Give your [IKEA VAPPEBY](https://www.ikea.com/se/en/p/vappeby-bluetooth-speaker-white-gen-3-80517377/) Gen3 Speaker a sophisticated transformation with this GRID kit. This download includes the pictured Cover, Volume Dial (+ Bonus Studio Dial), and Grid Handle. (The power button can be downloaded seperately [here](https://than.gs/m/1274542?affiliateCode=MAKE))

---

**_Printing Guidelines_**

**Handle:**
- 0.16 mm layer height
- 4+ walls, 15%+ infill (use your discretion to make a strong part depending on the filament you use)
- No supports required

**Volume Dial and Cover:**
- 0.16mm layer height
- 2 walls, 15% infill
- No supports required
- For the Volume Dial, start with an opaque filament, and swap to a transparent filament above 2.4mm if you want the sides to light up (I also did a few layers of Black between the white and green to block more light from the front)*

          *For the Studio Dial, start with an opaque filament, and swap to a transparent filament above 8mm (at Z height 11mm if you want it to line up with the cover)

---

**_Assembly_**

**Handle:**
- Use the original screws for the stock VAPPEBY handle to connect this part
- Do not overtighten the 3D printed screw. That will cause the layers to be ripped apart.

**Cover:**
- Print four of the cover pins. Connect them to the back corners of the cover with a 1/4 twist clockwise (You can use pliers if the fit is tight).
- Cover should press fit into the existing rubber holes on the speaker.

**Studio Dial:**
- Optionally print the 'Studio Dial_Indicator' in another color and glue it into the divot on the Dial for an orbiting indicator (the orange dot shown in the photos).

_Feel free to leave a comment if you have any questions!_

---

**Filaments Used in Photos:**
- [Elegoo Rapid PLA+ White and Black](https://shrsl.com/4vqfx) (Also on [Amazon](https://amzn.to/4iioPSQ))
- [Bambu PETG Translucent 'Olive Green'](https://shrsl.com/4vz09)

**Printer Used:**
- [Qidi Plus4 3D Printer](https://qidi3d.com/products/plus4-3d-printer?sca_ref=6089281.BQS8d0sJuF) (Also [on Amazon](https://amzn.to/4jON7VK)) 

*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_*. 

IKEA VAPPEBY GRID Kit // Cover, Volume Dial, and Handle

VAPPEBY_Cover_Grid.stl

**Introducing Decor N' Store!** A new, fun, modular decor and storage system ALL IN ONE! Create customizable decor, that doubles as practical storage, or even turn it into a LED lamp! With multiple designs to choose from, the options are endless! The question is, how will YOU Decor N' Store?

Modular inserts make this easy to assemble and customize to your hearts content! Create one of the designs below or mix and match to make your decor n' store as unique as you!

**INSTRUCTIONS**

Its as easy as printing 3 pieces: Base, Insert and Lid! Just slide the male end of the insert into the female groove of the base piece for it to sit in place. Stack inserts and the lid the same way.

**Note**: there are 2 versions of each base (LED/NO_LED). No_LED if you just want to make the storage containers standalone. If you want to print the LED lamp version, please print the base with _led at the end of the name. Those files have the cutout for the power wire.

4 Designs Available:
-Fluted
-Knurled
-Bubbles
-Wavy
(More designs can be added if there is interest!)

For LED lamp version: These LED's and controller are what I used in the video below, but feel free to use what you like: 

-LED rings:

https://www.amazon.com/Integrated-Drivers-forArduino-Raspberry-ESP8266/dp/B08PCLYT7J?pd_rd_w=9UBVU&content-id=amzn1.sym.c82e8d5f-baa6-4f2a-894c-1a07d5f5bab0&pf_rd_p=c82e8d5f-baa6-4f2a-894c-1a07d5f5bab0&pf_rd_r=65A2G8P66S8XP753NZYH&pd_rd_wg=w9sCh&pd_rd_r=8c04e428-2c01-4770-bd8b-b8649e94b912&pd_rd_i=B08PCLYT7J&psc=1&ref_=pd_bap_d_grid_rp_0_1_t

-Controller: 

https://magwled.com/products/dgrz-led-cpd-36-1-mini

**PRINT SETTINGS**
For Base, Insert and Lid (Non-led version) :

Perimeters: 2-3
Layer height: 0.2-0.25mm
Infill: 10-15%
No supports needed! (print with male end of insert upward)

For divided storage insert:

Infill: 25-50%
Perimeters: 3
0.2mm layer height
(There are grooves on each end of the top surface that friction fit fairly easily into the insert pieces ONLY! Please do not use these with the bases or lids. If tolerance issues make it too loose/tight to fit into the insert, please adjust the scale of the part by 1% in either direction until fitting!. If problems still occur, please let me know and I can look into adjusting the tolerances. You should print this on a printer with good tolerances. )

For LED Lamp:

Base can be printed as above
Suggested to print insert and lid with 0-5% infill
Layer height: 0.2-0.25mm
3-4 perimeters
4-5 bottom layers
(NOTE: recommend printing on a machine with decent/ good bridging since there is no infill printed. You can print LED diffusers with some infill, you''l just have infill peaking thru the light.) 

