Bike Polo Mallet shaft to bike grip adaptor

have you ever been a bit over using a bike pump to get those golf grips on your polo mallet? 
Has your hand ever become tired from gripping that 16mm Mallet? 

solutions ahoy! 

Polo shaft 16mm - bike grip 22.2mm adaptor. 

scale up the Z axis in your slicer for longer or shorter versions. 

You could even scale the XY to fit an old Brutus shaft too. or let me know and ill update a model. 

Bike Polo shaft to bike grip adaptor LW v4.stl

Rear light holder for bike saddle

Light_holder_2.stl

Bike Polo Valve saver V4.stl

Ever had a ball smash your valve off and wished you had those nice roger valve savers??  

Sick of the duct tape and zip tie look?

this will probably stop your valve from getting knocked off and look cool doing it. 

It's mostly friction fit. so no extra valve stem nuts are needed to hold it in place.
you could scale up the Z-axis if you want to make it taller + stronger... but heavier.

enjoy and have fun - print some pretty colorful ones and show how it looks on your bike! 

Printer:
Any

Material:
Any - I've used PC, Nylon, Nylon12, PETG, PET, and PLA so far. all work fine. 

Rafts:
No

Supports:
No

Resolution:
0.1mm ~0.3mm
anything is fine. 

Infill:
0

WALLS:
8

Notes:
this print is designed to be all walls and no infill. You can play with this if you want but I'm using all walls for strength. 
 

animal bmx valve cap

RockShox PIKE air cap

Air cap for your fork.
PS you need to tap treads into it

TireBooster Mount to JoeBlow Track Pump

TireBooster_JoeBlow_TOP.3mf

Fahrradhalter

2xGrundhalter - Version 2

Laser Implala visor bolt

Lazer Impala visor bolt.3mf

Cover and USB Plug for Power Bank External Battery Pack

Power Bank Cover v2.stl

GoPro Clones Open Mount Camera Retainer.stl

I needed to come up with a retainer for the general purpose open camera mount provided with my camera to prevent the camera from falling out on rough roads. I've dropped a camera twice before, lost a camera the second time! The solution I came up with slides over the raised brass insert housing on the bottom of the mount, and is secured with a M6 bolt. I went with a nylon 1/4-20 x 1/2" bolt (couldn't find one shorter locally) and two thick nylon washers as spacers. (The longer than needed bolt may come in handy should I decide to add a feature to the mount later on.)

The best orientation in the slicer is for the bottom of the retainer to be placed on the bed. In Cura I suggest using Tree Support. A brim or raft is also recommended.

Resolution: 0.20 mm
Walls: 2
Infill: 15%+, Gyroid
Support: Yes, Tree support recommended
Raft: Your choice
Brim: Your choice
Filament: PETG, ASA, ABS


GoPro 130mm Straight Extension

I needed to mount my Akasa Action Sport Camera above and beyond my underseat bag so that the Power Bank battery could be placed in the rear pouch of the bag and a short USB cable could be run from the battery to the camera. So I designed this simple 130 mm extension that connects GestoPlastico's (https://www.thingiverse.com/thing:2598431) seat rail clamp to the camera mounting hardware. The extension rests on the bag for added support.

Bike Vase

BIKE VASE_CLAMP ON.stl

MTB Wall Mount

Pedal Mount.3mf

telepass nuovo22.stl

simple  handlebar (dia 22mm) support for new italian telepass

bmx bashguard concept

bmx barends

headset cap(integrated bmx)

JoeBlow Bike pump Schrader end screwcap.stl

I lost this little piece on my Joe Blow bicycle pump. 

Bicycle prosthetic foot grip

I have two prosthetic legs, and the main issue with riding an electric bicycle is to keep both prosthetic feet solidly on the pedals throughout a revolution.  
The other problems to solve are, how to make it easy to step into the "foot holder" and have it grip me enough. But still make it easy for me to extract myself quickly in case I have to stop quickly.
I cant twist my ancle to use the classic twist lock and I also want to be able to use the shoes that I wear at the time, when riding the bike. 

I limit myself to cargo bikes with three wheels, so this helps with the balance while stopping. 

These challenges led to this "Dutch Clog" design, that are maybe not the most sexy look, but they work very well with my prosthetic setup. 

FootHolder2 v4.3mf

Bike hall cover v7.stl

Del Sol E-Bike hall sensor on rear frame.
My bike is a Lxi Flow, but it might fit others. I had a stick go in the spokes and rip out my wore, this should protect it in the future. 

Cycling

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Bike Polo Mallet shaft to bike grip adaptor

Rear light holder for bike saddle

Bike Polo Valve saver V4.stl

animal bmx valve cap

RockShox PIKE air cap

TireBooster Mount to JoeBlow Track Pump

Fahrradhalter

Laser Implala visor bolt

Cover and USB Plug for Power Bank External Battery Pack

GoPro Clones Open Mount Camera Retainer.stl

GoPro 130mm Straight Extension

Bike Vase

MTB Wall Mount

View 11 new models

bmx bashguard concept

bmx barends

headset cap(integrated bmx)

JoeBlow Bike pump Schrader end screwcap.stl

Bicycle prosthetic foot grip

Bike hall cover v7.stl