behave differently, so slight adjustments might be necessary depending on your machine, environment, and preferred finish.

Corazón con Texto LOVE – Heart LOVE Sign STL – Romantic Decor 3D Print

D256.stl

Texto WISH – Wish Word Art STL – Inspirational Typography 3D Print

D253.stl

Cuadro de Cebra – Zebra Wall Art STL – Safari Relief 3D Print D251

D251.stl

Add a touch of holiday magic with the Holiday Custard! ✨

Part of my "12 Days of Holiday Desserts" series, this custard container is perfect for storing tiny treasures or adding a festive, playful vibe to your decor. It's functional, fun, and a little piece of holiday joy you can print at home!

**Whether you're using an AMS or non-AMS printer, I’ve made it easy to print with options for both.**

**Print Settings**
- A brim isn't necessary but I like using it 
- Supports aren’t needed if the top is printed with the flat part on the build plate. Refer to the 3MF file for orientation..
- 10% infill
- 2-3 walls
- 0.4mm nozzle
- 0.12mm to 0.2mm layer height
- Use 3MF file if you want to use your AMS

**PLA Used:**
Pink: https://amzn.to/3CbNBFa
Peach: https://amzn.to/3UywLqh
Sage Green: https://amzn.to/48t2JK4
Dark Yellow: https://amzn.to/4fEIxYf

**Assembly:**
https://youtu.be/ls6QJfQ_ffo


Holiday Custard Container - Jewelry Box and Gift Holder - 3/12 Holiday Desserts

pixelandpapier__holiday_custard__bottom.stl

Discover the ultimate blend of functionality and artistic flair with our Retro-Inspired Stackable Storage Pods. Whether you view them as chic sculptures or essential organizers, these pods are designed to maximize your space without compromising on style. Inspired by the natural forms of cacti, each pod features a seamless stacking capability, allowing you to build and customize your storage solution vertically, saving precious counter or desk space.

Choose from three uniquely shaped bases—boomerang, flower, or disc—to create a personalized arrangement that suits your decor and organizational needs. The distinct shapes not only add a touch of retro charm but also provide a stable foundation for your stackable ensemble. Perfect for small knick-knacks, office supplies, or even as a decorative element in any room, these Storage Pods merge practicality with the whimsy of design. Elevate your organizing game with a system that's as visually intriguing as it is functional.

**Print Settings**
- No brim needed.
- No supports are needed.
- 10% infill
- 2-3 walls
- 0.4mm nozzle
- 0.08mm to 0.12 with variable layer height

**Assembly**: https://youtu.be/Anb2tB9c0Ew



Retro-Inspired Stackable Storage Pods: Organic Sculptural Shapes, Space-Saving Multi-Use Organizer

pixelandpapier__storage_pod__pod.stl

**Vase Mode, No Supports, Quick Print**
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints**  

 
**Check out the latest 3 table lamps here:
Stria Table Lamp: https://than.gs/m/1049903
Trysta Table Lamp: https://than.gs/m/1049896
Hestra  Table Lamp: https://than.gs/m/1049906**


_Twisting waves of passion move beneath your calm, organized exterior.  The Hestra is for you_
 
The Hestra (Hess-truh) Table Lamp brings a modern vibe with a subtle twist

The clean, ribbed design complements a wide range of aesthetics, while the six underlying waves evoke a more dynamic sense of motion.

_Why hide who you are?  Let your passion shine through_



**Model Details:**
You can start printing this model right away on a Bambu printer using the prepared 3mf file optimized for printing this model.

This model is designed to fit this Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Assembly Instructions**
Refer to the video in the image carousel

**For some fun pendant lights, check out:
Faces of Death - Pendant Light, Vase Mode: https://than.gs/m/1046980
The Flustra - Vase Mode Pendant Light (Large): https://than.gs/m/1047316**


**Safety First**
Intended for use with **9 watt LED Lights**  
Other lights can get too hot and damage/deform the plastic

**Print Settings:**
The lamp shad prints in Vase Mode/Spiralize/Spiral Vase Mode
The Base and cap print regularly without supports.  
**The base should be printed upside down**
0.55 mm wall thickness
8 bottom shell layers
Print with the circular cut-out on the build plate

**100% Scale**
Attempting to scale this model up or down will prevent the opening from fitting the intended Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

Please let me know if you would like to see other variations of this lamp.


Hestra Table Lamp - Vase Mode STL and Bambu 3MF

The Hestra - Vase Mode Pendant Light Bambu by Mimetics3D.3mf

**Print-In-Place, No Supports, Articulating Fidget Toy**
**Bambu 3MF For Multicolor Printing**
 
Looking to hang out with your gnomies on St. Patricks Day?

This St Patty's Flexi Gnome is getting some stretching in to prepare for the celebrations.


He has 2 separate poses.  He can:
- Sit in a split-leg position
- Stand straight up on 2 legs


While waiting on some test prints of more complicated Snap-Flex designs, I started playing around with simpler flexis for sculpting practice.  I realized that there are other ways to make fun posable models, and that not ALL of my models need to be Snap-Flex designs.

**Check out some other simple flexis here:**

**Flexi Pug - Articulated Dog, Style #1: https://than.gs/m/1027312
Flexi Pug - Articulated Dog, Style #2: https://than.gs/m/1027678
Flexi Pug - Articulated Dog, Style #3: https://than.gs/m/1027452**

For more fun, check out the regular version and another St. Patrick's Day design:
**St Patty's Flexi Gnome - Articulated Fidget Toy: https://than.gs/m/1030343**
**Little Lucky Rubber Ducky, a St. Patty's Leprechaun Duck - https://than.gs/m/1024753**

Models like this give me an opportunity to continue building my skillset and releasing models while I wait for my printers to finish prototypes of more complex designs.