Last note: Tolerances should be adequate for pieces to fit into one another fairly freely. 
If too tight, please adjust scale by +1%. If still having issues, please let me know and I can look into adjusting the tolerances.

Please refer to the video for more information! Happy printing!






Decor N' Store

fluted base_led.stl

Visit [JERRARI3D.com](https://www.jerrari3d.com/)  
For instructions and a complete look at the entire GEN2 collection.  
__________________________________________________

### The GEN2 Modular System
The GEN2 Modular System is a 3D printable storage solution offering ultimate flexibility and customization. Perfect for home users, hobbyists, and small businesses, it lets you print exactly what you need and customize each piece to match your unique style and space.  

Unlike store-bought sets, GEN2 lets you print only what you need and expand your setup whenever you want. The drawers snap together seamlessly, giving you unlimited expansion possibilities. With the unique QuickLock mechanism, rearranging or relocating drawers is quick and effortless—so your storage can grow and adapt with you.  

---

### GEN2 Chevron Series
Where 3D printing meets home design, bringing the signature GEN2 modular system into spaces beyond the workshop. With its clean, angled pattern and subtle texture, the Chevron faceplate adds a modern, furniture-like touch whether it’s organizing coffee pods, craft supplies, or small tools.  

Designed for full customization, each faceplate supports your choice of handle or knob attached with standard M3 screws, letting you tailor both function and style. From carbon-fiber-infused prints that pop on a workbench to soft neutral tones that complement a kitchen counter, the Chevron Series proves that 3D-printed storage can look at home anywhere.  

---

### What You’ll Need
**BASE DRAWER MODELS**  
• GEN2 Decor Drawers – Standard – [DOWNLOAD](https://than.gs/m/1116945)  

**HANDLES / KNOBS**  
• BlockBar Series – [DOWNLOAD](https://than.gs/m/1116949)  
• Crystal Series – [DOWNLOAD](https://than.gs/m/1134382)  
• Deco Handle / Knob Collection – [DOWNLOAD](https://than.gs/m/1159960)  

**HARDWARE**  
Includes affiliated links to help support my projects:  
• Filament – [Poplar Wood Filament](https://amzn.to/3X0rYzz) (used in many of my photos). Use a hardened nozzle for abrasive filaments.  
• M3 nuts and screws – Stainless-Steel or Steel (screw length may vary depending on your faceplate and drawer combo—kits like [this one](https://amzn.to/3LSaQFv) offer a variety of lengths to help you find the perfect fit).  

---

### Optional Accessories
Take your Decor setup even further with compatible accessories and inserts:  
• K-Cup Insert – Perfect for coffee stations and home setups – [DOWNLOAD](https://than.gs/m/1159960)  
• Additional GEN2 Decor Add-ons – Organizers, inserts, and new modules are always being added at [JERRARI3D.com](https://www.jerrari3d.com/).  

---

### Instructions
1. Push M3 nuts into the slots on handles or knobs.  
2. Slide the faceplate into position on your GEN2 Decor Drawer.  
3. Insert an M3 screw from inside the drawer, through the faceplate, and into the handle’s nut to secure it in place.  

*Note:* Some handle designs include self-tapping screw versions, so M3 nuts are not always required.  

---

### Slicing Tips
Both 3MF and STL files are included.  
- The 3MF file is pre-sliced and ready to print (just select your printer).  
- When using the STL file, split it into parts for multi-color printing.  
- Works in PrusaSlicer, Bambu Studio, and similar slicers.  
- Prints face down for textured build plates or face up—no supports required.  

---

### Updates
**2025-10-04** – Recreated all models from the ground up to support the latest faceplate design, now compatible with all Decor Drawer sizes including 3W and 4W units.  

