1S Battery Voltage Checker - PH2.0

Fpv Racing RR210 Frame  - Feet

Box for Chorus RF Laptimer

Orbital Defence Node Controller

Your Orbital Defence Grid is made up of Orbital Nodes that are armed up to defend your home world from intruders. There are a lot of them up there, and those nodes need Controllers like this one! This Controller Node takes instructions from the ground and relays it to lesser nodes. It defends, monitors, and redirects as necessary.

Whoop or E010 Camera Mount

SourceX Antenna Mount for Big VTX with FAN

I modified the one that was already on Thiniverse so that it would better allow the fan of my Big AKK VTX to have maxium effect.
This model allows full flow of air accross the fan and the top of the VTX unit.
The AKK VTX unit is mounted to the top plate of the SourceX frame to allow easy access to the buttons of the VTX.
the 2812 LED Controller fits under it and allows access to the buttons.
its a remix but I can't find a link to the original file.

Crustacean Servitors (Pre-supported)

STL_Lemurian Servitor1 54_Supported.stl

DJI MINI 5 PRO ULTRA COMPACT HARDCASE

Mini 5 Pro Hardcase Part B v1.step

Bayraktar TB2 – 1:25 Scale Model

Stand.stl

Republic XF-103 Thunderwarrior

1-200-Landing-Republic_XF103.stl

1/200 (Landing Mode) (x1) White Matte Plastic

1/200 (Landing Mode) (x1) Gray Matte Plastic

1/285 (Landing Mode) (x2) White Matte Plastic

1/350 (Landing Mode) (x1) Tan Fine Detail Plastic

1/285 (Landing Mode) (x2) Gray Matte Plastic

1/700 (Landing Mode) (x6) Tan Fine Detail Plastic

1/160 (Landing Mode) (x1) White Matte Plastic

1/700 (Landing Mode) (x6) Clear Ultra-Fine Detail Plastic

1/160 (Landing Mode) (x1) Gray Matte Plastic

1/350 (Landing Mode) (x1) Clear Ultra-Fine Detail Plastic

1/600 (Landing Mode) (x6) Tan Fine Detail Plastic

1/400 (Landing Mode) (x2) Tan Fine Detail Plastic

1/144 (Landing Mode) (x1) White Matte Plastic

1/500 (Landing Mode) (x4) Tan Fine Detail Plastic

1/600 (Landing Mode) (x6) Clear Ultra-Fine Detail Plastic

1/144 (Landing Mode) (x1) Gray Matte Plastic

1/400 (Landing Mode) (x2) Clear Ultra-Fine Detail Plastic

1/500 (Landing Mode) (x4) Clear Ultra-Fine Detail Plastic

1/200 (Landing Mode) (x1) Tan Fine Detail Plastic

1/100 (Landing Mode) (x1) White Matte Plastic

1/100 (Landing Mode) (x1) Gray Matte Plastic

1/200 (Landing Mode) (x1) Clear Ultra-Fine Detail Plastic

1/87 (Landing Mode) (x1) White Matte Plastic

1/87 (Landing Mode) (x1) Gray Matte Plastic

TBS SourceX GPS holder

This is a GPS Holder for the TBS Source X drone.

2S4ILR_prints.stp

Plates to mill for my 2S 4in Long Range FPV quad

SILENT RUNNING 1/24 DRONE CONCEPT

SILENT RUNNING 1_24 DRONE CONCEPT.stl

SILENT RUNNING 1_24 DRONE CONCEPT - Grey Plastic

Sky-Hero Anakin - Buzzer Holder

Battery Holder for RaGG-e Whoop frame

TBS SourceX Camer Control holder

At the bottom of the TBS SourceX frame there is a square hold below the FPV Camera.
This is a great spot to put a camera control for the FPV Camera. It fits in nice and tight and the control unit goes in on top. Then screw in the top pad part.
The pad allows the buttons to be pushed but keeps the unit water resistant from Rain. etc.
to make a better seal just put sold glue at the front and sides between the two parts.
Fits the Foxeer Camera 5 button perfectly, but will also fit other models. 
Print with TPU so that you can use the buttons.

DRONE

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

1S Battery Voltage Checker - PH2.0

Fpv Racing RR210 Frame - Feet

Box for Chorus RF Laptimer

Orbital Defence Node Controller

Whoop or E010 Camera Mount

SourceX Antenna Mount for Big VTX with FAN

Crustacean Servitors (Pre-supported)

DJI MINI 5 PRO ULTRA COMPACT HARDCASE

Bayraktar TB2 – 1:25 Scale Model

Republic XF-103 Thunderwarrior

TBS SourceX GPS holder

2S4ILR_prints.stp

SILENT RUNNING 1/24 DRONE CONCEPT

Sky-Hero Anakin - Buzzer Holder

Battery Holder for RaGG-e Whoop frame

TBS SourceX Camer Control holder

storage box for X2D case Lid.stl

Fpv Racing RR210 Frame - Gopro Action Camera Holder

Bayraktar Kızılelma - 1:40 Scale Model

Bayraktar Akıncı - 1:42 Scale Model