Please be sure to check out my other articulated dragon and articulated snake designs.

**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints of your cool new friend.**

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
**Good Bed Adhesion Required - Consider using glue stick** or a brim


Multicolor St Patty's Flexi Gnome - Articulated Fidget Toy (Bambu 3MF)

StPatricks_StPattysLeprechaunGnome_Multicolor.3mf

Hold onto your butts! 
This shadow box features the famous T-Rex escape scene from the original Jurassic Park movie. Each layer is 3D printed in a separate color and then stacked on top of each other to create the illusion of depth. Add the toy vehicle to make it more like a diorama. The exterior features screw holes in the back and top if you want to hang it on a wall. It also looks great just sitting on a desk or shelf. 

 

Assembly Instructions
Print each part using the color recommendations provided. Print out 6 of the square spacers. PLA filament was used but other materials may work as well. You will need white paper, scissors, and glue. 

 

1.) Lay box shell on flat surface with opening face up. Make sure screw holes are positioned upright. 

2.) Cut out small piece of white paper to fit into shell. Glue into place. This white layer will serve as the moon. 

3.) Place blue sky layer inside shell on top of the white paper. Glue into place. Wait for glue to dry. 

4.) Add spacers to corners. Glue into place. Wait for glue to dry. 

5.) Add square spacer layer. Glue into place. Wait for glue to dry. 

6.) Repeat steps with the remaining layers in this order: Clouds, Mountains, Plants Back, Dino, Plants Front, Fence. Be sure to place the 4 corner spacers and the square spacer between each layer. Glue everything in place. Wait for glue to dry between each layer. 

7.) Add the lid with glue to seal it shut. Wait for everything to dry. 

8.) Stand the box up and place the car ramp in front of it with your choice of vehicle (not included). 

 

You can also make the secondary version of this diorama by not using any of the spacers. That way there is more room inside the box to fit both the ramp and the vehicle!

Jurassic Shadow Box Diorama

Jurassic Shadow Box.3mf

**Design Concept**
The elegant deer planter sculpture brings a sophisticated touch to home decor. Inspired by classical sculpture with a modern twist, the deer features intricate embossing design with golden embellishments that highlight its artistic value.


This beautiful deer planter is perfect for holding your plants or small items. It has a smooth green design with golden details, making it look very elegant and stylish. It fits well in any room and adds a natural touch to your space.


**Suggested Uses:**

* Desk decor

* Indoor planter

* Gift for nature lovers

* Living room decoration

* Office ornament


**Function**
This planter is both decorative and functional, designed to hold small plants or succulents. It adds a stylish aesthetic to living rooms, balconies, or indoor garden spaces.

**Printing Suggestions**
To achieve the best quality, use fine resolution settings. Opt for PLA or a similar material in finishes compatible with paint to highlight intricate details. Supports are necessary for antlers and delicate features.

**Assembly Instructions**
The model is printed in one piece, ensuring easy set-up. After printing, apply a clear coat to preserve the intricate detailing, particularly the golden accents.





Elegant Deer Planter Sculpture for Home Decor.stl

📥 INSTANT DOWNLOAD – DIGITAL PRODUCT
No physical item will be shipped.
⭐️ Instant delivery:
Once your payment is confirmed, you’ll get immediate access to the STL file. After purchase, simply click “View your files” to go to the download page.
⭐️ Included files:
Each purchase contains:
• 1 STL file (single-piece model)
⭐️ Professional quality:
High-resolution STL designed for clean slicing, sharp details, and excellent print results. Compatible with both FDM and resin printers.
⭐️ Compatibility:
Works with all 3D printing slicers, including:
• ****
• PrusaSlicer
• Bambu Studio
• Creality Print
• Simplify3D
• Lychee
• Any software that supports STL files
🛠️ Editable file:
You can scale or modify the model within your slicer or 3D modeling software.
⭐️ Commercial use allowed:
You may print and sell unlimited physical products made from this file.
⚠️ Reselling, sharing, or redistributing the digital STL file is strictly prohibited.
⭐️ Support:
If you need help or have any questions, feel free to message us — we’re here to assist you!
⚠️ Please ensure your printer and software support STL files before purchasing.

These parameters prioritize detail and consistency, and may serve as a helpful reference for your own setup:

Infill: 20 (draft)

Nozzle: 0.4  for better detail

Material: PLA at 200

Print speed: 180

Wall speed: 90

Every printer and filament can behave differently, so slight adjustments might be necessary depending on your machine, environment, and preferred finish.


Decor

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

The Flustra - Vase Mode Pendant Light (Large), STL & Bambu 3MF

Merry Christmas Text Ornament STL

Holiday Custard Container - Jewelry Box and Gift Holder - 3/12 Holiday Desserts

Retro-Inspired Stackable Storage Pods: Organic Sculptural Shapes, Space-Saving Multi-Use Organizer

Hestra Table Lamp - Vase Mode STL and Bambu 3MF

Multicolor St Patty's Flexi Gnome - Articulated Fidget Toy (Bambu 3MF)

Jurassic Shadow Box Diorama

Elegant Deer Planter Sculpture for Home Decor.stl

Florero Decorativo – Decorative Flower Vase STL