---

### License
The Non-Commercial license applies only to selling printed models.  
You’re absolutely welcome to use my designs in commercial environments—I actually encourage you to use them anywhere you see fit! 👍  


GEN2 Decor - Faceplates - Chevron

1W-1H - V2 - Handle.stl

1W-2H - V2 - Handle.stl

1W-05H - V2 - Handle.stl

1W-15H - V2 - Handle.stl

2W-1H - V2 - Handle.stl

2W-2H - V2 - Handle.stl

2W-05H - V2 - Handle.stl

2W-15H - V2 - Handle.stl

3W-1H - V2 - Handle.stl

3W-05H - V2 - Handle.stl

4W-1H - V2 - Handle.stl

4W-05H - V2 - Handle.stl

1W-1H - V2 - Handle.3mf

1W-2H - V2 - Handle.3mf

1W-05H - V2 - Handle.3mf

1W-15H - V2 - Handle.3mf

2W-1H - V2 - Handle.3mf

2W-2H - V2 - Handle.3mf

2W-05H - V2 - Handle.3mf

2W-15H - V2 - Handle.3mf

3W-1H - V2 - Handle.3mf

3W-05H - V2 - Handle.3mf

4W-1H - V2 - Handle.3mf

4W-05H - V2 - Handle.3mf

1W-1H - V2 - Knob.stl

1W-2H - V2 - Knob.stl

1W-05H - V2 - Knob.stl

1W-15H - V2 - Knob.stl

2W-1H - V2 - Knob.stl

2W-2H - V2 - Knob.stl

2W-05H - V2 - Knob.stl

2W-15H - V2 - Knob.stl

3W-1H - V2 - Knob.stl

3W-05H - V2 - Knob.stl

4W-1H - V2 - Knob.stl

4W-05H - V2 - Knob.stl

1W-1H - V2 - Knob.3mf

1W-2H - V2 - Knob.3mf

1W-05H - V2 - Knob.3mf

1W-15H - V2 - Knob.3mf

2W-1H - V2 - Knob.3mf

2W-2H - V2 - Knob.3mf

2W-05H - V2 - Knob.3mf

2W-15H - V2 - Knob.3mf

3W-1H - V2 - Knob.3mf

3W-05H - V2 - Knob.3mf

4W-1H - V2 - Knob.3mf

4W-05H - V2 - Knob.3mf

When I saw the Strong TPU Strap by Turbopstros (https://www.printables.com/model/1451354-strong-tpu-strap-parametric), I had a vision. That's where this bag comes in. I created my version of the TPU strap which is in this file. 
Join me in creating a stunning, unique tote bag with this 3D-printed kit! This project combines 60 PLA flat rings with flexible TPU straps and a sturdy 3D-printed bag base to form a chic, interwoven design. The final product is a durable and stylish bag, perfect for carrying your essentials. If you choose, you can add a lined pouch for added privacy.

This design is a great way to blend 3D printing with crafting, using simple leather rivets to hold the beautiful braided structure in place.

Assembly Instructions (Braiding and Riveting)
Materials Needed:

60 x PLA Flat Rings (Included in file)
1 x Bag Base (Included in file) printed with fuzzy skin
TPU Strips (Print 4 of the included TPU strip file)
2 pieces @ 43" (Handle Strips)
5 pieces @ 25.5" (Horizontal Body Strips)
8 pieces @ 13" (Vertical Body Strips)
34 pairs of 6mm leather rivets

Tools: Hole punch, scissors, and rivet pliers (recommended for easier access).

Detailed Video Instruction: For a step-by-step visual guide, please check out the linked video instruction on my YouTube channel

Assembly Steps:

Prepare the Strips: Cut the 4 printed TPU strips into the lengths specified above for the handles, horizontal body, and vertical body strips.

Attach Handles and Vertical Strips to Base: Slide the 2 handles and the 8 13-inch strips into the slots around the bag base. Punch holes and attach these strips evenly around the perimeter of the bag base using a total of 24 leather rivets (12 pairs). Ensure the strips are secured.

Start the Braiding (Horizontal): See video.  After each round, you'll need to connect the 25.5 inch strip with a pair of rivet. 8 pairs on each side of the bag. 

Weave and Secure the Rings: Continue adding the PLA rings and weaving the horizontal strips, working your way up the bag. The rings should be held in place by the tension of the interwoven strips.

Secure Horizontal Strips: Once the main body is woven, secure the ends of the five horizontal strips to a vertical strip or the bag base using the remaining 12 leather rivets. The weaving action itself is the primary mechanism holding the bag together.

Interwoven Rings and Strap Tote Bag

straps and circle bag.3mf

Custom

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

IKEA VAPPEBY GRID Kit // Cover, Volume Dial, and Handle

Decor N' Store

GEN2 Decor - Faceplates - Chevron

Interwoven Rings and Strap Tote Bag