Pixel Art - Picture Frame Kit | No Supports, No AMS, No Glue

Plate 1 - Any Color (NO INFILL).stl

PERSPEKTIVA Small Dish // 85x115x35mm

PERSPEKTIVA_SmallDish_85x115x35.stl

TPMS Finial Ornament - Vertical Gyroid

TPMS Finial Ornament - Vertical Gyroid.stl

Vine Christmas Tree

vine_christmas_tree.stl

Hollow Knight Hornet - Wall Decoration

Hollow Knight Hornet - detailed.stl

Snowfall, Winter Dragon Child - Articulated Dragon Snap-Flex Fidget (Tight Joints)

Snowfall_Tight.stl

Starburst Christmas Ornament

**ABOUT THE DESIGN**
This is a new variation on my Christmas Balls with Integrated Stems and diamond patterns.

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**RESIZING**
These should scale up well, but I'm not sure how much smaller you could print them using a consumer FDM printer. Using a resin printer, you could probably print them much smaller.

**PRINT TIME**
About 4.5 hours.

**PRINT SETTINGS**
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height. I decreased the print temp from my usual 200 to 190 for this, decreased the flow from 115 to 105, and increased the outer wall speed from 20 to 30 mm/sec. That was enough to go from stem that was molten goo to one that printed perfectly.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 – 0.8 mm.

I had the best results using Cura setting the default width to 0.4 mm with an alternate extra wall. 

*Infill*
This does not need any infill. JUST DON'T DO IT.

*Speed*
* Outer Wall: 30 mm/sec
* Inner Wall: 30 mm/sec
* Top/Bottom Speed: 30 mm/sec
* Travel Speed: 50 mm/sec

*Build Plate Adhesion*
I relied on the supports for build plate adhesion. 

*Supports*
You will probably need supports for both bed adhesion and the overhang on the first few layers. You shouldn't need supports for the loop at the top. Adding them would just increase the chances the supports broke and caused the print to fail. 

* Support Structure: Normal
* Support Placement: Touching Buildplate
* Support Overhang Angle: 49 Degrees

I added a support blocker 75 mm x 75 mm x 110 mm set 15 mm above the build plate so that the supports would only be added to the bottom of the ornament.

Diamond Lattice Christmas Ball

Owl Candy Bowl

OwlbowlSTL.stl

Batwing Ornament - Batman - Christmas Day 9

batwing-ornament-top.stl

Happy Lil Reindeer & Sleigh - Articulated Snap-Flex Fidget (Tight Joints)

HappyLilSleigh_Tight.stl

Initiate Knight's Sword - Welcome Pack Prop Kit | No Supports, No AMS, No Glue

Fossil Grey 1.stl

Kiln Crafter Knight - Welcome Pack Chunkable Kit | No Supports, No AMS, No Glue

Cotton White.stl

Articulated Dragon Keychain 020

ARTICULATED DRAGON KEYCHAIN 020 - WITH RING.stl

Boo Bear.stl

Here is the model for Boo Bear.

Boo is a good but spooky Friend of Barry, and like his friend he seems to just want to be your friend (but i would keep an eye on him), do you have space for Boo? maybe he can keep Barry Company.

I hope you enjoy, and Happy Halloween

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

https://www.buymeacoffee.com/bugman140

DECORATION

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Pixel Art - Picture Frame Kit | No Supports, No AMS, No Glue

PERSPEKTIVA Small Dish // 85x115x35mm

TPMS Finial Ornament - Vertical Gyroid

Vine Christmas Tree

Hollow Knight Hornet - Wall Decoration

Snowfall, Winter Dragon Child - Articulated Dragon Snap-Flex Fidget (Tight Joints)

Starburst Christmas Ornament

Owl Candy Bowl

Batwing Ornament - Batman - Christmas Day 9

Happy Lil Reindeer & Sleigh - Articulated Snap-Flex Fidget (Tight Joints)

Initiate Knight's Sword - Welcome Pack Prop Kit | No Supports, No AMS, No Glue

Kiln Crafter Knight - Welcome Pack Chunkable Kit | No Supports, No AMS, No Glue

Articulated Dragon Keychain 020

Boo Bear.stl

Ghost Booh

Buddy Bear

Octopus Tentacle Wine Bottle Holder / No Supports

Chunky Jawa - Star Wars Kit | No Supports, No AMS, No Glue

SECRET PICKLE

Kris Bear